Jura IMPRESSA C60 User manual

IMPRESSA C60/C65 Instructions for Use
The Instructions for Use has been awarded the seal of approval by the
independent German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage of safety
aspects.

2
Table of contents
Your IMPRESSA C60/C65
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety...............................................................................................................................................6
1 Preparing and using for the first time 10
JURA on the Internet....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container...........................................................................................................................10
First-time use ................................................................................................................................................10
Determining the water hardness ..............................................................................................................13
Adjusting the grinder ..................................................................................................................................13
Filling the water tank...................................................................................................................................14
Connecting milk...........................................................................................................................................15
2 Preparation 16
Espresso and coffee.....................................................................................................................................16
Two speciality coffees at the touch of a button......................................................................................17
Cappuccino....................................................................................................................................................17
Milk foam.......................................................................................................................................................18
Ground coffee...............................................................................................................................................19
Permanently setting the amount of water for the cup size ................................................................20
Hot water.......................................................................................................................................................21
3 Daily operation 22
Switching on ................................................................................................................................................22
Daily maintenance......................................................................................................................................22
Switching off ................................................................................................................................................23
4 Permanent settings in programming mode 24
Product settings ..........................................................................................................................................25
Setting the water hardness .......................................................................................................................26
Energy-saving mode ..................................................................................................................................26
Automatic switch-off..................................................................................................................................27
Unit for amount of water...........................................................................................................................28
Language......................................................................................................................................................28
5 Maintenance 29
Rinsing the machine...................................................................................................................................29
Rinsing the fine foam frother....................................................................................................................30
Cleaning the fine foam frother.................................................................................................................30
Dismantling and rinsing the fine foam frother.......................................................................................31
Dismantling and rinsing the professional fine foam frother...............................................................32
Inserting and activating the filter.............................................................................................................33
Changing the filter......................................................................................................................................34
Cleaning the machine ................................................................................................................................35
Descaling the machine ..............................................................................................................................36
Cleaning the bean container.....................................................................................................................38
Descaling the water tank ...........................................................................................................................39

3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to
perform some action.
EInformation and tips to make it even easier to use your IMPRESSA.
COFFEE Display
Symbol description
6 Display messages 40
7 Troubleshooting 42
8 Transport and environmentally friendly disposal 44
Transport/ Emptying the system.............................................................................................................44
Disposal.........................................................................................................................................................44
9 Technical data 45
10 Index 46
11 JURA contact details/ Legal information 48

4
Control elements
Control elements
1
4
3
2
5
6
8
7
11
15
12
9
10
13
14
1 QOn/Off button
2 Water tank cover
3 Water tank
4 Mains cable (back of the machine)
5 Height-adjustable coffee spout
6 Coffee grounds container
7 Drip tray
8 Cup grille
9 Filler funnel cover
10 Filler funnel for ground coffee
11 Bean container cover
12 Grinder adjustment switch
13 Bean container with aroma preservation
cover
14 Switch for hot water and steam preparation
15 Fine foam frother

5
Control elements
3
1
2
4 5
1 Display
2 Rotary Switch
3 OP symbol (programming)
4 cMaintenance symbol
5 nSteam symbol
The Connector System©permits the use of different cappuccino frothers. These are available
from stockists.
Professional fine foam frother Fine foam frother
Milk foam
Hot milk
Milk foam

6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsi-
bility for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UNever use a machine which is damaged or has
a defective mains cable.
UIn the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and con-
tact JURA service.
UIf the mains cable of this machine is damaged,
it must be repaired either directly by JURA or
by an authorised JURA service centre.
UMake sure that the IMPRESSA and the mains
cable are not located close to hot surfaces.
UBe careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
Proper use
For your safety
J

7
Important information
UNever open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
UTo completely and safely disconnect the
machine from the power supply, first switch
off the IMPRESSA using the On/Off button and
then at the power switch. Only then should
you remove the mains plug from the power
socket.
There is a risk of scalds or burns on the spouts and
fine foam frother:
UPlace the machine out of the reach of children.
UDo not touch any hot parts. Use the handles
provided.
UBe careful to ensure that the fine foam frother
is correctly installed and clean. If incorrectly
fitted or if it becomes blocked, the fine foam
frother or its parts might come off.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UNever allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
UProtect the IMPRESSA from environmental
influences such as rain, frost and direct sun-
light.

