Jetson Spark Light-Up Training Wheels User manual

Spark Light-Up Training Wheels
A guide for your ride.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODELS: JSPARK-BLK

Jetson's top two riding rules:
Be safe. Have fun!

5
Contents
....................................................................................................................6
................................................................................................................7
...................................................................................................................9
..................................................................................................................10
..................................................................................................................11
...................................................................................12
......................................................................................14
.....................................................................................19
.............................................................................................................20
Safety Warnings
Warranty Coverage
What's in the Box
Specs & Features
Online Resources
1. Getting Started
Attach the Wheel to the Wheel Bracket
Attach the Wheel Bracket to the Bike
2. Making Moves
Getting Going & Keeping Momentum
Care & Maintenance

6
Safety Warnings
• WARNING: CYCLING CAN BE DANGEROUS. BICYCLE PRODUCTS SHOULD BE INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC. NEVER MODIFY
YOUR BICYCLE OR ACCESSORIES. READ AND FOLLOW ALL PRODUCT INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION ON THE MANUFACTURER’S
WEBSITE. INSPECT YOUR BICYCLE BEFORE EVERY RIDE. ALWAYS WEAR A HELMET.
• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be
responsible for any loss or damage caused by improper use.
• Before each cycle of operation, the operator shall perform the preoperation checks specied by the manufacturer: That all guards and pads originally supplied
by the manufacturer are in proper place and in serviceable condition; That the braking system is functioning properly; That any and all axle guards, chain
guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition; That tires are in good condition, inated properly, and
have sucient tread remaining; The area that the product is to be operated should be safe and suitable for safe operation.
• The child rider should wear protective clothing while riding, including an approved helmet and shoes
• Ensure that all parts of the bicycle and training wheels are securely tightened and in good condition before each ride.
• Do not remove the stabilizer brackets. Doi.ng so may allow the brackets to turn or become damaged, resulting in a fall.
• Training wheels prevent bicycles from achieving their regular lean angle when turning. Turning suddenly or at a fast speed may cause a fall. Teach the child rider
to ride and turn slowly and monitor their riding.
• Ensure that the bicycle is the correct size for the rider and that the saddle height and handlebar are adjusted appropriately• Components shall be maintained
and repaired in accordance with the manufacturer’s specications and using only the manufacturer’s authorized replacement parts with installation performed
by dealers or other skilled persons.
• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive train, while the motor is running.
• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction (IEC 60335-1/A2:2006).
• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
• Adult supervision is required.
• The rider should not exceed 198 lb.
• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause uncontrolled operator/
passenger actions or reactions.
• Never use near motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes. Bicycle may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
• Avoid riding around ammable gas, steam, liquid, or dust that could cause re.
• Operators shall adhere to all of the manufacturer’s recommendations and
• instructions, as well as comply with all laws and ordinances: Units without headlights shall be operated only with adequate daylight conditions of visibility, and;
Owners shall be encouraged to highlight (for conspicuity) using lighting, reectors, and for low-riding units, signal ags on exible poles.
• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women; Persons with head, back, or neck
ailments, or prior surgeries to those areas of the body; and persons with any mental or physical conditions that may make them susceptible to injury or impair
their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent
in unit use.
• Do not ride at night.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Never operate the product barefooted.
• Always wear shoes and keep shoelaces tied.
• Make sure your feet are always placed securely on the deck.
• Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certication, and any other equipment
recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, and elbow pads.
• Always give way to pedestrians.
• Be alert to things in front and far away from you.

7
• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
• The product cannot be ridden by more than one person.
• When you ride the product along with other riders, always keep a safe distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
• The brake may become hot while operating, do not touch the brake with your bare skin.
• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may
result in injury or death.
• If the brake loosens, please adjust with the hexagon wrench, or please contact Jetson Customer Care.
• Replace worn or broken parts immediately.
• Check whether all safety labels are in place and understood before riding.
• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate all components of the unit
before use.
• Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or turn abruptly.
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
California Proposition 65
WARNING:
This product can expose you to chemicals including Chromium (hexavalent compounds),
which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to:www.P65warnings.ca.gov.
Warranty Coverage
GENERAL LIMITED WARRANTY
Your new Jetson product is warranted against defects in materials and workmanship as indicated on
ridejetson.com/warranty for a period of time from the date of original retail purchase when used in accordance with
Jetson's user manuals (refer to ridejetson.com/support). Under this warranty, you will be able to direct your
claims to Jetson even in situations where you purchased the Jetson Product from one of our authorized
retailers. To read the full terms of our warranty, visit ridejetson.com/warranty.

8

9
What's in the Box
1. 2 WHEELS
2. 2 BRACKETS
3. 2 BRACKET
4. STABILIZERS
5. 2 SHOULDER
6. BOLTS
7. 4 WASHERS
8. 2 NUTS
TOOL INCLUDED:
ALLEN KEY X 1 WRENCH X 1

10
Specs & Features
·PRODUCT DIMENSIONS: 4” (L) × 4” (W) × 10” (H)
·WHEEL SIZE: 4”
·PRODUCT WEIGHT: 2 LBS
·MAX WEIGHT: 198 LBS
·RECOMMENDED AGE: 3+
COMPATIBILITY & INTENDED USE:
INTENDED FOR USE WITH MOST BIKES WITH 12”, 14”, 16”, 18”, AND 20” WHEELED BICYCLES THAT USE A SOLID AXLE WITH
NUTS THAT ATTACH TO THE REAR WHEEL IN THE FRAME.
NOTE: AXLE EXTENDERS (NOT INCLUDED) MAY BE NECESSARY FOR INSTALLATION OF THESE TRAINING WHEELS ON
SOME 20” BIKES.

