Jura IMPRESSA XF50 Classic User manual

IMPRESSA XF50
Type 661
Original instructions for use
K
EBefore using the machine read the instructions for use.

Legend:
䡲DISPLAY: serves as information.
䡲DISPLAY: please follow the instructions shown. = Note / Tip = Important

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10
Fig. 11 Fig. 12
Fig. 17
Fig. 13
Temp. max.
Temp. min.
Fig. 18
Fig. 19
Fig. 20
Fig. 14 Fig. 15 Fig. 16

Control elements
1. Rotary Switch
2. Illuminated ring
3. Maintenance button
4. Preparation button, 1 espresso
5. Preparation button, 2 espressi
6. Preparation button, 1 coffee
7. Preparation button, 2 coffees
8. Steam preselection button
9. Display dialogue system
10. Water tank with handle
11. Filler funnel for preground coffee
12. Bean container cover
13. Aroma preservation cover
14. Steam / hot water draw-off tap
15. Removable Professional Cappuccino Frother with milk pipe
16. Removable hot-water nozzle (see Fig. 5)
17. Height-adjustable coffee spout
18. Coffee grounds container
19. Cup grille
20. Drip tray
21. On/Off button (= Zero-Energy Switch)
22. Metal shelf
10
9
13
14
17
18
11
3
1
2
12
20
478
56
15/16
19
Rotary Switch
13
21
22

5
E
Table of contents
1. Safety instructions ...............................................page 6
1.1 Proper use ..................................................page 6
1.2 Warnings....................................................page 6
1.3 Precautions .................................................page 6
2. Preparing the IMPRESSA ........................................page 7
2.1 Checking the mains voltage .............................page 7
2.2 Checking the electric fuse ................................page 7
2.3 Filling the water tank......................................page 7
2.4 Filling with coffee beans ..................................page 7
2.5 Adjusting the grinder .....................................page 7
3. Using for the first time..........................................page 8
4. Adjusting the water hardness ..................................page 8
5. Using the CLARIS filter cartridge...............................page 9
5.1 Inserting the filter..........................................page 9
5.2 Changing the filter ........................................page 10
6. Rinsing the IMPRESSA...........................................page 10
7. Adjusting the amount of water for coffee....................page 10
8. Preparing 1 cup of coffee .......................................page 11
9. Preparing 2 cups of coffee......................................page 11
10. Preparing preground coffee ....................................page 12
11. Preparing hot water .............................................page 13
12. Preparing steam..................................................page 13
13. Professional Cappuccino Frother ..............................page 14
13.1 Preparing cappuccino with the
Professional Cappuccino Frother ........................page 14
13.2 Preparing hot milk with the
Professional Cappuccino Frother ........................page 15
13.3 Rinsing the Professional Cappuccino Frother..........page 15
13.4 Dismantling and rinsing the
Professional Cappuccino Frother ........................page 16
13.5 Cleaning the Professional Cappuccino Frother ........page 16
14. Switching off the IMPRESSA....................................page 17
15. Programming.....................................................page 17
15.1 Buttons programme item ................................page 19
15.2 Filter programme item....................................page 20
15.3 Water hardness programme item.......................page 20
15.4 Energy programme item .................................page 20
15.5 Automatic switch-off time programme item ..........page 20
15.6 Rinse programme item ...................................page 21
15.7 Reset programme item ...................................page 21
15.8 Counter programme item ................................page 22
15.9 Lock programme item ....................................page 23
15.10 Information programme item ...........................page 24
15.11 ML/OZ display programme item ........................page 25
15.12 Language programme item..............................page 26
16. Maintenance ......................................................page 26
16.1 Filling with water ..........................................page 26
16.2 Emptying coffee grounds container ....................page 26
16.3 Drip tray missing ..........................................page 26
16.4 Filling with coffee beans ..................................page 27
16.5 Changing the filter ........................................page 27
16.6 Cleaning the IMPRESSA...................................page 27
16.7 IMPRESSA calcification ....................................page 27
16.8 General cleaning instructions ............................page 27
16.9 Emptying the system .....................................page 28
17. Cleaning ...........................................................page 28
18. Descaling..........................................................page 29
19. Disposal ...........................................................page 30
20. Tips for a perfect coffee.........................................page 30
21. Messages..........................................................page 31
22. Problems ..........................................................page 32
23. Legal information ................................................page 33
24. Technical data ....................................................page 33