8
Important information
UDo not immerse the IMPRESSA, mains cable or
connections in water.
UDo not put the IMPRESSA or any individual
parts in the dishwasher.
USwitch your IMPRESSA off at the power switch
before any cleaning operation. Always wipe
the IMPRESSA with a damp cloth rather than a
wet one, and protect it from prolonged expo-
sure to water splash.
UOnly connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your IMPRESSA. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
UPlease only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
IMPRESSA.
UDo not use any coffee beans treated with addi-
tives or caramelised coffee beans.
UOnly fill the water tank with fresh, cold water.
USwitch the machine off at the power switch if
you are going to be absent for a longer period
of time.
UChildren may not clean or service the machine
unless supervised by a responsible person.
UDo not allow children to play with the machine.
UKeep children under the age of 8 away from
the machine, or supervise them constantly.

9
Important information
UChildren aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Chil-
dren must be able to recognise and under-
stand the potential dangers arising from incor-
rect use.
People, including children, who
Udo not have the physical, sensory or mental
capabilities to use the machine safely or
Uare inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Blue filter car-
tridge:
UFilter cartridges should be kept out of the
reach of children.
UStore filter cartridges in a dry place in the
sealed packaging.
UProtect cartridges from heat and direct sun-
light.
UDo not use damaged filter cartridges.
UDo not open filter cartridges.

10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
When setting up your IMPRESSA, please note the following:
UPlace the IMPRESSA on a horizontal surface that is not sensi-
tive to water.
UChoose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
TOpen the bean container cover and remove the aroma pres-
ervation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Blue fil-
ter cartridge. If the water hardness is 10°dH or more, we recommend
using the filter cartridge. If you do not know the hardness of your
water, you can find this out first (see Chapter 1 ‘Preparing and using
for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
JURA on the Internet
Setting up the machine
Filling the bean container
CAUTION
First-time use
JWARNING

11
1 Preparing and using for the first time
Precondition:The bean container has been filled.
TInsert the mains plug into a power socket.
 Q TPress the On/Off button to switch the IMPRESSA on.
SPRACHE DE appears on the display.
 g TTurn the Rotary Switch until the required language is dis-
played, e.g. LANGUAGE EN.
 k TPress the Rotary Switch to confirm the language.
OK appears briefly on the display to confirm the setting.
FILTERw/ YES
ENow decide whether you want to operate your IMPRESSA with
or without a CLARIS Blue filter cartridge.
 k TPress the Rotary Switch.
OK appears briefly on the display.
FILTER INSERT, the Maintenance symbolclights up.
 c TTouch the Maintenance symbol.
FILL TANK
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TOpen the filter holder.
TRemove the CLARIS Blue filter cartridge from the Welcome
Pack.
TInsert the CLARIS Blue filter cartridge into the water tank,
exerting slight pressure.
TClose the filter holder. It will click into place audibly.
EAfter two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN, the light segment on the switch lights up.
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
 h TTurn the switch to themposition.
FILTER RINSING, water flows out of the fine foam
frother.
First-time use with filter
cartridge activation

12
1 Preparing and using for the first time
EYou can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
EThe water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500ml. SWITCH CLOSE appears on the display.
 j TTurn the switch to the oposition.
SYSTEM FILLING, the system fills up with water.
HEATING, the machine heats up.
RINSING, the system is rinsed. Water flows out of the cof-
fee spout. The rinse stops automatically. ESPRESSO
appears on the display. Your IMPRESSA is ready for use.
 g TTurn the Rotary Switch until FILTER- / NO is displayed.
 k TPress the Rotary Switch.
OK appears briefly on the display.
16°dH
EIf you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
 g TTurn the Rotary Switch to change the water hardness set-
ting, e.g. to 25°dH.
 k TPress the Rotary Switch.
OK appears briefly on the display.
FILL TANK
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN, the light segment on the switch lights up.
First-time use without filter
cartridge activation

