JAXJOX KettlebellConnect 2.0 User manual

USER MANUAL
JJ15000

LANGUAGES
English ................................................................................................................. 4
Français .............................................................................................................. XX
Italiano ............................................................................................................... XX
Pусскии ............................................................................................................. XX
Deutsche ........................................................................................................... XX
Português .......................................................................................................... XX
Turk ................................................................................................................... XX
Español ............................................................................................................. XX
한한한 ................................................................................................................. XX
한한한한 ............................................................................................................... XX
한한한한 ............................................................................................................... XX
........................................................................................................................... XX
3

TABLE OF CONTENTS
Congratulations ................................................................................................... 5
What’s In The Box ................................................................................................. 5
Assembly.............................................................................................................. 6
Using Your KettlebellConnect™ 2.0 ....................................................................... 8
Troubleshooting.................................................................................................. 12
Safety Warnings................................................................................................... 14
Satisfaction Guarantee........................................................................................ 15
Limited Warranty................................................................................................. 15
Liability Statement ............................................................................................. 16
How To Obtain Warranty Service......................................................................... 16
Questions Or Concerns ...................................................................................... 16
Notices ............................................................................................................... 17
Disclaimer........................................................................................................... 17
4

Congratulations
What’s In the Box
Congratulations on your purchase of the JAXJOX®KettlebellConnect™ 2.0,
a six-in-one digital kettlebell. The KettlebellConnect 2.0 comes equipped with
commercial-grade nylon ber, real-time data tracking, and 14 hours of battery
life. Its elegant design and advanced technology result in a single kettlebell that
adjusts from 12lbs (5.4kg) to 42lbs(19kg) in seconds. By connecting the kettlebell
to the JAXJOX App, you can set your goals, track your workouts, and see your
tness progress with JAXJOX®Fitness IQ™ .
This product manual will help you better understand the equipment. Read and understand
the contents of this manual before attempting to use the KetllebellConnect™ 2.0. Please
keep this manual for future reference.
Carefully remove all items from the box and place them on the oor prior to
assembly. Verify that all of the components have been included.
This product needs to be charged and activated before rst use. It is recommended to
fully charge the battery before use, this takes about 3 hours.
Should you nd any parts missing, return the product to your point of purchase or contact
JAXJOX®via email at [email protected]
Kettlebell Shell (x1)
Base (x1)
Weights (x5) Charging Cable (x1)
5

Assembly
Place the base on a solid, level oor.
We recommend using and storing your kettlebell on the oor to minimize the risk
of injury.
Charge the KettlebellConnect™ 2.0
• Plug the USB cable into a USB Power Adapter.
• Plug the USB-C end of the charge cable into the base of the
KettlebellConnect™ 2.0.
• Plug the adapter into a functioning power outlet.
When the base battery is low, the display
will show the following screen:
When the shell battery is low, the display
will show the following screen:
6

Stack the weights one at a time.
• Facing the base’s screen, place the weights on the base in reverse order,
starting with 5 (on the bottom) and ending with 1 (on the top).
• Ensure the notches on the weights align with the notches on the base. The
number on the weight should appear right side up.
• Seat the weights completely, ensuring there are no spaces in between each
of the weights.
Place the kettlebell shell onto the base.
• Lower the kettlebell shell over the top
of the weights, ensuring the JAXJOX
Logo is either facing toward the LCD
screen, or the charge port.
• You should not need any additional
force to seat the kettlebell shell in the
base, when all of the components are
properly aligned.
• When properly seated and ready for
use, the unit will beep once.
IMPORTANT: All ve weights must be stacked in the correct order for the unit to function
properly. Incorrect assembly of the weights and kettlebell shell may result in damage to the
unit or serious injury.
7

Download the app.
The JAXJOX®KettlebellConnect™ 2.0 is compatible with mobile devices that
support iOS and Android. To get the most from your KettlebellConnect™ 2.0,
install the JAXJOX®App. Visit jaxjox.com/support for more information and
instructions on how to use the app.
Bluetooth Connection
• Make sure that Bluetooth is enabled on your phone.
• Open the JAXJOX App to connect via Bluetooth.
Using Your KettlebellConnect™ 2.0
Activate the KettlebellConnect™ 2.0.
1. Press either the ( - ) or ( + ) on the base to activate the kettlebell.
2. The screen will display a Bluetooth logo to remind you to connect the
kettlebell with your mobile device and the JAXJOX®app.
Get to Know the LCD Display
1. Base battery icon. The icon will be animated
when charging, and will be solid when the
battery is fully charged.
2. Shell battery icon. The icon will be
animated when charging, and will be solid
when the battery is fully charged.
3. Weight setting. Number displayed is the
amount of weight loaded onto the shell.
4. Weight unit icon. Will display LB or KG,
dependent on which unit of weight is being used.
8
4321

