Joy-it ARD_Mega2560R3 User manual

ARD_Mega2560R3
(Arduino Mega 2560 compable microcontroller, no original Arduino)
Manual
www.joy-it.net

Dear customer,
thank you for choosing a Joy-IT product.
Our board is a high quality replica and compable with the
Arduino Mega 2560, but it is not an original Arduino.
The „Mega Board“ is the right microcontroller board for those
who want to get into the programming world quickly and easily.
On the internet, you will nd a variety of tutorials and manuals for
the microcontroller board menoned above that will give you an
easy introducon to the world of programming.
The ATMega2560 microcontroller gives you enough power for
your ideas and projects. It is 101.52 mm x 53.3 mm in size and has
many conneons with 54 digital in-/outputs and 16 analog inputs.

Technical specicaons
Model: ARD_Mega2560R3
EAN: 4250236812366
Microcontroller ATmega2560
Input Voltage 7-12V
Input Voltage (max.) 6-20V
Digital IO 54 of which 14 PWM
Analog IO 16
DC current IO 40 mA
DC current 3.3V 50 mA
Storage 256 KB (8 KB for bootloader)
SRAM 8 KB
EEPROM 4 KB
Clock Speed 16 MHz
Dimensions 101.52mm x 53.3mm
Bie besuchen Sie unsere Webseite für aktuelle
Suppornformaonen:
www.joy-it.net

Pinout
IOREF
RESET
Power
supply
Analog
inputs
GND
Digitale I/O
Pins
Communicaon
interfaces
RXO
TXO
PWM
interfaces
GND
AREF
USB-B PORT
Voltage
input
Voltage regulator
16 MHz Quarz
PIN 13 LED
ICSP f. USB
ATmega16U2

Soware-Installaon
If you start programming the Joy– IT
ARD Mega2560 R3, you must install a development
environment on your computer used for programming and
the drivers for the associated operang system.
The development environment is the „Arduino IDE“ release
by the Arduino manufacturer as open source soware. It was
released under the GPLv2 which is directed from the concept
and constucon to beginners.
It is fully compable with the Joy-IT ARD_Mega2560R3 and
includes not only the programming environment but also the
drivers needed to get started straight away.
The download of the soware can be found under the
following link:
hps://www.arduino.cc/en/Main/Soware

Soware Setup
Aer installing the soware, the appropriate microcontroller board
must be set up in the programming environment. To do this follow the
next two steps.
1. Select [Tools->Board] choose „Arduino/Genuino
Mega or Mega2560“.
2. Select [Tools->Port] choose the port marked with
„(Arduino / Genuino Mega or Mega 2560)“.

Declaraon of conformity
Arcle:
ARD_Mega2560R3
Descripon: Microcontroller-Board
Usage: Experimental setups /
Prototypes
The manufacturer
JOY-IT Europe GmbH
Pascalstr. 8
D-47506 Neukirchen-Vluyn
conrms that the product "ARD_Mega2560R3"
when used as intended
certain requirements of the following
Guidelines with:
2004/ 108/EG (EMV) & 2011/65/EU (Rohs)
The standards listed below became the
Assessment of the device applied:
EN 61326-1: 2006 electrical equipment for measuring, control and
laboratory devices - EMV requirements part 1 general requiere-
ment
Date: 14.08.2015
Name: Yue Yang
Posion in business : Manager
Signature:

Recommended accessories: Joy-IT SensorKit X40
Extensive sensor kit with 40 sensors including ana-
log-digital converter and voltage transformer
 High quality, reliable sensors
 Universally applicable
 Including detailed descripon with
programming ecamples for Arduino and
Raspberry PI
www.joy-it.net