Jegs 10685 User manual

User Guide for 10685
Professional Wire Tie Gun
For up to 1/4in. Plastic/Nylon Cable Ties

Read Before Installation
Warning
Thank you for your purchase of the Professional
Cable Tie Gun.
Before using, please inspect the tool for any damage
and check the movement and tension adjuster. If any
components are damaged please contact customer
service at: 1.800.345.4545.
This gun is intended to let you tighten cable ties
to the adjustable tension and cut off excess.
If you are having issues, or have questions
regarding the use of this tool, please contact our
technical support department at: 1.800.345.4545.
Return Information: Before modifying any part of
this tool. Once this tool has been modified it will
not be accepted for return.
• Pinch hazard. Keep fingers away from the gun’s
moving parts.
• For use with only plastic and nylon cable ties.
[This will not work on metal cable ties.]
• Shock hazard. Use caution when working with
wiring. Do not use this tool near live electrical
sources.
1
Operation
• Using the adjustment knob, set the tension
between 0-3. The number is visible in the sight
glass on the handle (see image below). Turn
clock-wise to increase tension.
• Loop cable tie around object to be secured. Insert
free end into the end of the tool jaw.
• Locate the cable tie latch end to the tool jaw end.
• Pull trigger repeatedly until the cable tie is tightened
to the desired tension. When the set tension is
reached, the guillotine blade with automatically
cut off the excess cable.
Site Glass
(0-3 Settings)
Adjustment Knob
(Clock-wise to
increase tension)