Jura E8 User manual

E8/E80 Instructions for Use

2
Table of contents
Your E8/E80
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
Determining the water hardness ..............................................................................................................10
First-time use .................................................................................................................................................11
Connecting milk...........................................................................................................................................14
2 Preparation 15
Latte macchiato, cappuccino and other speciality coffees with milk.................................................15
Ristretto, espresso and coffee....................................................................................................................16
Two ristretti, two espressi and two coffees .............................................................................................16
Milk foam.......................................................................................................................................................17
Ground coffee...............................................................................................................................................17
Permanently setting the amount of water for the cup size .................................................................18
Adjusting the grinder ..................................................................................................................................19
Hot water.......................................................................................................................................................19
3 Daily operation 20
Filling the water tank..................................................................................................................................20
Switching on the machine.........................................................................................................................20
Daily maintenance......................................................................................................................................20
Regular maintenance ..................................................................................................................................21
Switching off the machine..........................................................................................................................21
4 Permanent settings in programming mode 22
Adjusting the product settings.................................................................................................................22
Automatic switch-off..................................................................................................................................23
Setting the water hardness .......................................................................................................................24
Milk system rinsing.....................................................................................................................................24
Unit for amount of water...........................................................................................................................25
Language......................................................................................................................................................25
5 Maintenance 26
Rinsing the machine...................................................................................................................................26
Rinsing the fine foam frother....................................................................................................................26
Cleaning the fine foam frother.................................................................................................................27
Dismantling and rinsing the professional fine foam frother...............................................................28
Dismantling and rinsing the fine foam frother......................................................................................29
Inserting the filter .......................................................................................................................................29
Changing the filter......................................................................................................................................30
Cleaning the machine .................................................................................................................................31

3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your JURA.
‘Coffee’ Display
Symbol description
Descaling the machine ..............................................................................................................................32
Cleaning the bean container.....................................................................................................................34
Descaling the water tank ...........................................................................................................................34
6 Display messages 35
7 Troubleshooting 36
8 Transport and environmentally friendly disposal 38
Transport/ Emptying the system.............................................................................................................38
Disposal.........................................................................................................................................................38
9 Technical data 39
10 Index 40
11 JURA contact details/ Legal information 44

4
Control elements
Control elements
1
13
12
10
9
11
2
3
4
5
7
6
814
1 Filler funnel cover
2 Filler funnel for ground coffee
3 Bean container with
aroma preservation cover
4 Water tank cover
5 Water tank
6 Mains cable(back of the machine)
7 Coffee grounds container
8 Drip tray
9 Cover cap for grinder adjustment switch
10 Grinder adjustment switch
11 On/Off button Q
12 Connector System©with
professional fine foam frother
13 Height-adjustable coffee spout
14 Cup grille

5
Control elements
1
2
1 Display 2 Multi-function buttons (button function
depends on what is shown in the display)
Fine foam frother (used in different model variants)
Accessories
Container for milk system
cleaning
Measuring spoon for ground
coffee
Hot-water nozzle
6

6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibil-
ity for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty
service is not applicable for damage or defects
caused by non-compliance with the instructions
for use. Keep these instructions for use close to the
machine and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and con-
tact JURA service.
UFor models with a permanently connected
mains cable: If the mains cable of this machine
is damaged, it must be repaired either directly
by JURA or by an authorised JURA service cen-
tre.
UFor models with a disconnectable mains cable:
If the mains cable of this machine is damaged
it must be replaced with a special mains cable,
Proper use
For your safety
J

7
Important information
which is available directly from JURA or from
authorised JURA service centres.
UMake sure that the JURA and the mains cable
are not located close to hot surfaces.
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch
off the JURA using the On/Off button. Only
then should you remove the mains plug from
the power socket.
There is a risk of scalds or burns on the spouts and
fine foam frother:
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
UBe careful to ensure that the fine foam frother
is correctly installed and clean. If incorrectly
fitted or if it becomes blocked, the fine foam
frother or its parts might come off.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.

