jbc CL9885 User manual

Tip Cleaner
Ref. CL9885
www.jbctools.com

2
Improve thermal transfer by cleaning the tip after each solder joint.
Features
Packing list
Brass Wool
Ref. CL6210
Splashguard
Non-slip base
Sponge
Ref. S0354
Wiper
Ref. CL0236
Very effective cleaning method.
It leaves a small layer of
solder on the tip to
prevent oxidation
between cleaning
and rewetting.
It prevents splashing of
solder particles when using
the wool.
No need to hold the base
while cleaning tips.
The least harmful cleaning method.
Keep the sponge damp with distilled
water when working to avoid tip wear.
A temperature resistant tray lets the operator
remove excess solder by gently tapping or
wiping.
Tapping: Wiping:
Tap gently to remove
excess solder.
Use the slots to remove
remaining particles.
Sponge ..............................1 unit
Ref. S0354
Tip Cleaner ...................... 1 unit
Ref. CL9885
Manual .............................. 1 unit
Ref. 0006349
Tip Cleaner
Ref. CL9885
The following items should be included:
www.jbctools.com

3
Wiper can be easily
removed for cleaning.
Optional
Replacing Inox Wool
Replacing Metal Brush Replacement
Replacing Wiper Replacement
Inox Wool
Ref. CL6205
Metal Brush
Ref. CL6220
Tip-Tinner
Re f. T T-A
Sand
Re f. C L6211
1
1
1
3
2
2
4
4
3
www.jbctools.com

0006349-0815
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be
valid, equipment must be returned,
postage paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Specifications
- Weight and dimensions:
0.9 kg (1.9 lb) / 110 x 90 x 90 mm
www.jbctools.com