Juniper EX9208 Installation instructions

EX9208 Switch Hardware Guide
Modified: 2017-01-04
Copyright © 2017, Juniper Networks, Inc.

Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Copyright © 2016, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
EX9208 Switch Hardware Guide
Copyright © 2016, Juniper Networks, Inc.
All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions of
that EULA.
Copyright © 2017, Juniper Networks, Inc.ii

Table of Contents
AbouttheDocumentation............................................xix
DocumentationandReleaseNotes.................................xix
SupportedPlatforms............................................xix
DocumentationConventions......................................xix
DocumentationFeedback........................................xxi
RequestingTechnicalSupport....................................xxii
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . xxii
OpeningaCasewithJTAC....................................xxii
Part 1 Overview
Chapter1 Switch Overview ...................................................3
EX9208SwitchHardwareOverview.....................................3
Software .......................................................3
ChassisPhysicalSpecifications.....................................3
HostSubsystem.................................................5
LineCards......................................................5
CoolingSystem..................................................6
PowerSupplies..................................................6
EX9208SwitchConfigurations.........................................7
EX9208 Switch Hardware and CLI Terminology Mapping . . . . . . . . . . . . . . . . . . . . 9
Chapter 2 Chassis Components and Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Chassis Physical Specifications of an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . 13
Field-Replaceable Units in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Understanding EX9208 Switch Component and Functionality Redundancy . . . . 18
CraftInterfaceinanEX9200Switch....................................19
HostSubsystemLEDs............................................21
FanLEDs......................................................22
PowerSupply(PEM)LEDs........................................22
Switch Fabric LEDs and Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LineCardLEDsandControlButtons................................23
Alarm LEDs and Alarm Cutoff Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
AlarmRelayContacts............................................24
MidplaneinanEX9200Switch........................................25
Routing Engine Module in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Switch Fabric Module in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
HostSubsysteminanEX9200Switch..................................32
Network Port LEDs on Line Cards in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . 33
Modular Interface Card LED in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . 34
Routing Engine Module LEDs in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . 35
iiiCopyright © 2017, Juniper Networks, Inc.

Switch Fabric Module LEDs in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cable Management Brackets in an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . 36
Chapter3 CoolingSystemandAirflow........................................39
Cooling System and Airflow in an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . . 39
FanTray.......................................................39
Airflow Direction in the EX9208 Switch Chassis . . . . . . . . . . . . . . . . . . . . . . . 40
Chapter4 PowerSupplies...................................................43
ACPowerSupplyinanEX9208Switch.................................43
ACPowerSupplyDescription......................................43
ACPowerSupplyConfigurations...................................44
AC Power Supply LEDs in an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DCPowerSupplyinanEX9208Switch.................................46
DCPowerSupplyDescription......................................47
DCPowerSupplyConfigurations...................................47
DC Power Supply LEDs in an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Chapter5 LineCards........................................................51
Line Card Model and Version Compatibility in an EX9200 Switch . . . . . . . . . . . . . 51
EX9200-2C-8XSLineCard...........................................53
LineCardModels...............................................54
LineCardComponents...........................................54
EX9200-4QSLineCard..............................................55
LineCardModels...............................................55
LineCardComponents...........................................56
EX9200-6QSLineCard..............................................56
LineCardModels................................................57
LineCardComponents...........................................58
EX9200-MPCLineCard.............................................58
LineCardModels...............................................59
LineCardComponents..........................................60
EX9200-12QSLineCard.............................................62
LineCardModels...............................................62
LineCardComponents...........................................63
EX9200-32XSLineCard.............................................64
LineCardModels...............................................64
LineCardComponents...........................................65
EX9200-40TLineCard..............................................65
LineCardModels...............................................66
LineCardComponents...........................................66
EX9200-40FLineCard..............................................67
LineCardModels................................................67
LineCardComponents...........................................68
EX9200-40F-MLineCard............................................68
LineCardModels...............................................68
LineCardComponents...........................................69
EX9200-40XSLineCard.............................................70
LineCardModels...............................................70
LineCardComponents...........................................71
Copyright © 2017, Juniper Networks, Inc.iv
EX9208 Switch Hardware Guide

