Joy-it ARD MEGA2560R3 User manual

ARD_MEGA2560R3
(Arduino Mega 2560-compatible
Microcontroller, no original Arduino)
Manual

Dear customer,
thank you for choosing a Joy-IT product.
Our board is a high quality replica and
compatible to the Arduino Mega 2560 but it
is not an original Arduino. The „Mega
Board“ is the right microcontroller board
for those who want to get quickly and easily
into the world of programming.
On the internet, you will find a variety of
tutorials and manuals for this microcontrol-
ler board that will give you an easy intro-
duction to the world of programming.
The ATMega2560 microcontroller oers you
enough performance for your ideas and
projects. It is 10 x 5 cm in size and has more
connections than others with 54 digital in- /
outputs and 16 analog inputs.

Microcontroller ATmega2560
Input Voltage 7 - 12 V
Input Voltage
(max.)
6 - 20 V
Digital IO 54, of that 14 PWM
Analog IO 16
DC current IO 20 mA
DC current 3.3 V 50 mA
Storage 256 KB
(8 KB for Bootlader)
SRAM 8 KB
EEPROM 4 KB
Clock Speed 16 MHz
Dimensions 101,52 x 53,3 mm
1. TECHNICAL SPECIFICATIONS

2. PIN ASSIGNMENT
Voltage
regulator
IOREF
RESET
Power
supply
Analog
Inputs
GND Digital I/O
Pins
Communi-
cation
interfaces
RXO
TXO
PWM-
Inter-
faces
GND
AREF
USB-B
PORT
Voltage
input
16 MHz
Quartz
PIN 13 LED
ICSP f. USB
ATmega16U2

If you start programming the Joy-IT
ARD_Mega2560R3, you have to install a deve-
lopment environment and the drivers for the
associated operating system on your compu-
ter which is going to be used for program-
ming.
The recommended development environ-
ment is the “Arduino IDE“ which is released
by the Arduino manufacturer as an open
source soware. This soware is aimed at
beginners, due to concept and structure. It is
compatible to the Joy-IT ARD_Mega2560R3
and has next to the development environ-
ment also the required drivers which make it
possible to start immediately.
The download for this soware can be found
with the following link:
https://www.arduino.cc/en/Main/Soware
3. SOFTWARE-INSTALLATION

4. SOFTWARE-EINRICHTUNG
Aer installing the soware, the appropriate
microcontroller board must be set up in the
programming environment. To do this, follow the
next two steps.
1. Select under [Tools->Board] „Arduino/Genuino
Mega or Mega 2560“
2. Select under [Tools -> Port] the port, marked
with „(Arduino/Genuino Mega or Mega 2560)“.
4. SOFTWARE SETUP

5. DECLARATION OF CONFORMITY
We the manufacturer,
Simac Electronics GmbH
Pascalstr. 8
D-47506 Neukirchen-Vluyn
declare that the product „ARD_Mega2560R3“
(Microcontroller board for experimental set-ups and
prototypes)
fulfils the essential following guidelines, if used as in-
tended:
2004/ 108/EG (EMV) & 2011/65/EU (Rohs)
The norms stipulated in following have been used to
assess the device:
EN 61326-1: 2006 electrical equipment for measuring,
control and laboratory devices
EMV requirements - Part 1 - General requirements
Date: 14.08.2015
Name: Xu Lu
Position in Business: CEO
Signature:

Our Information and Take-back obliga-
tions according to the Electrical and
Electronic Equipment Act (ElektroG)
Symbol on Electric and Electronic Devic-
es:
This crossed-out dustbin means, that electric and
electronic devices do not belong into household
waste. You have to return the used device to a
registration place. Before handing over, you must
remove the waste (rechargeable) batteries which
are not enclosed by the device.
Return Options:
As end user, you can hand over the used device
(which essentially serves for the same function as
the new one bought with us) free of charge for
disposal at purchase of the new device. Small
devices which do not have outer dimensions
bigger than 25 cm, can be handed over for dispos-
al in normal household quantities independently
of the purchase of a new device.
− Option of return at our company site dur-
ing our opening hours:
Simac Electronics GmbH,
6. FURTHER INFORMATION

7. SUPPORT
We also support you aer purchase, of
course. Should you have any outstanding
questions or problems, please contact us via
e-mail, telephone and ticket-support-system.
E-mail: [e-mail]
Ticket-System: http://support.joy-it.net
Telephone: [phone] – 66 (10 - 17
o'clock)
For further information, please visit our web-
site: www.joy-it.net
Pascalstr. 8, D-47506 Neukirchen-Vluyn
− Option of return nearby:
We will send you a parcel stamp with which you
can send us your old device free of charge. For
using this, please contact us via e-mail at
[e-mail] or via telephone at 02845 93
60 -23.
Information on packaging:
Please pack your old device safe for transport. If
you do not have suitable packaging material or
you do not want to use your own material,
please contact us and we will send you an ap-

www.joy-it.net
Simac Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn
Recommended accessoires: Joy-IT SensorKit
Extensive sensor set with 40 sensors
including analog-digital-converter and voltage
converter
• High-quality, reliable sensors
• Universally applicable
• including detailled description with
Programmimg examples for Arduino and
Raspberry PI