6
Before you get started
Congratulations on purchasing this IMPRESSA. To ensure that your
IMPRESSA works smoothly, please read these instructions for use
carefully and keep them as a future reference.
If you need more information or if you experience any problems
which are not covered in enough detail in these instructions for use,
please contact your local stockist or ourselves.
1. Safety instructions
1.1 Proper use
The machine is designed and intended for commercial use. It should
only be used for coffee preparation and to heat milk and water.
Use for any other purpose will be deemed improper. JURA Elektroap-
parate AG cannot accept any responsibility for the consequences of
improper use.
Before using the machine read these instructions for use thoroughly
and completely and comply with the instructions they contain. Keep
these instructions for use close to the machine and pass them on to
the next user.
1.2 Warnings
䡲The IMPRESSA may only be operated by instructed persons.
䡲Never start up a defective IMPRESSA or an IMPRESSA with a dam-
aged supply cable.
䡲In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from the mains supply
and contact JURA service.
䡲If the mains cable of this machine is damaged, it must be repaired
either directly by JURA or by an authorised JURA service centre.
䡲Never repair or open the IMPRESSA yourself. Repairs and modifi-
cations to the machine may only be undertaken by authorised JURA
service centres using genuine spare parts and accessories. The
machine contains live parts. If opened, there is a danger of poten-
tially fatal injury.
䡲Do not immerse the IMPRESSA in water.
1.3 Precautions
䡲Never subject the IMPRESSA to environmental influences (rain,
snow, frost) and do not operate with wet hands.
䡲Do not set up the IMPRESSA XF50 anywhere where a jet of water
may be used.
䡲Place the IMPRESSA on a sturdy, horizontal surface resistant to any
water leaks. Never place on hot or warm surfaces (hobs). Select a
site out of reach of children.
䡲Be careful to ensure that the mains cable is not trapped and does
not rub against sharp edges.
䡲Always remove the mains plug during long periods of absence
(holidays etc.).
䡲Always remove the mains plug before cleaning.
䡲When removing the mains plug, never tug the supply cable or the
IMPRESSA itself.

7
䡲The IMPRESSA is connected to the power supply by a supply cable.
Make sure people can’t trip over the supply cable, bringing down
the IMPRESSA. Make sure children and pets cannot reach the
machine.
䡲Never put the IMPRESSA or individual parts of it in the dishwasher.
䡲Install the IMPRESSA in a place where the air can circulate well to
prevent it from overheating.
2. Preparing the IMPRESSA
2.1 Checking the mains voltage
The IMPRESSA is set to the right mains voltage by default.
Check whether your mains voltage matches that stated on the
rating plate on the underside of your IMPRESSA.
2.2 Checking the electric fuse
The IMPRESSA is rated for a current of 10 amps. Check whether
a fuse for this rating is fitted.
2.3 Filling the water tank
Only top up with fresh, cold water. Never fill with milk, mineral
water or other liquids.
䡲Remove the water tank and rinse it well with cold mains water
(Fig. 4).
䡲Then fill the water tank and refit in the IMPRESSA. Be careful to
ensure that the tank is correctly inserted and properly engaged.
2.4 Filling with coffee beans
To make sure you get lasting enjoyment from your machine
and to avoid the need for repairs, please note that the grinder
in your JURA coffee machine is not suitable for coffee beans
that have been treated with additives (e.g. sugar) during or
after roasting. Using coffee blends of this type may damage the
grinder. Any resulting repair costs will not be covered by the
warranty conditions.
䡲Fold the bean container cover (12) open and remove the aroma
preservation cover (13).
䡲Remove any dirt or foreign objects from inside the bean container.
䡲Fill the bean container with coffee beans and close the cover.
2.5 Adjusting the grinder
You can adjust the grinder to the suit the degree of roast of your cof-
fee. Our recommendations:
a light roast 씮a finer setting (the smaller the dots, the finer the
grinding)
a dark roast 씮a coarser setting (the larger the dots, the coarser
the grinding)
Only use the switch to adjust the consistency of grind when the
grinder is running.
䡲Open the bean container cover (12) and remove the aroma preser-
vation cover (13).
䡲To adjust the consistency of grind, turn the switch to the desired
position during the grinding operation (Fig. 2).
E