LineCardLEDinanEX9200Switch.....................................71
Configuring Rate Selectability on an EX9200-12QS Line Card to Enable Different
PortSpeeds....................................................72
Configuring Rate Selectability at the PIC Level . . . . . . . . . . . . . . . . . . . . . . . . 72
Configuring Rate Selectability at the Port Level . . . . . . . . . . . . . . . . . . . . . . . . 74
Part 2 Site Planning, Preparation, and Specifications
Chapter6 PreparationOverview..............................................79
Site Preparation Checklist for an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . . 79
Environmental Requirements and Specifications for EX Series Switches . . . . . . . 81
GeneralSiteGuidelines..............................................85
SiteElectricalWiringGuidelines.......................................86
RackRequirements.................................................87
CabinetRequirements...............................................87
Clearance Requirements for Airflow and Hardware Maintenance for an EX9208
Switch........................................................88
Chapter7 PlanningPowerRequirements......................................91
Power Requirements for EX9200 Switch Components . . . . . . . . . . . . . . . . . . . . . 91
AC Power Supply Specifications for EX9208 Switches . . . . . . . . . . . . . . . . . . . . . 92
AC Power Cord Specifications for an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . 93
DC Power Supply Specifications for EX9208 Switches . . . . . . . . . . . . . . . . . . . . . 96
Grounding Cable and Lug Specifications for EX9200 Switches . . . . . . . . . . . . . . 97
Grounding Points Specifications for an EX9200 Switch . . . . . . . . . . . . . . . . . 97
Grounding Cable Lug Specifications for an EX9200 Switch . . . . . . . . . . . . . 98
Grounding Cable Specifications for an EX9200 Switch . . . . . . . . . . . . . . . . . 98
Calculating the EX Series Switch Fiber-Optic Cable Power Budget . . . . . . . . . . . 99
Calculating the EX Series Switch Fiber-Optic Cable Power Margin . . . . . . . . . . . 100
Chapter 8 Transceiver and Cable Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Pluggable Transceivers Supported on EX9200 Switches . . . . . . . . . . . . . . . . . . . 103
Pluggable Transceivers Supported on EX Series Switches . . . . . . . . . . . . . . . . . . 132
SFP+ Direct Attach Copper Cables for EX Series Switches . . . . . . . . . . . . . . . . . . 133
CableSpecifications............................................133
Standards Supported by These Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
QSFP+ Direct Attach Copper Cables for EX Series Switches . . . . . . . . . . . . . . . . 138
CableSpecifications............................................138
ManagementCableSpecifications....................................144
Understanding EX Series Switches Fiber-Optic Cable Signal Loss, Attenuation,
andDispersion.................................................144
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable . . . . . . . . . . . 144
Attenuation and Dispersion in Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . 145
Chapter9 Pinout Specifications.............................................147
Console Port Connector Pinout Information for an EX Series Switch . . . . . . . . . . 147
USB Port Specifications for an EX Series Switch . . . . . . . . . . . . . . . . . . . . . . . . . 148
RJ-45 Management Port Connector Pinout Information . . . . . . . . . . . . . . . . . . . 149
RJ-45 to DB-9 Serial Port Adapter Pinout Information for a Switch . . . . . . . . . . 150
vCopyright © 2017, Juniper Networks, Inc.
Table of Contents

Part 3 Initial Installation and Configuration
Chapter10 UnpackingtheSwitch.............................................155
UnpackingtheEX9200Switch.......................................155
Unpacking a Line Card Used in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . 156
Parts Inventory (Packing List) for an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . 157
Registering Products—Mandatory for Validating SLAs . . . . . . . . . . . . . . . . . . . . . 159
Chapter11 InstallingtheSwitch..............................................161
Installing and Connecting an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Installing a Mounting Shelf in a Rack or Cabinet for an EX9208 Switch . . . . . . . 162
Moving the Mounting Brackets for Center-Mounting an EX9200 Switch . . . . . . 164
Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift . . . . 165
Mounting an EX9208 Switch on a Rack or Cabinet Without Using a Mechanical
Lift ..........................................................168
Installing and Removing EX9208 Switch Hardware Components . . . . . . . . . . . . 170
Chapter 12 Connecting the Switch to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Connecting Earth Ground to an EX Series Switch . . . . . . . . . . . . . . . . . . . . . . . . . 173
Parts and Tools Required for Connecting an EX Series Switch to Earth
Ground ...................................................174
Special Instructions to Follow Before Connecting Earth Ground to a
Switch ....................................................177
Connecting Earth Ground to an EX Series Switch . . . . . . . . . . . . . . . . . . . . . 178
Connecting AC Power to an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Powering On an AC-Powered EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Connecting DC Power to an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Powering On a DC-Powered EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Chapter 13 Connecting the Switch to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Connecting an EX9200 Switch to a Network for Out-of-Band Management . . . 191
Connecting an EX9200 Switch to a Management Console or an Auxiliary
Device........................................................192
Connecting the EX9200 Switch to an External Alarm-Reporting Device . . . . . . 193
Connecting the Alarm Relay Wires to the Craft Interface in an EX9200
Switch .......................................................194
Connecting a Fiber-Optic Cable to a Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Chapter 14 Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
EX9200 Switch Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Connecting and Configuring an EX9200 Switch (CLI Procedure) . . . . . . . . . . . . 198
Part 4 Installing, Maintaining, and Replacing Components
Chapter15 RemovingtheSwitch.............................................205
PoweringOffanEX9200Switch.....................................205
Removing an EX9200 Switch from a Rack or Cabinet Using a Mechanical Lift . . 206
Removing an EX9208 Switch from a Rack or Cabinet Without Using a Mechanical
Lift ..........................................................207
Copyright © 2017, Juniper Networks, Inc.vi
EX9208 Switch Hardware Guide

