Jason.L Quadro Wood A leg User manual

ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Dry Bar frame
Page 1 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
Sizes:
2400L x 1200W mm
3000L x 1200W mm
3600L x 1200W mm

ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Dry Bar frame
Table top x2
Leg Quadro A ( Half leg cross beam ) x2
Intermediate Leg Quadro A (Half leg cross beam ) x1
Leg wood add on x6
Leg bottom beam x3
Upper beam x2
Lower beam x2
Plastic bracket x8
Feets or Wheels x6
**
**
A
B
C
D
E
F
G
H
I
Allen key x2Q
M8x20MM CSK x12
M8x20MM socket head x4
M6x20MM socket head x8
M6x30MM socket head x8
Pins x4
Corner pads x6
Mushroom head M6x30 x6
J
K
L
M
N
O
P
COMPONENTS
SCREWS
Page 2 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
H
I
A
B
D
E
C
J K L M N
O
P
G
F
**
If you purchase with wheels option
Colour of the beam is always black, regardless desk frame colour.
*
*

Page 3 of 10
Insert the Leg wood add on (D) into the Leg
Quadro A (Half leg) (B) and also intermediate
leg (C). Using Allen Key provided, attach
mushroom head screws (P) for all legs.
You will notice two colored stickers
located on each exterior leg.
Both exterior legs must have the colour
sticker facing away from where the
plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Dry Bar frame
Need help!
Call us on
1300 527 665
www.jasonl.com.au
B
D
STEP 01
B
P

Page 4 of 10
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Dry Bar frame
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 02
Now use corner pads (O) to cover the holes
where just inserted the head screw sockets.
Insert the Leg bottom beam (E) into the Leg wood add on (D),
using Pins (N) provided. Attach on each leg.
O
B
N
E
D

K
L
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Dry Bar frame
STEP 01
Using Allen Key provided, attach 2 plastic brackets (H) per exterior leg (as
per picture above) using M6x20MM (L) Socket head screw. Attach 4 plastic
brackets (H) to the Intermediate leg (C) using M6x20MM (L).
Screw the feets or wheels (if you purchase with wheels option) (I) to the
bottom of each Leg wood add on (D).
STEP 02
Page 5 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
TOP VIEW
Using Allen Key provided, attach M8x20MM Socket head (K)-
screw socket half way into legs.
I
B
D
E
C
H

ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Counter table
with intermediate legs
Page 6 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
F
STEP 03
Adjust extendable beams (F) to desired
length using markers and secure beams
at that length using screws provided.
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50

G
ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Dry Bar frame
STEP 04
Adjust extendable beams (G) to desired length.
Remove plastic inserts
Loosen 2 bolts on beam using allen key
Extent lower beam to the same distance as upper beam
Insert plastic inserts back into the beams
Page 7 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
2
2
2
4
1
1
1
3
3

ASSEMBLY INSTRUCTIONS
Quadro Wood A leg
Dry Bar frame
STEP 05
TOP VIEW
STEP 06
Page 8 of 10
Need help!
Call us on
1300 527 665
www.jasonl.com.au
J
F
J
Attach Upper Beams (F) to legs using nut insert.
See point attached
Frame looks like this. Using Allen Key, attach Upper Beams (F)
with Sockets (J).
F