8
3. Using for the first time
䡲Fill the bean container with coffee beans (12).
䡲Switch your IMPRESSA on with the On/Off button (21).
䡲SPRACHE
DEUTSCH
䡲The illuminated ring (2) is active.
䡲Turn the Rotary Switch (1) until the desired language appears on
the display.
䡲Now confirm your selection by pressing the Rotary Switch (1).
䡲FILL
WATER TANK
䡲Remove the water tank (10) and fill with fresh water. Refit the water
tank in your IMPRESSA.
䡲OPEN TAP
䡲Place receptacle under the Professional Cappuccino Frother (15)
(Fig. 10).
䡲Now open the steam / hot water draw-off tap (14) (Fig. 13).
䡲SYSTEM
FILLING
䡲CLOSE TAP
䡲Close the steam / hot water draw-off tap (14).
䡲SYSTEM
FILLING
䡲HEATING
䡲PRESS
RINSE
䡲Press the Maintenance button (3).
䡲The machine rinses.
䡲RINSING
䡲READY
If FILL BEANS appears on the display, again press any coffee
preparation button. The grinder is not yet filled with coffee
beans.
To get a really good crema you can individually adjust the
height-adjustable coffee spout (17) to your cup sizes (Fig. 3).
4. Adjusting the water hardness
Water is heated in the IMPRESSA. Over time this will result in
calcification and this is displayed automatically. The IMPRESSA
must be set to the hardness of the water used. Use the test
strips provided.
1° German hardness corresponds to 1.79° French hardness.
When the filter is activated, the water hardness programme
item disappears.
The IMPRESSA is set to 16° dH by default. You can change this setting.
Proceed as follows:
䡲READY
䡲Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
䡲The illuminated ring (2) is active.
䡲Turn the Rotary Switch (1) until the following message appears on
the display:

9
䡲HARDNESS
䡲Now press the Rotary Switch (1) to enter the programme item.
䡲16° dH
䡲Now turn the Rotary Switch (1) until the desired water hardness
appears.
䡲For example 20° dH.
䡲Confirm the desired water hardness by pressing the Rotary Switch (1).
䡲OK
䡲HARDNESS
䡲Turn the Rotary Switch (1) until the following message appears on
the display:
䡲EXIT
䡲Now press the Rotary Switch (1) to exit programming mode.
䡲READY
5. Using the CLARIS filter cartridge
If you use the CLARIS filter cartridge correctly, your automatic
coffee machine no longer has to be descaled. The DE-SCALE
programme item no longer appears.
5.1 Inserting the filter
䡲Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
䡲The illuminated ring (2) is active.
䡲Turn the Rotary Switch (1) until the following message appears on
the display:
䡲FILTER –
䡲Press the Rotary Switch (1) again to enter this programme item.
䡲NO –
䡲Turn the Rotary Switch (1) until the following message appears on
the display:
䡲YES ⻫
䡲Press the Rotary Switch (1) to activate the filter cartridge.
䡲OK
䡲INSERT
OPEN TAP
䡲Remove and empty the water tank (10).
䡲Fold up the filter holder. Insert the filter cartridge in the water tank,
exerting slight pressure (Fig. 1).
䡲Close the filter holder until it audibly snaps into place.
䡲Fill the water tank with cold, fresh mains water and reinsert the
tank.
䡲Place a sufficiently large receptacle (around 1 litre) under the Pro-
fessional Cappuccino Frother (15) (Fig. 10).
䡲Open the steam / hot water draw-off tap (14) (Fig. 13).
䡲FILTER
RINSING
You can interrupt rinsing of the filter at any time by closing the
steam / hot water draw-off tap (14). To continue with filter rins-
ing, open the steam / hot water draw-off tap (14) again.
䡲CLOSE TAP
䡲Close the steam / hot water draw-off tap (14), your IMPRESSA will
now heat up to coffee temperature.
E