11
Scan for our most updated
Spark Light-Up Training
Wheels onboarding materials
and support resources.
Online Resources
WARNING:
FAILURE TO COMPLY WITH THE FOLLOWING INSTRUCTIONS MAY RESULT IN INJURY TO THE CHILD OR OTHERS.
• KEEP SMALL PARTS AWAY FROM CHILDREN DURING ASSEMBLY.
• ACCESSORY MUST BE ASSEMBLED AND REMOVED BY AN ADULT.
• FREQUENTLY INSPECT THE PRODUCT FOR DAMAGE.
* ADULTS MUST ASSIST CHILDREN IN THE ASSEMBLY AND INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.

12
·ATTACH THE WHEEL TO THE WHEEL BRACKET USING SHOULDER BOLT, 2 × WASHERS AND NUT.
1.1 Attach the Wheel to the Wheel Bracket
1. Getting Started
SHOULDER BOLT WASHER WASHER NUT

13
·TIGHTEN BOLT & NUT, MAKING SURE THE WHEEL
ROTATES SMOOTHLY.

14
1.2 Attach the Wheel Bracket to the Bike
·ON THE WHEEL BRACKET FIND THE HOLE THAT CORRESPONDS TO YOUR BIKE’S WHEEL SIZE.
WHEEL BRACKET
20˝
18˝
16˝
14˝
12˝

15
·REMOVE AXLE NUT FROM BIKE’S REAR WHEEL.
BICYCLE IS NOT INCLUDED.
AXEL NUT

16
·INSERT STABILIZER BRACKET BEHIND SELECTED WHEEL BRACKET HOLE.
STABILIZER BRACKET

17
·PLACE STABILIZER BRACKET AND WHEEL BRACKET ONTO THE AXLE.
TIGHTEN AXLE NUT USING A WRENCH.
·REPEAT PROCESS ON OTHER SIDE OF THE BIKE.
·ONCE BOTH BRACKETS ARE CONNECTED, MAKE SURE THEY ARE
TIGHTLY SECURED.
FOR INSTALLATION ON SOME 20” BIKES, YOU MAY NEED TO USE AN AXLE EXTENDER. (NOT INCLUDED)
*
*

18
·THE TRAINING WHEELS SHOULD EXTEND A MINIMUM OF 175MM FROM THE CENTER OF THE BICYCLE’S REAR WHEEL.
·MAKE SURE THERE IS NO MORE THAN 25MM OF CLEARANCE BETWEEN EACH WHEEL AND THE GROUND.
25MM
175MM

19
·NOW YOU HAVE YOUR TRAINING WHEELS ATTACHED, IT’S TIME TO GO OUT AND SHOW OFF YOUR RIDE. YOUR LIGHTS WILL
TURN ON ONCE YOU START RIDING.
2.1 Getting Going & Keeping Momentum
2. Making Moves

20
Care & Maintenance
IT’S IMPORTANT TO REGULARLY CLEAN AND LUBRICATE BETWEEN THE WHEEL AND SUPPORT BRACKET. BEFORE EACH RIDE
CHECK ALL BOLTS AND NUTS FOR PROPER TIGHTNESS. CONTACT YOUR LOCAL DEALER FOR APPROPRIATE REPLACEMENT
PARTS. TRAINING WHEELS ARE INTENDED FOR USE WITH MOST 12, 16, 18, OR 20” WHEELED BICYCLES THAT USE A SOLID AXLE
WITH NUTS THAT ATTACH THE REAR WHEEL IN THE FRAME. RECOMMENDED FOR AGES 3 YEARS AND UP. MAXIMUM RIDER
WEIGHT IS 198 LB.
WARNING: EXCEEDING RIDER WEIGHT MAY CAUSE THE PRODUCT TO BEND OR BREAK, RESULTING IN A FALL. THIS
PRODUCT IS NOT INTENDED FOR USE BY ADULTS OR RIDERS WEIGHING MORE THAN 198 LB.
FEW MUST-DO’S
·KEEP AWAY FROM FIRE AND EXCESSIVE HEAT.
·AVOID INTENSE PHYSICAL SHOCK, SEVERE VIBRATION, OR IMPACT.
·PLEASE RIDE ON A SMOOTH, FLAT SURFACE.
·PROTECT FROM WATER OR MOISTURE.
·CONTACT JETSON CUSTOMER CARE IF THERE ARE ANY ISSUES WITH YOUR SPARK LIGHT-UP TRAINING WHEELS AT
SUPPORT.RIDEJETSON.COM
STORAGE
·STORE IN A DRY PLACE.
·COVER TO PROTECT AGAINST DUST.