Chapter 16 Replacing Cooling System Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Installing a Fan Tray in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Removing a Fan Tray from an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Chapter17 ReplacingPowerSupply...........................................215
Installing an AC Power Supply in an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . 215
Removing an AC Power Supply from an EX9208 Switch . . . . . . . . . . . . . . . . . . . 217
Installing a DC Power Supply in an EX9208 Switch . . . . . . . . . . . . . . . . . . . . . . . 218
Removing a DC Power Supply from an EX9208 Switch . . . . . . . . . . . . . . . . . . . . 220
Chapter 18 Replacing Routing Engine (RE) Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Installing an RE Module in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Removing an RE Module from an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . 225
Taking the Host Subsystem Offline in an EX9200 Switch . . . . . . . . . . . . . . . . . . 226
Chapter 19 Upgrading and Replacing Switch Fabric (SF) Module . . . . . . . . . . . . . . . . . 229
Upgrading an EX9200-SF to an EX9200-SF2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Preparing the EX9200 Switch for an EX9200-SF2 Upgrade . . . . . . . . . . . . 229
PoweringOfftheSwitch.........................................230
Removing a Routing Engine from an EX9200-SF Module . . . . . . . . . . . . . . 230
Replacing the EX9200-SF with the EX9200-SF2 . . . . . . . . . . . . . . . . . . . . 230
Installing a Routing Engine into an EX9200-SF2 . . . . . . . . . . . . . . . . . . . . . 230
PoweringOntheSwitch.........................................231
Completing the EX9200-SF2 Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Installing an SF Module in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Removing an SF Module from an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . 235
Chapter 20 Maintaining and Replacing Line Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Handling and Storing Line Cards in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . 237
HoldingaLineCard.............................................238
StoringaLineCard.............................................240
Maintaining Line Card Cables in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . . . 240
Unpacking a Line Card Used in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . 241
Installing a Line Card in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Removing a Line Card from an EX9200 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Chapter 21 Replacing a MIC in an EX9200-MPC Line Card . . . . . . . . . . . . . . . . . . . . . . . 247
Installing a MIC in an EX9200-MPC Line Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Removing a MIC from an EX9200-MPC Line Card . . . . . . . . . . . . . . . . . . . . . . . . 251
Chapter22 Replacing Transceiver ............................................255
InstallingaTransceiverinaSwitch....................................255
Removing a Transceiver from a Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Chapter23 ReplacingAlarmRelayWire.......................................261
Connecting the Alarm Relay Wires to the Craft Interface in an EX9200
Switch .......................................................261
Disconnecting the Alarm Relay Wires from the Craft Interface in an EX9200
Switch .......................................................262
viiCopyright © 2017, Juniper Networks, Inc.
Table of Contents