10
䡲HEATING
䡲READY
You have now activated the filter. In programming mode, the
Water hardness programme item HARDNESS no
longer appears.
5.2 Changing the filter
After drawing off around 50 litres of water, the filter will cease
to work. You will be prompted to change the filter. Please use
the scale on the filter holder on the water tank to monitor
how long the CLARIS filter cartridge has been in use (max.
2 months).
䡲READY
FILTER
䡲Press the Maintenance button (3) until the following message
appears:
䡲CHANGE
OPEN TAP
䡲Remove the water tank from the machine and empty it.
䡲Fold up the filter holder. Take out the old CLARIS filter cartridge and
insert the new filter cartridge into the water tank, exerting slight
pressure (Fig. 1).
䡲Close the filter holder until it audibly snaps into place.
䡲Fill the water tank with cold, fresh mains water and reinsert in the
IMPRESSA.
䡲Place a sufficiently large receptacle (around 1 litre) under the Pro-
fessional Cappuccino Frother (15) (Fig. 10) and open the steam / hot
water draw-off tap (14) (Fig. 13).
䡲FILTER
RINSING
䡲CLOSE TAP
䡲Close the steam / hot water draw-off tap (14).
䡲HEATING
䡲READY
6. Rinsing the IMPRESSA
If the IMPRESSA is switched off and has already cooled down,
you are prompted to perform the rinse operation. A rinse oper-
ation is triggered automatically when shutting the coffee ma-
chine down.
䡲Switch your IMPRESSA on with the On/Off button (21).
䡲HEATING
䡲PRESS
RINSE
䡲Press the Maintenance button (3).
䡲RINSING
䡲READY
7. Adjusting the amount of water for coffee
The figure in ML is approximate and may vary from the actual
amount.
The machine automatically doubles the amount of water pro-
grammed for the 2 espressi / 2 coffees preparation but-
tons.

11
You can also change the amount of water during operation.
Turn the Rotary Switch (1) during the brewing operation until
the desired ML figure appears on the display.
You can stop the drawing off of water prematurely by pressing
any button.
It is easy to permanently adjust the amount of water for all spe-
ciality coffees, milk specialities and hot water to the cup size. As
in the following example, adjust the amount of water or milk
once and then this amount will be used each time you prepare
this speciality coffee.
Example:
Permanent setting of amount of water for one espresso:
䡲READY
䡲Press the 1 ESPRESSO preparation button and hold down until the
following message appears on the display.
䡲1 ESPRESSO
䡲ENOUGH COFFEE ?
䡲Press the button again as soon as there is enough coffee in your
cup.
䡲OK
䡲1 ESPRESSO
䡲READY
8. Preparing 1 cup of coffee
You can change the strength at any time before or during the
grinding operation by turning the Rotary Switch (1). You can
choose from 4 strengths ( MILD / NORMAL /
STRONG / XSTRONG).
You can stop preparation at any time by pressing any prepara-
tion button.
䡲READY
䡲Place 1 cup under the height-adjustable coffee spout (17).
䡲Press the 1 coffee preparation button (6).
䡲1 COFFEE
䡲The illuminated ring (2) is active.
䡲You can adjust the desired strength for the current coffee prepara-
tion by turning the Rotary Switch (1) during the grinding operation.
䡲1 COFFEE
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲You can adjust the desired amount of water for the current coffee
preparation by again turning the Rotary Switch (1) during the brew-
ing operation.
䡲For example 100 ML.
䡲Turn the Rotary Switch (1) until the desired amount of water ap-
pears on the display.
䡲For example 110 ML.
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲Your speciality coffee is prepared.
䡲1 COFFEE
䡲READY
9. Preparing 2 cups of coffee
The strength cannot be selected when preparing 2 cups of cof-
fee. You automatically prepare 2 mild cups.
E

