Joyolight LC2P-IP55 User manual

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
SPEC 2019-01
LC2P-IP55
Lift up the transparent plastic covers up to 90 degrees.
INSTALLATION GUIDE
STEP 1:
LC2P-IP55
Project
Qty
Date
Client
Rated current 5A
Rated voltage 0-36V
Number of contacts 2
Contact pitch 3.6 mm
Color Black & Transparent
Contact surface Cu
Shell material Polycarbonate
Contact sheet Environmental protection hardware material high
precision copper
Contact sheet surface treatment Environmental protection and anti-corrosion treatment
Working environment -20°C~50°C
Temperature resistance Shell 105°C
Flame retardant rating UL-94-V0
Suitable wire Stranded cable AWG22~AWG18
(0.35 mm²~0.75 mm² )
Suitable wire diameter
(including insulating layer) Φ1.5 mm ~ Φ 2.1mm
Applicable lamp strip specications
“8 mm width, bare board light strip & glue (silicone
material) light strip, monochrome. The number of
lamp beads is 30~120 / m”
Flexible light strip with exible PCB
process
"Electroplating plate (not suitable for hard plate)
Thickness is 0.25mm~0.35mm"
IP Grade “IP55
Can be used for glue strips (silicone technology)”
LC2P-IP55
Connect LED strip and 2-Pin Cable.
WARNING
CAUTION
Failure to comply with the following installation instructions may result in death or serious injury.
• This product must be installed by a professional familiar with the construction and operation of the product and the hazards involved, in
accordance with applicable national and local electrical and construction codes.
• To avoid electrical shock, make sure to disconnect power before install or service.
• Do not use parts that are damaged.
• If received with missing or damaged parts, please contact Joyolight
at 647-496-8107 (CA) or 1-877-849-1942 (US).
• Handle with care throughout the installation in case of damages.
• Unauthorized eld repairs will void warranty.
24mm
12.5mm
8.5mm 8mm

Five-year warranty
Contact us for complete terms
and conditions.
Joyolight reserves the rights change our products and specifications
at anytime without prior notice and such modification shall be effective
immediately. Contact Joyolight for the latest product information.
JOYOLIGHT GROUP INC.
#12, 5200 Dixie road
Mississauga, ON, L4W 1E4
www.joyolight.ca
[email protected]
1-877-849-1942 (US)
647-496-8107 (CA)
SPEC 2019-01
LC2P-IP55
Use pliers to press the cover down
tightly until you hear a “click”.
Installation completed.
STEP 3:
STEP 4:
STEP 5:
Insert the conductive wire into slot, NO NEED TO PEEL THE JACKET.
Make sure to match the polarity of LED tape. (+ to +; - to -)
Insert the LED tape into slot, LED facing up.
Make sure to match the polarity of LED tape to the wire. (+ to +; - to -)
Cut the conductive wire to length you need.
Cut the LED tape to length you need from standard cutting segments; peel off the 3M lm.
STEP 2:
C2P-20
IP55 exible LED tape
AWG#20 stranded wire. DO
NOT REPLACE WITH ANY
OTHER SOLID WIRE.