Julian Bowen Limited PLU001 User manual

Version 170905
White Midsleeper
Assembly Instructions
PLU001
IMPORTANT - READ CAREFULLY - RETAIN
FOR FUTURE REFERENCE

02
CUSTOMER SERVICE
(01623 727374)

03
HARDWARE
PARTS
30x 32x 30x 36X 4x
4x 1x
H
1
1
2
2
3
3
4
4
5
5
6
7
8
9
10
11
11
12
12
13
14
15
15
15
16
8x
12x
2x
16x
16x
4x
1x
1x
IJ
AB C D E FG
KLM
NO
2x
P
15x
8x
Q
8x
R

Distributed by : Julian Bowen Limited
Ben?nck House,
Park Lane Business Park,
Kirkby-in-Ashfield,
No?s, NG17 9LE
WARNING: This upper bed is not suitable for children under six years
CERTIFICATION LABEL
This bunk bed model has been tested
by an independent laboratory and is in
compliance with BS EN 747-1:2012 +
A1:2015 - Standard Consumer Safety
Specifica?on For Bunk Beds & High
Beds
Date of Manufacture: January 2016
Factory ID: Manufactured in Brazil
BARCELONA BUNK BED
Product Code: BAR008
04
Maximum height
of mattress
Distributed by : Julian Bowen Limited
Bentenck House,
Park Lane Business Park,
Kirkby-in-Ashfield,
Nos, NG17 9LE
WARNING: This upper bed is not suitable for children under six years
CERTIFICATION LABEL
This bunk bed model has been tested
by an independent laboratory and is in
compliance with BS EN 747-1:2012 +
A1:2015 - Standard Consumer Safety
Specificaon For Bunk Beds & High
Beds
Date of Manufacture: September 2016
Factory ID: Manufactured in Brazil
PLUTO MIDSLEEPER
Product Code:
IMPORTANT INFORMATION FOR USE AS A MIDSLEEPER
WARNING-High Beds and the upper bed of bunk beds are not suitable for children
under six years due to the risk of injury from falls.
WARNING-Bunk beds and high beds can present a serious risk of injury from
strangulation if not used correctly. Never attach or hang items to any part of the bunk bed
that are not designed to be used with the bed, for example, but not limited to ropes,
strings, cords, hooks, belts and bags.
WARNING-Children can become trapped between the bed and the wall, a roof pitch, the
ceiling, adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of
serious injury the distance between the top safety barrier and the adjoining structure
shall not exceed 75mm or shall be more than 230mm.
WARNING-Do not use the bunk bed/high bed if any structural part is broken or missing.
It is recommended that you always follow the manufacturer’s instructions to assemble
the product.
Always follow the manufacturer’s recommended mattress size, as per these instructions
and the bunk bed / high bed maximum mattress height marking on the item (160mm).
This bed may not be dismantled for storage or transportation.
It is necessary to frequently ventilate the room in order to keep the humidity low and to
prevent mold in and around the bed.
Please periodically check all the fixings of the item and re tighten when necessary
This item conforms to European Safety Standards - BS EN 747: 2012+ A1:2015.
PLU001C/ PLU101C

OPTIONS
06
STARTS ON PAGE 18

05
119.0cm
195.6cm
100.7cm
Please take the time to carefully read through the whole of these instructions before you
commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away from the work area.
It would be sensible to lay a sheet or blanket on the oor where you intend to work to
avoid scratching this product and to protect your oor.
This product is heavy. Take extreme care when lifting to avoid personal injury or
damage to the product.
Assemble the product as close to it’s intended final position in the room as possible.
Please check the contents of boxes before attempting to assemble this product. A full
checklist of parts and fittings is given in page 3 of this instruction leaet.
HANDY HINT: If you keep the hardware in a bowl during assembly you will be less
likely to lose them.
100.7cm
195.6cm
59.5cm

07
1
2x
M
M
O
O
4X
4
5
2x
Q
Q
Q
Q
Q
8X
M
O
1º
2º

2x
2x
1
2
3
C
C
C
C
C
C
8x
E
E
E
E
E
2
3
08

67
1
4
5
F
67
FF
F
F
F
2x
2x
1
09

1º
2º
3º
H
H
J
7
9
6
7
b
b
b
b
b
b
b
b
b
b
b
b
b
b
E
I
I
I
J
I
I
I
I
E
E
E
E
E
E
E
E
E
E
E
E
12x
4x
E
12x
6
1
1
10
4x

8
9
12
E
8x
11
2x
a
a
a
E
E
E
E
K
N
O
N
N
O
O
O
ON
N
aa
aa
aa
a
a
Q
2x
12
11
5
4
N
O
Q
1º
3º
2º

a
4x
a
a
a
a
a
a
aO
O
O
O
O
4
4
2
2
3
3
5
5
n
n
n
n
n
n
n
n
n
n
n
n
Partially tighten Part N
k
8x

K
13
11
Fully tighten Part N

12
13
2x
b
bb
10
1
2x
E
E
E
E
14
b

14
15
6x
G
G
G
G
G
G
G
K
b
b
8
14
13
15
15
15
15
4x
b
b
b
b
b
b
b
b
b
bb
b
b
bb

6
16
17
2x
b
b
2x 1x
b
b
g
g
K
_
13
14
10
16
e
e
e
e

18
K
g
1x
4x
g
8
8
14
1
2x
h
h
L
19
17
1x
e
e
e
e
e
e
hh
L

D
2x
D
D
91,5 cm 91,5 cm
16
Attach the centre slat first by pushing the side
rails together so that the slat is ush against the
side rail, before inserting the screws.
P
D
28x D
16 14x
Next attach the remaining slats.
Place the slats onto the side rail supports and
distribute evenly by using the spacer provided.
20
18

WARNING: This bed is not suitable for children under 4 years.
WARNING: Do not place this child’s bed near heat sources, windows and
other furniture.
WARNING: Do not use this child’s bed if any part is broken, torn or missing.
It is recommended that you always follow the manufacturer’s instructions to
assemble this product.
This product is intended for use by children over 4 years of age.
Children are likely to play, bounce, jump and climb on beds, therefore the
child’s bed shoult not be placed too close to other furniture or windows,
blind cords, curtain pulls or other strings or cords and should be placed
either tight to the wall or have a gap of 300mm between the wall and side of
bed.
This bed may not be dismantled for storage or transportation. Replacement
parts can be obtained from Julian Bowen Limited where available and at
additional cost.
Recommended Mattress Size: 90cm x 190 cm (UK Single) with a depth of no
more than 23 cm.
It is necessary to frequently ventilate the room in order to keep the humidity
low and to prevent mould in and around the bed.
Please periodically check all the fixings of the itemand re-tighten when nacessary.
This item conforms to British Safety Standasds - BS8509:2008 + A1:2011
IMPORTANT INFORMATION FOR USE AS A SINGLE BED

2x
2x
1
2
3
C
C
C
C
C
C
E
E
E
E
1
8x
E
2
21