8
Important information
UProtect the JURA from environmental influ-
ences such as rain, frost and direct sunlight.
UDo not immerse the JURA, mains cable or con-
nections in water.
UDo not put the JURA or any individual parts in
the dishwasher.
UBefore cleaning, switch your JURA off with the
On/Off button. Always wipe the JURA with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
UOnly connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your JURA. Further technical data
is provided in these instructions for use (see
Chapter 9 ‘Technical data’).
UConnect the JURA directly to a domestic power
socket. Using multi-socket adapters or exten-
sion cords may cause overheating.
UPlease only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
JURA.
UDo not use alkaline cleaning agents when
cleaning, use a soft cloth and a mild detergent.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.
UOnly fill the water tank with fresh, cold water.
USwitch the machine off with the On/Off button
if you are going to be absent for a longer
period of time and remove the mains plug
from the power socket.
UChildren may not clean or service the machine
unless supervised by a responsible person.

9
Important information
UDo not allow children to play with the machine.
UKeep children under the age of 8 away from
the machine, or supervise them constantly.
UChildren aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Chil-
dren must be able to recognise and under-
stand the potential dangers arising from incor-
rect use.
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it
correctly.
Safety when handling the CLARIS Smart filter
cartridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct
sunlight.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your JURA
and on every aspect of coffee.
When setting up your JURA, please note the following:
UPlace the JURA on a horizontal surface that is not sensitive to
water.
UChoose a spot for your JURA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur®test strips supplied with the
machine.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
Determining the water
hardness

11
1 Preparing and using for the first time
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
When using the machine for the first time, you can choose whether
you want to operate JURA with or without the CLARIS Smart filter
cartridge. If the water hardness is 10°dH or more, we recommend
using the filter cartridge.
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
TPress the On/Off button Qto switch the JURA on.
‘Sprachauswahl’
ETo display more languages, press the ‘ > ’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TPress the ‘<’ or ‘>’ button to change the water hardness
setting, for example to ‘25°dH’.
TPress the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Use filter’
First-time use
JWARNING

12
1 Preparing and using for the first time
ENow decide whether you want to operate your JURA with or
without a CLARIS Smart filter cartridge.
Operation with filter cartridge: go straight to the next section (see
Chapter 1 ‘Preparing and using for the first time – First-time use with
filter cartridge activation’).
Operation without filter cartridge (see Chapter 1 ‘Preparing and
using for the first time – First-time use without filter cartridge acti-
vation’).
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPlace a receptacle (at least 300 ml) under the fine foam
frother.
TRemove the water tank and rinse it with cold water.
TFit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge.
TInsert the filter cartridge with its extension into the water
tank.
TTurn the filter cartridge clockwise until it audibly clicks into
place.
TFill the water tank with fresh, cold water and reinsert the
tank.
EThe machine automatically detects that you have just inserted
the filter cartridge.
‘Use filter’ / ‘Saved’
‘Filter is being rinsed’, water flows out of the fine foam
frother.
First-time use with filter
cartridge activation
CAUTION
éè

13
1 Preparing and using for the first time
Rinsing of the filter stops automatically after approximately
300ml.
‘System is filling’, the system fills up with water.
‘Empty drip tray’
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
‘Machine is rinsing’, the system is rinsed. Water flows out of
the coffee spout. The rinse stops automatically. Your JURA is
ready for use.
EThe start screen shows the products you can prepare. Press
the ‘>’ button to display more products.
EIf the filter is active, this is indicated by a blue filter symbol at
the bottom of the display.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TPress the ‘No filter’ button.
‘Saved’ appears briefly on the display.
‘Fill water tank’
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
‘System is filling’, the system fills up with water.
‘Machine is heating’
‘Machine is rinsing’, water flows out of the coffee spout. The
rinse stops automatically. Your JURA is ready for use.
First-time use without filter
cartridge activation
CAUTION
éè

14
1 Preparing and using for the first time
EThe start screen shows the products you can prepare. Press
the ‘>’ button to display more products.
Your JURA creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8°C. We would therefore recommend
using a milk cooler or a vacuum milk container.
TRemove the protective cover from the fine foam frother.
TConnect the milk pipe to the fine foam frother.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
Connecting milk
éè
éè

