jbc DRH User manual

Heating Element
for DR560
DRH
INSTRUCTION MANUAL
www.jbctools.com

DS360
DR560
DR560
DR560
DR560
DR560
Changing the heating element
Packing list
1. Removing
Loosen the deposit lid (a), remove the screw (b) and withdraw
the heating element (c).
For this operation, turn off the station or disconnect the tool
and wait until the tool temperature drops to room temperature.
Recommended: Follow also the cleaning guidelines mentioned in the
tool and station manuals.
The following items are included:
Heating element ............1 unit Internal gasket ...............1 unit
Ref. 0019208
This manual corresponds to the following reference:
DSV-DR
a
c
b
Heating
Elemet
Screw Deposit
Lid
2

DS360
DR560
DR560
DR560
DR560
DR560
DS360
DR560
DR560
DR560
DR560
DR560
DS360
DR560
DR560
DR560
DR560
DR560
DS360
DR560
DR560
DR560
DR560
DR560
washer
Important: Make sure the
internal gasket is inserted into
the glass solder collector.
Compatibility
The DRH also works with
the previous desoldering iron
version DR5600 (Ref. 5600010).
In this case, you must take off
the washer with a pliers.
2. Placing
Insert the new heating element (a), tighten the screw (b) and
then the deposit lid (c).
!
mark
For a proper connection,
it is essential to insert the
cartridge so that it aligns with
the mark .
c
b
a!
Heating
Elemet
Screw Deposit Lid
Internal
Gasket
3
www.jbctools.com

DRH
Heating Element for DR560
Ref.: DSV-DR
- Total Net Weight: 26 g / 0.057 lb
- Package Dimension/Weight: 127 x 31 x 31 mm / 35 g
(L x W x H) 5 x 1.22 x 1.22 in / 0.077 lb
Complies with CE standards
ESD Safe
Specifications
0008959-100123
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement of
defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
www.jbctools.com