12
You can stop preparation prematurely by pressing any prepara-
tion button.
䡲READY
䡲Place 2 cups under the height-adjustable coffee spout (17).
䡲Press the 2 coffees preparation button (7).
䡲2 COFFEES
䡲The illuminated ring (2) is active.
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲You can adjust the desired amount of water for the current coffee
preparation by turning the Rotary Switch (1) during the brewing
operation. The modified ML value relates to 1 cup.
䡲For example 100 ML.
䡲Turn the Rotary Switch (1) until the desired amount of water
appears on the display.
䡲For example 110 ML.
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲Your speciality coffee is prepared.
䡲2 COFFEES
䡲READY
10. Preparing preground coffee
Never use water-soluble instant coffee or instant coffee. We
would recommend always using powder from freshly ground
coffee beans or preground, vacuum-packed coffee. Never add
more than 2 portions of powder. The filler shaft is not designed
for storage. Ensure that the preground coffee you are using is
not ground too fine. This may block the system and the coffee
will then only be dispensed in drips.
If you have added too little powder, the NOT ENOUGH PRE-
GROUND message appears on the display. The IMPRESSA
aborts the operation, ejects the preground coffee and resets
the machine so that it is ready to brew coffee.
You can interrupt preparation prematurely by pressing any
preparation button.
䡲READY
䡲Place 1 or 2 cups under the height-adjustable coffee spout (17).
䡲Open the cover of the filler funnel for preground coffee (11).
䡲FILL
PRE-GROUND
䡲Place 1 or 2 level measuring spoons of preground coffee into the
filler funnel for preground coffee (11) (Fig. 11) and close the cover.
䡲SELECT
BUTTON
䡲Select the 1 coffee preparation button (6) or 2 coffees prepara-
tion button (7).
䡲1 COFFEE
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲The illuminated ring (2) is active.
䡲By turning the Rotary Switch (1), you can individually select the
amount of water for coffee:
䡲For example 110 ML.
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲Your speciality coffee is prepared.
䡲1 COFFEE
䡲READY

13
11. Preparing hot water
To obtain a perfect water flow, fit the removable hot water noz-
zle (Fig. 5). Do not change the removable hot-water nozzle (16)
immediately after drawing off water because it will be hot and
there will be a danger of burns.
When drawing off water, sputtering may occur at the start.
Avoid direct contact with the skin.
䡲READY
䡲Place a cup under the removable hot-water nozzle (16) (Fig. 5).
䡲Open the steam / hot water draw-off tap (14) (Fig. 13).
䡲The illuminated ring (2) is active.
䡲WATER
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲If necessary adjust the amount of water saved by turning the
Rotary Switch (1).
䡲For example 200 ML.
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲Once the desired amount of water is reached, the following appears
on the display:
䡲CLOSE TAP
䡲Close the steam / hot water draw-off tap (14).
䡲READY
Due to the system design, some water may be released before
the TAP is closed.
12. Preparing steam
The steam function is used to prepare milk foam and hot milk
and for cleaning the Professional Cappuccino Frother (15).
If the optional 2-stage frothing nozzle is fitted, the steam func-
tion can be used to heat liquids and produce foam.
Make sure that the nozzle is fitted correctly when preparing
steam. If the nozzle becomes blocked with particles of milk
residue or is incorrectly assembled, it may disengage and come
off while the frother is in use.
Due to the system design, some water will escape at first when
stream is drawn off. However, this will not affect the result in
any way.
When drawing off , sputtering may occur at the start. The noz-
zle gets hot during operation. Avoid direct contact with the
skin.
䡲READY
䡲Press the steam preselection button (8).
䡲HEATING
䡲READY
䡲Open the steam / hot water draw-off tap (14) (Fig. 13) to draw off
steam.
䡲The illuminated ring (2) is active.
䡲STEAM
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲You can adjust the steam preparation time individually by turning
the Rotary Switch (1) until the desired number of SEC appear on the
display.
E

14
䡲For example 25 SEC.
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲If you do not change the steam preparation time on the Rotary
Switch (1), you prepare the saved amount of steam.
䡲Once the amount of steam is reached, the following message
appears on the display:
䡲CLOSE TAP
䡲Close the steam / hot water draw-off tap (14).
䡲READY
The machine is ready to prepare steam for around 40 sec., then
the machine is reset so that it is ready to brew coffee.
You can prematurely stop steam preparation at any time by
closing the steam / hot water draw-off tap (13).
Due to the system design, some steam may be released before
the tap is closed. There is a danger of scalding.
13. Professional Cappuccino Frother
13.1 Preparing cappuccino with the Professional
Cappuccino Frother
Cappuccino is made up of one third espresso, one third warm
milk and one third milk foam. The Professional Cappuccino
Frother (15) is used for preparing the milk portion.
When steam is drawn off, a negative pressure is created and
this draws milk with the aid of the Professional Cappuccino
Frother (15) and produces milk foam.
You can also heat up milk by turning the selector switch on the
Professional Cappuccino Frother to the Milk position (Fig. 20).
To avoid malfunctions, the Professional Cappuccino Frother (15)
must be cleaned regularly.
Make sure that the nozzle is fitted correctly. If the nozzle
becomes blocked with particles of milk residue or is incorrectly
assembled, it may disengage and come off while the frother is
in use.
䡲When using for the first time, remove the protective cover from the
Professional Cappuccino Frother (Fig. 6). The protective cover is
used only during transport to protect the nozzle against contami-
nant ingress.
䡲Remove the milk pipe from the Welcome Pack and connect it to
the Professional Cappuccino Frother.
䡲Insert the other end of the milk pipe into a milk carton or connect
it to a milk container (Fig. 7).
䡲Place a cup under the Professional Cappuccino Frother (Fig. 7).
The high-quality stainless steel container is a practical addition
for all lovers of milk specialities. It keeps the milk cool through-
out the day and is fully in keeping with the design of your
IMPRESSA.
All original JURA accessories are available from stockists.
䡲Turn the selector switch on the Professional Cappuccino Frother to
the Milk Foam position (Fig. 18).
䡲READY
䡲Press the steam preselection button (8).
䡲HEATING
䡲READY

