Jura IMPRESSA XF50 Classic User manual

IMPRESSA X F 50
Short operating instructions

Control elements
10
9
2
1
21
11 22
13
12
13
14
15/16
17
18
19
20
33 45678
Rotary Switch

Control elements
1. Rotary Switch
2. Illuminated ring
3. ON/OFF key
4. Programming key
5. Draw-off key 1 cup
6. Draw-off key 2 cups
7. Maintenance key
8. Steam pre-selection key
9. Display dialog system
10. Water tank with carrying handle
11. Filler funnel for pre-ground coffee
12. Bean tank cover
13. Aroma preservation cover
14. Steam/hot water draw-off valve
15. Replaceable Easy-Auto-Cappuccino Frother mounted in illustration
16. Replaceable hot water nozzle
17. Height-adjustable coffee spout
18. Coffee grounds container
19. Drip grate
20. Drip tray
21. Power Switch
22. Metal shelf

First use
Press power switch (I) (on rear)
Fill bean tank
Press ON / OFF key
Display text: SPRACHE - DEUTSCH
Turn the Rotary Switch until the required language is displayed
Confirm selected language by pressing the Rotary Switch
Lift out water tank
Fill water tank and place back into the machine
Display text: OPEN TAP
Place receptacle under hot water nozzle
Turn tap to position
Turn it back to the initial position when display prompts you
to do so
Display text: PRESS - MAINT.
Place receptacle under height-adjustable coffee spout
Press maintenance key when display prompts you to do so
The machine is ready for use

Insert filter (first use)
Remove water tank and empty it
Flip up cartridge (1) holder
Insert filter cartridge (2) into water tank, applying slight pressure
Close cartridge holder (1) (engages audibly)
Fill water tank and insert
Hold programming key P down until the display shows FILTER
Confirm setting by pressing the Rotary Switch
Turn Rotary Switch until the display shows YES
Confirm setting by pressing the Rotary Switch
Place a receptacle (ca. 1 litre) under the hot water nozzle
Turn tap to position
Turn it back to the initial position when display prompts you
to do so
The machine is ready for use
(1)
(2)

Cleaning (duration: approx. 15 minutes)
Display text: READY - CLEAN
Press maintenance key down until the display shows EMPTY
- TRAY
Empty drip and grounds tray and place back into the machine
Place a receptacle (ca. 1 litre) under the the coffee spout
Press maintenance key
Drop a original JURA cleaning tablet into the filler funnel for ground
coffee when display prompts you to do so
Close lid
Press maintenance key
Empty drip and grounds tray and place back into machine
when display prompts you to do so
Wipe out filler funnel for ground coffee with a dry cloth after
the cleaning program has finished.
The machine is ready for use

Changing the filter
Display text: READY - FILTER
NOTE:
After having used 50 litres of water or after two months at the latest,
the filter cartridge will be used up.
Switch machine off using the ON / OFF key
Press maintenance key until the display shows:
CHG FILTER — OPEN TAP
Remove and empty water tank
Flip up cartridge holder (1)
Remove old CLARIS plus filter cartridge from the tank
Place new filter cartridge (2) into water tank, applying slight pressure
Close cartridge holder (1) (engages audibly)
Fill water tank and place back into machine
Place a receptacle (ca. 1 litre) under the hot water nozzle
Turn tap to position
Turn it back to the initial position when display prompts you
to do so
The machine is ready for use
(1)
(2)

Display text: READY - CALCIFIED
Switch machine off using the ON / OFF key
Hold maintenance key down until the display shows
EMPTY — TRAY
Empty drip and grounds tray and place back into machine
Remove Easy-Auto-Cappuccino Frother or hot water nozzle
Remove water tank and empty it
Completely dissolve contents of a blister (3 tablets) in 0.6 litres of
water
Pour solution into the empty water tank
Place water tank back into machine
Place a receptacle (ca. 1 litre) under the spout
Turn tap to position
Turn it back to the initial position when display prompts you to do so
Decalcifying (duration: approx. 40 minutes)

Empty drip and grounds tray and place back into machine
when display prompts you to do so
Rinse water tank well, fill with cold, fresh tap water and place it back
into the machine
Place receptacle under spout
Turn tap to position
Turn it back to the initial position when display prompts you to do so
Empty drip and grounds tray and place back into machine
when display prompts you to do so
Fit Easy-Auto-Cappuccino Frother or hot water nozzle
Shift receptacle under height-adjustable coffee spout
Press maintenance key
The machine is ready for use
Decalcifying (continuation)

Rinsing the Easy-Auto-Cappuccino Frother
To ensure perfect function, the Easy-Auto-Cappuccino Frother should
be rinsed regularly.
Dismantle the Easy-Auto-Cappuccino Frother into its individual
parts
Thoroughly rinse all parts of the nozzle under running water
Reassemble the Easy-Auto-Cappuccino Frother
Cleaning the Easy-Auto-Cappuccino Frother
To ensure perfect function, the Easy-Auto-Cappuccino Frother should
be cleaned regularly
Place a receptacle under the Easy-Auto-Cappuccino Frother
Fill a second receptacle with 2.5 dl of fresh water and add a
capful of Auto-Cappuccino Cleaner
Dip the milk pipe into the second receptacle with
the Auto-Cappuccino Cleaner
Draw steam until the receptacle with the Auto-Cappuccino
Cleaner is empty
Fill the receptacle with 2.5 dl of fresh water
Dip the milk pipe into the receptacle with the fresh water
Draw steam until the receptacle with the fresh water is empty
Cleaning of the Easy-Auto-Cappuccino Frother is complete
The machine is ready for use

Art. 65300 – XF50 GB – 05/2007
www.jura.com