Jura GIGA X9c Professional Configuration guide

My Coffee Shop Pty Ltd
ACN 102 850 037
9 Hall St
Hawthorn Ea t VIC 3123
ph: 03 9946 4160
fax: [phone]
Shop 93,1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365 487 www.mycoffeeshop.com.au
Jura GIGA X9C
Operating & cleaning in truction

4
Control elements
Control elements
5
7
2
3
9
8
11
16
15
14
10
12
13
4
1
6
1 Bean container with aroma preservation
cover
2 Bean container status indicator
3 Water tank cover
4 Water tank
5 Power switch and plug-in mains
cable(back of the machine)
6 Professional steam lance(pivoting)
7 Coffee grounds container
8 Drip tray
9 Cup grille
10 Filler funnel for ground coffee
11 Ventilation slats (Venti Ports)
12 Storage compartment cover
13 Measuring spoon for ground coffee
14 Height- and width-adjustable dual spout
15 Splash guard
16 Height-adjustable hot-water spout

5
Control elements




Top of the machine
1 QOn/Off button
2 gRotary Switch
3 OP button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)




Back of the machine
1 Service cover(open by pressing with your
finger)
2 Locking device
3 Sliding catch
4 Service socket (underneath cover)

Cleaning procedures & Products
GIGA (Filtered mains water)
My Coffee Shop Pty Ltd
ACN 10 850 037
9 Hall St
Hawthorn East VIC 31 3
ph: 03 9946 4160
fax: [phone]
Shop 93,1-5 Harwood Street
Pyrmont NSW 009
ph: 0 9034 6580
fax: [phone]
[e-mail] 1300 365 4 7 www.mycoffeeshop.com.au
Daily
See procedure – Daily milk system clean
Must be performed at the end of each day just before the machine is turned off
Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways.
Use Jura cappuccino cleaner – 1 litre bottle (Prod no. 71141)
Weekly
See procedure – Weekly milk system clean
Performed once per week
Purpose: To remove any milk fats to ensure the milk frother works correctly.
Use Jura cappuccino cleaner – See above
When prompted
Clean machine – See procedure (Coffee system clean)
Performed only when prompted (Every 0 coffees)
Purpose: Removes coffee oil from the brewing unit and coffee path to maintain the quality of the coffee.
Use Jura cleaning tablets – 6 pk (Prod no. 71111), 5 pk (Prod no. 7111 ), 100 pk (Prod no. 71113)
Change filter – Contact service agent
Performed only when prompted (Based on the filter size & water hardness)
Purpose: Reduces the formation of lime scale inside the coffee machine maintaining clear pathways,
water temperature and steam pressure.
Use
Medium filter
Prod no. J69535
Large filter
Prod no. J69536
Important: Genuine Jura cleaning and descaling tablets must be used as a condition of warranty and
service programs.

Precondition: »Please select
product:«
1
»Maintenance status (1/5)«
2
3
4
»Cleaning agent for milk
system.«
Clean the
milk system
Start
Start
3
4
5
6
»Milk system is being rinsed.«
»Water for cleaning milk system.«
250 ml
1x 15 ml
Next
8
9
10
»Milk system is being rinsed.«
»Milk system cleaning complete.«
»Please select product:«
c250 ml
Next
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
GIGA X9c Professional
Daily milk system clean
J
These short instructions do not replace
the ‘GIGA X9c Professional Instructions
for Use’. Make sure you read and observe
the safety information and warnings first
in order to avoid hazards.
Equipment required:
JURA Cappuccino Cleaner
1000 ml (Art. 62536)

Daily cleaning procedure – Steam wand
The steam wand must be dismantled and cleaned daily to ensure it operates correctly
1. Remove the steam wand outer section – turn clockwise. (Fig 2)
2. Remove the steam wand inner section – turn clockwise. (Fig ) If they are tight use the tool provided.
. Soak the steam wand in 400ml of warm water and 15ml of milk frother cleaner for 15 min. (Fig 4)
4. Clean the temperature probe. (Fig 5)
5. Remove the steam wand from solution and rinse under tap water. (Fig 6)
6. Clean the steam wand inner & outer sections using the brushes provided. (Fig 7 & 8)
7. Re-assemble the steam wand (turn anti-clockwise), inner section followed by outer section. (Fig 9 & 10)
Please note: If the steam wand is not cleaned daily it will not operate correctly and can be damaged.
Figure 1 Figure 2 Figure 3 Figure 4
Figure 5 Figure 6 Figure 7 Figure 8
Figure 9 Figure 10