15
䡲Open the steam / hot water draw-off tap (Fig. 13) to draw off steam.
The milk foam is prepared.
䡲The illuminated ring (2) is active.
䡲STEAM
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲You can adjust the steam preparation time individually by turning
the Rotary Switch (1) until the desired number of SEC appear on the
display.
䡲For example 25 SEC.
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲If you do not change the steam preparation time on the Rotary
Switch (1), you prepare the saved amount of steam.
Adjust the steam preparation time to suit the size of your cup.
䡲Once the amount of steam is reached, the following message
appears on the display:
䡲CLOSE TAP
䡲Close the steam / hot water draw-off tap (14).
䡲READY
The machine is ready to prepare steam for around 40 sec., then
the machine is reset so that it is ready to brew coffee.
You can prematurely stop steam preparation at any time by
closing the steam / hot water draw-off tap (14).
Due to the system design, some steam and milk may be re-
leased before the tap is closed. There is a danger of scalding.
䡲Now, move your cup with the milk foam under the coffee spout
and draw off the desired speciality coffee (Fig. 8). Your cappuccino
is ready.
13.2 Preparing hot milk with the Professional
Cappuccino Frother
Turn the selector switch on the Professional Cappuccino Frother
to the Milk position (Fig. 20).
The operation for preparing hot milk is the same as that for
preparing milk foam for a cappuccino (see chapter 13 ‘Preparing
cappuccino with the Professional Cappuccino Frother’).
13.3 Rinsing the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (15) works
perfectly, you should rinse it with water after every milk prepa-
ration.
Your IMPRESSA will not prompt you to rinse the Professional
Cappuccino Frother.
䡲READY
䡲Remove the milk pipe from the milk carton or the milk container.
䡲Fill a receptacle with fresh water and immerse the milk pipe in it.
䡲Place a receptacle under the Professional Cappuccino Frother and
move the selector switch to the Milk foam or Milk position.
䡲Press the steam preselection button (8).
䡲HEATING
䡲READY
E

16
䡲Open the steam / hot water draw-off tap (14) (Fig. 13) to draw off
steam. The frother and milk pipe are rinsed.
䡲STEAM
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲Ignoring the CLOSE TAP display message, draw off steam until
clean water runs out of the frother. Then close the steam / hot water
draw-off tap (14).
䡲READY
13.4 Dismantling and rinsing the Professional
Cappuccino Frother
䡲Carefully remove the Professional Cappuccino Frother (15) from
your IMPRESSA by twisting slightly.
䡲Dismantle the Professional Cappuccino Frother (15) into its indiv-
idual parts (Fig. 16).
䡲Rinse all frother parts thoroughly under running water.
䡲Re-assemble the frother and refit it on your IMPRESSA.
13.5 Cleaning the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (15) always
works properly, you should clean it daily when you have been
preparing milk foam or hot milk.
Your IMPRESSA will not prompt you to clean the Professional
Cappuccino Frother.
JURA Cappuccino Cleaner is available from stockists.
䡲Place a receptacle under the Professional Cappuccino Frother (Fig. 9).
䡲Fill a second receptacle with 2.5 dl of fresh water and add a capful
of JURA Cappuccino Cleaner.
䡲Immerse the milk pipe in the second receptacle with the JURA Cap-
puccino Cleaner (Fig. 9).
䡲READY
䡲Press the steam preselection button (8).
䡲HEATING
䡲READY
䡲Open the steam / hot water draw-off tap (Fig. 13) to draw off steam.
䡲STEAM
䡲
䡵䡵䡵䡺䡺䡺䡺䡺䡺䡺
䡲Ignoring the CLOSE TAP display message, draw off steam until the
receptacle containing JURA Cappuccino Cleaner is empty.
The Professional Cappuccino Frother and the milk pipe are cleaned.
䡲Close the steam / hot water draw-off tap.
䡲READY
The machine is ready to prepare steam for around 40 sec., then
the machine is reset so that it is ready to brew coffee.
䡲Fill the receptacle with 2.5 dl of fresh water.
Immerse the milk pipe in the receptacle containing fresh water.
When READY appears on the , press the steam pre-
selection button (8) again to ready the machine to prepare
steam.
䡲Open the steam / hot water draw-off tap (Fig. 13) to draw off steam.

