Assembly Instructions
Carefully remove the component parts of the bird table and the screw pack from the box and double check
you have all the contents required. To get the best from this product, please read these instructions
fully before assembly.
Step 1
Take the 2x foot components and insert them together.
Step 2
Place the lower post component in to the socket.
This is the piece without the square post-top.
Step 3
Using 2x 50mm Screws, secure the foot and lower post together.
Step 4
Take 2x 50mm Pan Head Screws and
tightly secure the upper post to the lower
post using a cross head type screwdriver.
Step 5
Sit the head of the table on the post-top ensuring it is central.
Place 2x bolts through the holes in the table tray and through the holes in
the post-top. Once through, place a washer and wingnut onto each bolt
and tighten securely.
You have now completed the assembly of your Premium Bird Table.