Weekly milk system clean
My Coffee Shop Pty Ltd
ACN 102 850 037
9 Hall Street
Hawthorn Ea t Vic 3123
ph: 03 9946 4160
fax: [phone]
93/1-5 Harwood Street
Pyrmont NSW 20009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365
487
www.mycoffeeshop.com.au
Complete thi procedure once a week after the daily milk y tem clean
1. Remove the pla h back. (Fig 1)
2. Remove pout cover. Pre the black relea ing button and lift. (Fig 2 – 3)
3. Pull the milk outlet down (Fig 4) and the milk ho e out. (Fig 5)
4. Remove the auto frother by pulling it toward you. (Fig 6)
5. Separate the auto frother into 6 part . (Fig 7)
6. Soak all 6 part in 250ml of warm (not hot) water & 15ml of milk cleaner for 15 - 20 min (max).
7. Remove the part from olution and rin e under cold tap water.
8. Check that water flow through the milk outlet freely. (Fig 8)
9. Re-a emble the auto frother en uring the arrow tip line up. (Fig 9)
10. Refit the auto frother, pout cover and pla h back.
Plea e note: The pla h back protect the pout lide behind it from milk platter and mu t be fitted.
igure 1 igure 2 igure 3 igure 4 igure 5
igure 6 igure 7 igure 8 igure 9

Precondition: »Clean machine.«
(or: »Please select product:«)
1
»Maintenance status (1/5)«
2
3
4
»Empty coffee grounds
container.«
Clean
Start
Start
5
6
7
8
»Press the Rotary Switch.«
9
10
»Machine is being cleaned.«
»Add cleaning tablet.«
11
12
13
»Press the Rotary Switch.«
14
»Machine is being cleaned.«
»Empty coffee grounds contai-
ner.«
15
16
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
GIGA X9c Professional
Coffee system clean
Approximate duration 20 min.
J
These short instructions do not replace
the ‘GIGA X9c Professional Instructions
for Use’. Make sure you read and observe
the safety information and warnings first
in order to avoid hazards.
Equipment required:
2-phase cleaning tablets
Tub of 25 (Art. 62535)
Pack of 6(Art. 62715)

17
»Clean« /»Cleaning complete.«
»Please select product:«

GIGA X9c Professional
Precondition: »Decalcify machine.«
(or »Please select product:«)
1
»Maintenance status (1/5)«
2
3
4
»Empty drip tray.«
Descale
Start
Start
5
6
7
8
»Pour descaling agent into water
tank.«
9
10
11
»Press the Rotary Switch.«
12
4x
800 ml
13
»Machine is being descaled.«
»Empty drip tray.«
14
15
16
»Fill water tank.«
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
Descaling the machine
Approximate duration 50 min.
J
These short instructions do not replace
the ‘GIGA X9c Professional Instructions
for Use’. Make sure you read and observe
the safety information and warnings first
in order to avoid hazards.
Equipment required:
Descaling tablets
Tub of 36 (Art. 70751)
Pack of 3 (Art. 61848)

17
18
»Press the Rotary Switch.«
19
20
»Machine is being descaled.«
»Empty drip tray.«
c
21
22
23
»Descale« /»Descaling complete.«
»Please select product:«

Troubleshooting:
Milk flow
 No milk Spluttering milk Not filling cups Froth milk is flat
Solution:
1. Remove the splash back screen. (Fig 1)
2. Press the black releasing buttons on the sides of the spout cover and lift the cover off. (Fig 2 – 3)
3. f the flat milk is flowing normally and the problem is with the froth milk only, replace the air suction (Fig 4),
refit the cover and test the milk again. f the problem has been solved, purchase spare air suction (Part no.
70008). f the problem has not been solved go to step 4.
4. Remove the auto frother by pulling the milk outlet down (Fig 5) and pulling the milk hose connector out (Fig
6). Now you will be able to remove the auto frother by pulling it towards you (Fig 7).
5. Separate the auto frother into 6 parts (Fig 8), soak in 250ml of warm water & 15ml of milk cleaner for 20 min.
6. Remove the parts from the solution and rinse under tap water.
7. Clean the milk, air and steam paths using the cleaning brushes. See 2 x milk path holes in Fig 11.(Fig 9 – 13)
8. Pour tap water into the top of the milk outlet (Fig 14). f water does not pour from the two outlets as shown,
replace it with your spare outlet and order in another spare. (Part no. 70007)
9. Re-assemble the auto frother ensuring that the arrow tips line up. (Fig 15)
10. Refit the auto frother, cover, splash back and test milk. f the problem has not been solved ph 1300 365 487.
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5
Figure Figure 7 Figure 8
Figure 9 (Milk path) Figure 10 (Milk path)
Figure 11 (Milk path)
Figure 12 (Air path)
Figure 13 (Steam path)
Figure 14 (Test outlet)
Figure 15