17
䡲Ignoring the CLOSE TAP display message, draw off steam until
the receptacle containing fresh water is empty. Then close the
steam / hot water draw-off tap (14).
The Professional Cappuccino Frother (15) and the milk pipe are
rinsed with fresh water.
䡲Cleaning of the Professional Cappuccino Frother is complete, your
IMPRESSA is ready for use.
14. Switching off the IMPRESSA
䡲READY
䡲Switch the IMPRESSA off with the On/Off button (21).
䡲RINSING
䡲Automatic switch-off rinse is started.
Just one automatic rinse is started if at least 1 speciality coffee
has been prepared. Otherwise the machine switches off with-
out a rinse.
15. Programming
The IMPRESSA is configured in the factory such that you can
prepare coffee without any additional programming. You can
individually program various settings to adapt your beverages
to your personal taste.
You can program the following settings:
쐌RINSE
쐌BUTTONS
쐌FILTER –
쐌HARDNESS
쐌ENERGY –
쐌OFF AFTER
쐌RINSING
쐌RESET
쐌COUNTER
쐌LOCK
쐌INFO
쐌DISPLAY
쐌LANGUAGE
Rotary Switch
Permanent settings in programming mode always follow the
same model. To enter programming mode, press the Rotary
Switch (1) until RINSE appears on the display. By turning the
Rotary Switch (1) you can change the set values and select dif-
ferent programme items. By pressing the Rotary Switch (1) you
can view values or save selected values.
E

18
You can select and adapt the following programme items to your
needs:
Programme
item Sub-item Explanation
RINSE RINSE
FILTER (only
appears if filter is
activated)
CLEAN
DE-SCALE (only
appears if filter is
not activated)
EXIT
BUTTONS SELECT
BUTTON
EXIT
FILTER –/⻫NO –
YES ⻫
HARDNESS INACTIVE
(only 1° – 30° dH
appears if
filter is not
activated)
ENERGY –/⻫SAVE –
SAVE ⻫
OFF AFTER 15 MIN to 15 HRS
RINSING MANUAL
AUTOMATIC
Programme
item Sub-item Explanation
RESET PRODUCT
ALL PROD.
RESET ALL
EXIT
COUNTER DELETE YES ⻫
DELETE NO –
LOCK BUTTONS
PRE-SELECT
MAINTAIN
EXIT
INFO BUTTONS
CLEAN
FILTER (only
appears if filter is
activated)
DE-SCALE (only
appears if filter is
not activated)
VERSION
EXIT
DISPLAY ML
OZ
LANGUAGE DEUTSCH
ENGLISH
FRANCAIS
ITALIANO
NL
ESPANOL
PORTUGUES
РУССКИЙ
Select the desired maintenance pro-
gramme. If no action is taken, pro-
gramming mode is exited automati-
cally after approximately five sec-
onds. For more information, please
refer to chapters 6 and 16 to 18.
Select your settings for speciality
coffees, milk specialities and hot
water.
Indicate whether you want to operate
your IMPRESSA with or without a
CLARIS filter cartridge.
Adjust the water hardness.
Select an energy-saving mode.
Set the number of hours after which
the IMPRESSA should switch off auto-
matically.
Set whether the switch-on rinse
should be started manually or auto-
matically.
Reset the settings for individual
products, all products or the entire
machine to the factory setting.
Refer to the counter for information
about the products consumed and
reset to zero if necessary.
Lock individual speciality coffees, the
aroma preselection and the amount
of water adjustment during coffee
preparation or the maintenance
functions.
Keep track of all prepared speciality
coffees and milk specialities and view
the maintenance status.
Select the unit for the amount of
water.
Select your language.