Changing the unit of measurement.
The unit of measurement you select is located in the upper right corner of the
screen.
To change the unit of measurement between pounds and kilograms (LB or KG),
press the [+] button for 3 seconds. The weight icon will ash. Press the [+] to
change the weight unit of measure.
Adjust the weight of the kettlebell.
• Press the [+] or [-] button to choose the desired weight for your workout.
• The KettlebellConnect™ 2.0 can be adjusted from 12 lbs (5.4 kg) to 42 lbs
(19 kg) in increments of 6 lbs (2.7 kg).
• Note that you can cycle through the available weight continuously, meaning if
the kettlebell is set to 42 lbs (19kg), you can quickly change to 12 lbs (5.4 kg)
by pressing the [+] or [-] button.
• The KettlebellConnect™ 2.0 takes approximately 3 to 5 seconds to change to
your selected weight. The weight loading animation plays while the weight is
adjusting. Do not move the KettlebellConnect™ 2.0 while it is adjusting.
• The KettlebellConnect™ 2.0 will beep once when ready for use.
9

Making sure your shell is connected.
If your shell is properly seated on the base, the battery icon will be displayed on
the LCD screen. If the shell removed from the base, improperly seated, or does
not have a charge, the battery icon will not be displayed.
Working out with the kettlebell.
Before starting your workout, ensure your environment is free of anything that
may interfere with your movements. Do not drop or use excessive force when
using the kettlebell.
IMPORTANT: Do not attempt to adjust any of the mechanisms on the underside of the
kettlebell shell. Do not attempt to manually adjust the weight of the kettlebell shell. Doing so
may result in serious injury and/or device malfunction.
Lifting the shell off the base.
When selecting the weight, wait for the single
beep before lifting the shell.
IMPORTANT: Always lift the shell vertically, clearing
the weights and base before attempting to use it.
Not doing so may result in serious injury.
Reminder: If the shell and base haven’t connected in 24 hours, the display will remind you to
return the shell to the base. In this case you will be unable to change weights until the shell
has been properly seated back on the base.
10

Returning the shell to the base.
• Avoid using excessive force when
reseating the shell onto the base.
• Ensure the shell and weights are aligned
properly with the base when reseating.
You should not need any additional
force to reseat the shell when all of the
components are properly aligned.
• The KettlebellConnect™ 2.0 will beep once
when properly seated.
Resetting the KettlebellConnect™ 2.0.
• If you are experiencing issues with your kettlebell, resetting the device may
correct them.
• To reset the kettlebell, press the reset button on the underside of the base,
highlighted in the diagram.
Sleep mode.
• When not in use, the unit enters into sleep mode after 20 seconds, and the
backlight turns off.
RESET BUTTON
11

12
Troubleshooting
Low battery.
• Make sure the unit has been charged.
• Verify that the charging cable is fully inserted into the base and the power
adapter. Ensure that the cable is functioning properly, switching cables if
unsure.
• Verify that the power adapter is plugged into a functioning power outlet. Ensure
that the power adapter is functioning properly, switching adapters if unsure.
• Make sure the shell is properly seated on the base.
Bluetooth is not connecting.
• Verify the KettlebellConnect™ 2.0 has been added in the JAXJOX®App
• Verify Bluetooth is enabled on your phone.
• For further troubleshooting, please visit jaxjox.com/support.
WARNING: Manually adjusting the weight of the kettlebell shell may cause serious injury or
damage to the device. It may also cause a mismatch between the weight of the kettlebell
shell and the base, causing the device to become inoperable. In this event, follow all safety
precautions noted before attempting to x the issue.
IMPORTANT: Perform these actions low to the ground and keep all body parts out of the
direct path of the kettlebell weights.
BASE BATTERY LOW SHELL BATTERY LOW

13
Kettlebell weight is not adjusting.
• Ensure the shell is properly seated before adjusting the weight. The unit will
beep once when properly seated.
• Verify the weights are stacked correctly, in the right order. Following the
instructions in the “Assembly” section.
• The weight of the kettlebell shell may be misaligned with the weight on
the base. Follow the instructions below in the “Shell and base weight
misalignment.” section.
KettlebellConnect 2.0 does not beep when the shell is reseated.
• When reseating the shell, ensure it is aligned correctly with the base. The
handles should align with the wings on the base.
• Ensure the shell is properly seated. It should sit fully against the base,
without space in between.
• Verify the weights are stacked in the right order. Follow the instructions in the
“Assembly” section.
• The weight of the shell may be misaligned with the weight on the base.
Follow the instructions below in the “Shell and base weight misalignment.”
section.
Shell and base weight misalignment.
• Remove the shell from the base.
• Press and hold the [+] and [-] buttons together
for 5 seconds, or until you see a “0” displayed
on the screen.
• Adjust the display number to the number of
weights on the base. Example: If there are
3 weights on the base, then set the display
number to 3.
• Reseat the shell on the base. When the unit
beeps, and weight can be changed properly,
the shell and base have been realigned.

