Jofran MISSION VIEJO 1966-79TB User manual

jOFRAN INC.
STEP 2
- Turn the Side frame (assembled in step 1) upright, position
the Door frame onto designated location of the Side frame as
shown. Insert the Bolts (B) with Lock Washers (C) & Flat
Washer (D) through pre-drilled holes in wood cleat of Door
Frames and attach to the assembled Side Frame from Step 1
-Attach the bottom panel to the underside of the base by
inserting Bolts (B) with Lock Washers(C) and Flat Washers(D)
through the predrilled holes in the bottom panel
and attach to the cleats on the inside of the side panel.
-Carefully turn the Storage Box to the upright position,
insert the Top Panel (2) Between the legs (See Detail B).
- Carefully place the Leg on the smooth surface.
-Position the Side Panel into designated location of the
Leg as shown. Insert the Bolts (B), with Lock Washers
(C) & Flat Washer (D), through pre-drilled holes in
wood cleat of Side Panel. Tighten securely with the
Allen Key (I). (See Detail A).
- Do the same with other Legs and Side Panel .
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that
may have come loose inside the carton during shipment.
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
MODEL #
Hardware kit (1966-78TP01)
STEP 1
Description Q'Ty
A
B
C
D
E
F
G
H
I
BP08T
BP08B
BP08S
BP07F
BP01D
BP07H
BP04
BP01F
TP13
TP29
TP13L
TP02E
Table Top
Storage Box Top Panel
Storage Box Bottom Panel
Storage Box Side Panel
Two Door w/ Frame
Legs
Door Catch Assembly
Door Hinge
Knob w/Screw
Floor Glide
Extension Mechanism
Mounting Plate
Extension Lock
Leg Extension
Code
No
Parts Key
Q'Ty
Description
1 Pc
1 Pc
1 Pc
2 Pcs
2 Pcs
4 Pcs
4 Sets
8 Pcs
4 Pcs
4 Pcs
1 Sets
2 Pcs
4 Sets
4 Pcs
PAGE 1/2
DETAIL A
DETAIL B
6
REV 23
REV 23

jOFRAN INC.
STEP 3
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that
may have come loose inside the carton during shipment.
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
MODEL #
- Insert Long bolt (A) with Flat washer (D),
Lock washer (C) through the leg extension
and tighten securely with the Allen key (I).
(See Detail C).
STEP 4
FOR COUNTER HEIGHT
TABLE ONLY
- Position the Table top onto the legs of the Storage Box.
- Insert the Hex nut (E) with Lock Washers
(C) & Flat Washer (D) into the fixed bolts of
the leg. Tighten securely with Wrench (H).
- Affix Knob (G) to the Doors, tightening the
screw with a phillips-head screwdriver (not
provided). (See Detail D)
PAGE 2/2
Hardware kit (1966-78TP01)
Description Q'Ty
A
B
C
D
E
F
G
H
I
DETAIL C
DETAIL D
DETAIL E
BP08T
BP08B
BP08S
BP07F
BP01D
BP07H
BP04
BP01F
TP13
TP29
TP13L
TP02E
Table Top
Storage Box Top Panel
Storage Box Bottom Panel
Storage Box Side Panel
Two Door w/ Frame
Legs
Door Catch Assembly
Door Hinge
Knob w/Screw
Floor Glide
Extension Mechanism
Mounting Plate
Extension Lock
Leg Extension
Code
No
Parts Key
Q'Ty
Description
1 Pc
1 Pc
1 Pc
2 Pcs
2 Pcs
4 Pcs
4 Sets
8 Pcs
4 Pcs
4 Pcs
1 Sets
2 Pcs
4 Sets
4 Pcs
REV 23
REV 23