Chapter 24 Maintaining and Replacing Fiber-Optic Cable . . . . . . . . . . . . . . . . . . . . . . . 263
Connecting a Fiber-Optic Cable to a Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Disconnecting a Fiber-Optic Cable from a Switch . . . . . . . . . . . . . . . . . . . . . . . . 264
Maintaining Fiber-Optic Cables in Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Chapter 25 Replacing Cable Management Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
Installing Cable Management Brackets on an EX9208 Switch . . . . . . . . . . . . . . 267
Removing Cable Management Brackets from an EX9208 Switch . . . . . . . . . . . 268
Chapter26 Routine Maintenance ............................................269
Routine Maintenance Procedures for EX9200 Switches . . . . . . . . . . . . . . . . . . . 269
Handling and Storing Line Cards in EX9200 Switches . . . . . . . . . . . . . . . . . . . . 269
HoldingaLineCard.............................................270
StoringaLineCard.............................................272
Maintaining Line Card Cables in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . . . 273
Maintaining Power Supplies in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . . . . 273
Maintaining the Air Filter in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Maintaining Host Subsystem in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . . . . 275
Maintaining the Fan Tray in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Chapter 27 Contacting Customer Support and Returning the Chassis or
Components.....................................................281
Returning an EX9200 Switch or Component for Repair or Replacement . . . . . . 281
Locating the Serial Number on an EX9208 Switch or Component . . . . . . . . . . . 282
Listing the Switch and Components Details with the CLI . . . . . . . . . . . . . . . 282
Locating the Serial Number ID Label on an EX9200 Switch Chassis . . . . . . 284
Locating Serial Number ID Labels on FRU Components . . . . . . . . . . . . . . . 285
Contacting Customer Support to Obtain Return Material Authorization for
Switches .....................................................288
Packing an EX9200 Switch or Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
PackinganEX9200Switch......................................290
Packing EX9200 Switch Components for Shipping . . . . . . . . . . . . . . . . . . . . 291
Part 5 Troubleshooting
Chapter28 Troubleshooting Procedures ......................................295
Troubleshooting the Cooling System in an EX9200 Switch . . . . . . . . . . . . . . . . 295
Troubleshooting Power Supplies in an EX9200 Switch . . . . . . . . . . . . . . . . . . . . 296
Troubleshooting Line Cards in EX9200 Switches . . . . . . . . . . . . . . . . . . . . . . . . . 297
Troubleshooting Traffic Drops on EX9200-6QS Line Cards . . . . . . . . . . . . . . . . 299
Chapter 29 Alarms and System Log Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Understanding Alarm Types and Severity Levels on EX Series Switches . . . . . . . 301
Chassis Component Alarm Conditions on EX9200 Switches . . . . . . . . . . . . . . . 302
BackupRoutingEngineAlarms...................................308
MonitoringSystemLogMessages.....................................310
Copyright © 2017, Juniper Networks, Inc.viii
EX9208 Switch Hardware Guide

Part 6 Safety and Compliance Information
Chapter 30 General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Definitions of Safety Warning Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
QualifiedPersonnelWarning.........................................320
Warning Statement for Norway and Sweden . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
Chapter31 FireSafetyRequirements.........................................323
FireSafetyRequirements............................................323
Chapter 32 Installation Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . 325
InstallationInstructionsWarning......................................325
ChassisLiftingGuidelines...........................................327
RestrictedAccessWarning..........................................328
RampWarning....................................................329
Rack-Mounting and Cabinet-Mounting Warnings . . . . . . . . . . . . . . . . . . . . . . . . 330
GroundedEquipmentWarning.......................................335
Chapter 33 Radiation and Laser Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . 337
Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Laser and LED Safety Guidelines and Warnings for Switches . . . . . . . . . . . . . . . 338
GeneralLaserSafetyGuidelines..................................338
Class1LaserProductWarning....................................339
Class1LEDProductWarning.....................................339
LaserBeamWarning...........................................340
Chapter 34 Maintenance and Operational Safety Warnings . . . . . . . . . . . . . . . . . . . . . . 343
Maintenance and Operational Safety Guidelines and Warnings . . . . . . . . . . . . . 343
BatteryHandlingWarning.......................................343
JewelryRemovalWarning.......................................344
LightningActivityWarning.......................................346
OperatingTemperatureWarning..................................346
ProductDisposalWarning.......................................347
Chapter 35 Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 349
General Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . 349
Action to Take After an Electrical Accident . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Prevention of Electrostatic Discharge Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . 351
AC Power Electrical Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
ACPowerDisconnectionWarning.....................................355
DC Power Electrical Safety Guidelines for Switches . . . . . . . . . . . . . . . . . . . . . . 356
DCPowerDisconnectionWarning.....................................359
DC Power Grounding Requirements and Warning . . . . . . . . . . . . . . . . . . . . . . . . 360
DCPowerWiringSequenceWarning...................................361
DC Power Wiring Terminations Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
Multiple Power Supplies Disconnection Warning . . . . . . . . . . . . . . . . . . . . . . . . . 365
TNPowerWarning.................................................365
ixCopyright © 2017, Juniper Networks, Inc.
Table of Contents

Chapter 36 Agency Approvals and Compliance Statements . . . . . . . . . . . . . . . . . . . . . 367
Agency Approvals for EX Series Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
Battery Compliance Statement for Environmental Requirements for EX Series
Switches .....................................................368
Compliance Statements for EMC Requirements for EX Series Switches . . . . . . 368
Canada ......................................................369
European Community ..........................................369
Israel ........................................................369
Japan........................................................370
Korea ........................................................370
United States .................................................370
FCCPart15Statement..........................................370
Nonregulatory Environmental Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371
Compliance Statements for Acoustic Noise for EX Series Switches . . . . . . . . . . 372
Copyright © 2017, Juniper Networks, Inc.x
EX9208 Switch Hardware Guide