Jaypro Sports TOTEMASTER PLUS User manual

JAYPRO SPORTS
TOTEMASTER PLUS, TE-60
LIST OF MATERIALS
PIECE NO. PART NO. DESCRIPTION QTY.
1 END PANEL 2
2 SIDE PANEL WITH COVERS 1
3 BOTTOM PANEL 1
4 CENTER PANEL 1
5 SIDE PANEL 1
6 PAN HEAD PHIL M6 x 22MM 12
7 CS0007 CASTER SOCKET 4
8 CS0006 CASTER STEM 4
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: PHILLIPS HEAD SCREWDRIVER
RUBBER HEAD MALLET
1) ALIGN ONE END PANEL (1) WITH BOTH SIDE PANELS (2 +5) AND
LOOSELY ASSEMBLE USING THE ROUND HEAD SCREWS (6). MAKE
SURE THE SIDE PANEL WITH COVERS (2) IS PROPERLY POSITIONED
SO THE COVERS WILL CLOSE CORRECTLY.
2) LAY THE BOTTOM PANEL (3) INTO PLACE MAKING SURE THE WIRE
GRID TABS FIT ONTO EACH SIDE PANEL (2+5) AS SHOWN IN VIEW A-
A. POSITION THE CENTER PANEL (4) SO IT RESTS ON THE BOTTOM
PANEL (3) AND LOCKS ONTO EACH SIDE PANEL (2 +5).
3) ALIGN THE SECOND END PANEL (1) AND FASTEN IN PLACE WITH THE
HARDWARE PROVIDED. TIGHTEN ALL FASTENERS FIRMLY. LAY
UNIT ONTO ITS SIDE AND ASSEMBLE SOCKET INSERTS (7) AND
CASTERS (8).