19
15.1 Buttons programme item
With the BUTTONS programme item you can enter
individual settings for all speciality coffees, milk and hot water.
Permanent settings in programming mode always follow the
same model.
The following permanent settings can be made for speciality coffees,
milk and hot water:
Product Amount of water Strength Temperature
1 espresso 25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
2 espressi 25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
1 coffee 25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
2 coffees 25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
Milk 3 – 120 SEC
Hot water 25 ML – 450 ML NORMAL, HIGH
For example:
Proceed as follows to change the amount of water for a coffee from
100 ML to 110 ML, to change the strength from NORMAL to STRONG
and the temperature from NORMAL to HIGH.
䡲Press the Rotary Switch (1) until the following message appears on
the display:
䡲RINSE
䡲Turn the Rotary Switch (1) again until the following message ap-
pears on the display:
䡲BUTTONS
䡲Press the Rotary Switch (1).
䡲SELECT
BUTTON
䡲Press the preparation button for the speciality coffee for which you
want to adjust the amount of water. For example, 1 COFFEE.
䡲WATER
䡲Press the Rotary Switch (1).
䡲For example 100 ML.
䡲Turn the Rotary Switch (1) to adjust the amount of water as desired.
䡲For example 110 ML.
䡲Press the Rotary Switch (1) to save the new amount of water.
䡲OK
䡲WATER
䡲Turn the Rotary Switch (1) further until the next sub-item appears
on the display:
䡲STRENGTH
䡲Press the Rotary Switch (1).
䡲NORMAL
䡲Turn the Rotary Switch (1) until the following message appears on
the display:
䡲STRONG
䡲Press the Rotary Switch (1) to save the change.
䡲OK
䡲STRENGTH
䡲Turn the Rotary Switch (1) further until TEMPERATURE appears on
the display.
䡲Press the Rotary Switch (1).
䡲NORMAL
䡲Turn the Rotary Switch (1) to adjust the temperature.
E

20
䡲HIGH
䡲Press the Rotary Switch to confirm your selection.
䡲OK
䡲TEMP.
䡲Turn the Rotary Switch (1) until EXIT appears on the display.
䡲Press the Rotary Switch (1).
䡲SELECT
BUTTON
䡲Turn the Rotary Switch (1) again until EXIT appears on the display.
䡲Press the Rotary Switch (1).
䡲BUTTONS
䡲Turn the Rotary Switch (1) again until EXIT appears on the display.
䡲Press the Rotary Switch (1) to exit programming mode.
䡲READY
15.2 Filter programme item
For details, please refer to chapter 5.1 ‘Inserting the filter’.
15.3 Water hardness programme item
For details, please refer to chapter 4 ‘Adjusting the water hardness’.
15.4 Energy programme item
The IMPRESSA is equipped with the new On/Off button (21)
(= Zero-Energy Switch). This allows the machine to be fully dis-
connected from the mains. An Energy Save Mode (E.S.M.©) can
also be permanently set.
䡲READY
䡲Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
䡲The illuminated ring (2) is active.
䡲Turn the Rotary Switch (1) until ENERGY – appears on the display.
䡲Press the Rotary Switch (1).
䡲SAVE –
䡲Turn the Rotary Switch (1) until the following message appears on
the display:
䡲SAVE ⻫
䡲Press the Rotary Switch (1) again to confirm the change.
䡲OK
䡲ENERGY ⻫
䡲Turn the Rotary Switch (1) until EXIT appears on the display.
䡲Press the Rotary Switch (1) to exit programming mode.
䡲READY
15.5 Automatic switch-off time programme item
You can program when your IMPRESSA is to switch off. Select a
time between 15 min. and 15 hrs.
䡲READY
䡲Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
䡲The illuminated ring (2) is active.
䡲Press the Rotary Switch (1) until you reach the OFF AFTER pro-
gramme item.