Product Parameters
Product model: JJ15000
Base size: LWH - 10.5 x 11.25 x 4.75 IN / 26.5 x 28.5 x 12 CM
Device size: LWH - 9 x 8.25 x 12.5 IN / 23 x 21 x 32 CM
Product Weight: 45 Lb / 20.5 Kg
Wireless connection: Bluetooth
APP: iOS 13.0+; Android 5+
Always store your product on the ground, in a at place, to ensure that is not a
falling or tripping hazard. Before starting your workout, ensure your environment
is free of anything that may interfere with your movements.
When moving the KettlebellConnect™ 2.0, disassemble all of the parts and
reassemble them in the new location. Do not attempt to move the entire unit at
one time.
Consult your physician before starting a workout plan. If you experience
faintness, pain, or shortness of breath, stop exercising immediately, and consult
a physician.
Select an intensity level that is appropriate for your tness level and warm up
before each workout.
The KettlebellConnect™ 2.0 is not a toy. Do not allow children or pets to play with
or around the device. Supervise and provide instruction to anyone under the age
of 18 using the product.
Ensure weights are properly seated in the correct order.
Avoid using excessive force when reseating the kettlebell shell into the base.
Ensure the kettlebell shell and weights are aligned properly with the base when
reseating. It should not require any additional force when all of the components
are properly aligned.
Do not drop the kettlebell or use excessive force when using the kettlebell. Do
not move the KettlebellConnect™ 2.0 while the weight is being adjusted.
The KettlebellConnect™ 2.0 can be used both indoors and outdoors, under the
proper conditions. Do not use this product outside in temperatures that are hot
Safety Warnings
14

If you are not satised with your JAXJOX®KettlebellConnect™ 2.0 (hereafter
referred to as the “Product”) for any reason, you must contact JAXJOX by email
at [email protected], within 30 days of delivery. Returned Product(s) must
be in good physical condition (not broken or damaged). All product components
originally included with your purchase must be included with your return. Returns
found to be broken, damaged, or missing any part(s) may be subjected to
additional fees. Shipping and handling charges, gift wrap fees, and taxes paid
(such as state, customs, or VAT) are not refundable. You are responsible for all
shipping charges and you assume the risk of loss or damage to the returned
Product(s) while in transit back to JAXJOX®.
or cold enough to damage the electronics. Avoid using it near water, or in high
humidity areas such as a sauna or steam room.
Prior to cleaning, unplug the KettlebellConnect™ 2.0. To clean the shell, use a
dry or slightly damp cloth. Avoid using detergents. Avoid water coming in contact
with the base, as it contains sensitive electronics.
JAXJOX®warrants to the original purchaser that your KettlebellConnect™ 2.0
(hereafter referred to as the “Product”) shall be free from defects in materials
and workmanship under normal use for a period of one (1) year from the date of
delivery.
If such a defect arises and a request is received by JAXJOX®within the
applicable Warranty Period, JAXJOX®will, at its option and to the extent
permitted by law, either (1) repair the Product at no charge, using new or
refurbished replacement parts or (2) replace the Product with a new or
refurbished Product. In the event of such a defect, to the extent permitted by law,
these are your sole and exclusive remedies. Shipping and handling charges may
apply except where prohibited by applicable law. This Limited Product Warranty
is valid only in the jurisdictions where the Products are sold by JAXJOX®itself or
through its authorized reseller or agent and is valid to the extent permitted by the
applicable laws of such jurisdictions. Any replacement Product will be warranted
for the remainder of the original warranty period or thirty days, whichever is
longer, or for any additional period of time that may be required by applicable law.
30-Day Returns Policy
Limited Warranty
15

JAXJOX®stands behind the quality of our product. We hope that our beautifully
designed, interconnected tness products and accessories meet your needs
and get you where you want to be. If you need assistance or are experiencing
issues with your product, please contact us at [email protected] for help and
answers.
User Manual Published 2021 - The content of this manual is subject to change
due to the manufacturer’s ongoing research and development plans, without
prior notice. For the most updated version, please visit our Support Page at
www.jaxjox.com.
Questions or Concerns
16
To be eligible for service under this Limited Warranty you must contact JAXJOX®
at [email protected]. JAXJOX®will require you to provide proof of purchase
details and/or comply with other requirements before receiving warranty service.
Claims must be made within the specied warranty period.
The products are subject to change due to the manufacturer’s ongoing research
and development plans without prior notice.
Our Company makes no representations or warranties as to this user manual or
the product we described.
Our Company shall not be liable for any direct or indirect, accidental or special
damages, losses or expenses arising out of or in connection with this user
manual or the product we described.
How to Obtain Warranty Service
Liability Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help. This device meets the
FCC requirements for RF exposure in public or uncontrolled environments.
Notices
17

CONTACT US:
JAXJOX®Inc
8720 148th Ave NE Redmond,
WA 98052
USA
[phone]
[email protected]