Jofran 775-4820 User manual

jOFRAN INC.
Made in Vietnam
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may
have come loose inside the carton during shipment.
No Code Qty Description No Qty
Description
Parts key
1
2
3
5
A
B
C
D
8 pcs
8 pcs
2 pcs
2 Sets
4 pcs
8 pcs
2 Sets
Drawer Complete
Knob w/ Screw
Drawer Stop
Leg
Bolt M6x50mm
Lock washer
Washer
ASSEMBLY INSTRUCTION &
PARTS IDENTIFICATION
MODEL #775-4820
DESK
775-4820P05
775-4820P04
775-4820P05A
775-4820P02
42 Sets Drawer Glide
775-4820P06
Hardware Kit 775-4820P01
D A B
I.
II.
1 pc
Allen key
C
64 pcs Floor Glide
775-4820P01F
7
8775-4820P22H
775-4820P01E
2 pcs Lift top hinge
1 pc Electric outlet
775-4820P22 1 pc Lift top
9

ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
MODEL # 775-370KD
jOFRAN INC.
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose
inside the carton during shipment
No
1
2
3
4
1 pc.
1 pc.
1 pc.
Chair Parts Key
Description
1 pc.
1 pc.
5
Q'ty
Code
4pcs.
6
1 pc.
7
MADE IN VIETNAM Page 1 of 1
Chair Back
Complete Seat
Right Facing Front Leg
Left Facing Stretcher
Right Facing Stretcher
Floor glide
Left Facing Front Leg
775-370KDP40
775-370KDP41
775-370KDP42
775-370KDP44
775-370KDP45
775-370P01F
775-370KDP43
D
E
F
GKey Wrench
Long Bolt 1/4"x 3''.
No
B
C
Hardware kit 775-370KDP46
Description
Lock Washer 5/16"
Short Bolt 1/4"x 1''1/2.
Allen Key
H
Flat Washer 5/16"
A
11 pcs.
11 pcs.
1 pc.
Q'ty
4 pcs.
1 pc.
4 pcs.
Wood Screw 1/6''x 38
3 pcs.
Hexa Nut 5/16" 4 pcs.
STEP 2
ABC
G
F
E
B
C
H
H
CBD
F
- Carefully turn Chair upside down.
Insert the right stretcher into the back
right leg,then position right front leg in
to the front corner block and connect
the stretcher to the front leg
- Place Flat Washer (C), Lock Washer
(B) and Nut (A) on each bolt, and
hand tighten at this point
- Fasten Stretchers with Wood Screws
(H) by hand using a Philips screwdriver
(not provider) ( See Detail C).
Fully tighten the nuts for the front leg.
-Check to be sure all screws and nuts
are tight prior to using Chair.
- Insert the left stretcher into the back
left leg, then position left front leg in to
the front corner block and connect the
stretcher to the front leg.(See Detail C)
- Carefully lay chair back flat on a smooth flat
surface to prevent scratches
- Attach Complete Seat to Chair back by inserting a
Flat Washer (C) Lock Washer (B) with Short Bolt
(E) into each of the hole on the back rail of the
seat, and Long Bolt (D) a Flat Washer (C) and Lock
Washer (B) into each of 2 holes in the Complete
Seat corners. (See Detail A & B)
- Tighten screws with provided Allen Key (F) by turning
clockwise until secure
STEP 1
Detail D Detail C
Detail C Detail A
Detail B
4
6
5
3
6
5
21
FABRIC CARE INTRUCTIONS: Blot gently using a clean
soft damp cloth an mild detergent DO NOT SATURATE
FABRIC CONTENT: 100% POLYESTER-CLEANING CODE W
CRAFTMAN DESK CHAIR ANT NAVY BLUE