15
2 Preparation
2 Preparation
EThe display shows four products you can prepare. Press the
‘>’ button to display more products.
EYou can stop the machine at any time while a speciality coffee
or hot water is being prepared. Just press any button.
EDuring the grinding operation you can select the coffee
strength of single products by pressing the ‘<’ and ‘>’ but-
tons.
EDuring preparation you can change the preset amounts (e.g.
water and amount of milk) by pressing the ‘<’ and ‘>’ but-
tons.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
Your JURA prepares latte macchiato, cappuccino and flat white at the
touch of a button. There is no need to move the glass or cup.
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:The speciality coffees with milk are displayed. Milk is
connected to the fine foam frother.
TPlace a glass under the fine foam frother.
EIf you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
TPress the ‘Latte macchiato’ button.
‘Latte macchiato’ appears and the preset amount of milk
foam flows into the glass.
Latte macchiato,
cappuccino and other
speciality coffees with
milk
éè

16
2 Preparation
EThere is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Adjusting the product settings’).
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. Your JURA is once more ready for use.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the fine foam frother’).
Example:Proceed as follows to prepare one coffee.
Precondition:The speciality coffees are displayed.
TPlace a cup under the coffee spout.
TPress the ‘Coffee’ button.
Preparation starts. ‘Coffee’ and the coffee strength are dis-
played. The preset amount of water for coffee flows into the
cup.
Preparation stops automatically. Your JURA is once more
ready for use.
To prepare two speciality coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi.
Precondition:The speciality coffees are displayed.
TPlace two cups under the coffee spout.
TPress the ‘Espresso’ button twice (within 1 second) to start
preparation.
‘2 espressi’ appears and the preset amount of water flows
into the cups.
Preparation stops automatically. Your JURA is once more
ready for use.
Ristretto, espresso and
coffee
éè
Two ristretti, two espressi
and two coffees
éè

17
2 Preparation
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare milk foam.
Precondition:The speciality coffees with milk are displayed. Milk is
connected to the fine foam frother.
TPlace a cup under the fine foam frother.
EIf you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
EIf you want to heat the milk turn the setting wheel of the
professional cappuccino frother to the Milk positionè.
TPress the ‘Milk foam’ button.
The milk foam is prepared. The preset amount of milk flows
into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 ‘Maintenance – Cleaning the fine foam frother’).
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the JURA stops the operation.
EThe desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth-
erwise the JURA stops the operation and is once more ready
for use.
All speciality coffees with ground coffee are always prepared follow-
ing the same model.
Milk foam
éè
Ground coffee

18
2 Preparation
Example:Proceed as follows to prepare one espresso using ground
coffee.
Precondition:The speciality coffees are displayed.
TPlace an espresso cup under the coffee spout.
TOpen the powder chute cover.
‘Ground coffee’ / ‘Please add ground coffee’
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
TPress the ‘Espresso’ button.
Preparation starts. ‘Espresso’ appears and the preset amount
of water for espresso flows into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
It is easy to permanently adjust the amount of water for all single
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:The speciality coffees are displayed.
TPlace a cup under the coffee spout.
TPress and hold the ‘Coffee’ button until ‘Enough coffee?
Press button’ appears.
TRelease the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
TPress any button except ‘Cancel’ as soon as there is sufficient
coffee in the cup.
Preparation stops. ‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
Your JURA is once more ready for use.
EYou can alter this setting at any time by repeating the above
procedure.
EYou can also permanently set the amounts for all single prod-
ucts in programming mode (see Chapter 4 ‘Permanent set-
tings in programming mode – Adjusting the product set-
tings’).
Permanently setting the
amount of water for the
cup size
éè

19
2 Preparation
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind dur-
ing the preparation of an espresso.
TPlace a cup under the coffee spout.
TOpen the cover of the grinder adjustment switch.
TPress the ‘Espresso’ button to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TClose the cover of the grinder adjustment switch.
To obtain a perfect water flow, use the hot-water nozzle.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:The speciality coffees are displayed.
TPlace a cup under the hot-water nozzle.
TPress the ‘Hot water’ button.
‘Hot water’, the preset amount of water flows into the cup.
Preparation stops automatically. Your JURA is once more
ready for use.
Adjusting the grinder
CAUTION
Hot water
JCAUTION

20
3 Daily operation
3 Daily operation
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
TPlace a receptacle under the coffee spout.
TPress the On/Off button Qto switch the JURA on.
‘Welcome to JURA’
‘Machine is heating’
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. Your JURA is ready for use.
To ensure that you get many years of reliable service out of your
JURA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the drip tray. Rinse
them both with warm water.
EAlways empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
TRefit the coffee grounds container and the drip tray.
TRinse the water tank with clean water.
Filling the water tank
CAUTION
Switching on the machine
éè
Daily maintenance