13
1 Preparing and using for the first time
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
 h TTurn the switch to themposition.
SYSTEM FILLING, the system fills up with water.
SWITCH CLOSE
 j TTurn the switch to the oposition.
SYSTEM FILLING, the system fills up with water.
HEATING, the machine heats up.
RINSING, the system is rinsed. Water flows out of the cof-
fee spout. The rinse stops automatically. ESPRESSO
appears on the display. Your IMPRESSA is ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind dur-
ing the preparation of an espresso.
TPlace a cup under the coffee spout.
Determining the water
hardness
Adjusting the grinder
CAUTION

14
1 Preparing and using for the first time
TOpen the bean container cover and remove the aroma pres-
ervation cover.
 k TPress the Rotary Switch to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
TFit the aroma preservation cover.
TClose the bean container cover.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
Filling the water tank
CAUTION

15
1 Preparing and using for the first time
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 4–8°C. We would therefore recom-
mend using a milk cooler or a vacuum milk container.
TRemove the protective cover from the fine foam frother.
TConnect the milk pipe to the fine foam frother. To do this,
attach the end of the milk pipe to the connector on the right-
hand side of the fine foam frother. Use the short pipe for a
milk container and the long pipe for a milk carton.
TConnect the other end of the milk pipe to a milk container
or immerse it in a milk carton. (Figure: JURA 0.4 litre stain-
less steel vacuum milk container).
Connecting milk

16
2 Preparation
2 Preparation
EYou can stop the machine at any time while a speciality coffee,
steam or hot water is being prepared. Just press the Rotary
Switch (for a speciality coffee) or return the switch to its origi-
nal position (for steam and hot water).
EDuring the grinding operation you can select the coffee
strength of single products by turning the Rotary Switch g:
MILD, NORMAL, STRONG or EXTRA.
EDuring preparation, you can change the preset amount of
water for a speciality coffee by turning the Rotary Switch g.
EYou can follow the current status of preparation on the pro-
gress bar.
EThe last speciality coffee prepared is always displayed, even if
the IMPRESSA was switched off in the meantime.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
Espresso and coffee are both prepared following this model.
Example:Proceed as follows to prepare one coffee.
Precondition:ESPRESSO is displayed (example).
TPlace a cup under the coffee spout.
 g TTurn the Rotary Switch until COFFEE is displayed.
 k TPress the Rotary Switch.
Preparation starts. COFFEE and the coffee strength are
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically. COFFEE appears on the
display.
Espresso and coffee

17
2 Preparation
When you prepare two drinks at once, the amount of water selected
for the single product is used for each cup.
The preparation of twoespressi and twocoffees follows this same
model.
Example:Proceed as follows to prepare two espressi.
Precondition:ESPRESSO is displayed (example).
TPlace two espresso cups under the coffee spout.
 k TPress the Rotary Switch twice (within 2 seconds), to start
preparation of two espressi.
2 CUPS
Preparation starts. The preset amount of water flows into
the cups.
Preparation stops automatically. ESPRESSO appears on
the display (example).
For a cappuccino you must first froth the milk using the fine foam
frother. You then prepare an espresso straight into the milk foam.
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
Precondition: ESPRESSO is displayed (example). Milk is con-
nected to the fine foam frother.
TPlace a cup under the fine foam frother.
EIf you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
 n TTouch the Steam symbol.
HEATING/ STEAM
As soon as the machine has heated up, STEAM/ READY
appears, the light segment on the switch lights up.
 h TTurn the switch to themposition.
STEAM appears and the milk foam is prepared.
 j TWhen the cup is about two thirds full of milk foam, turn the
switch to theoposition.
STEAM/ READY
Two speciality coffees at
the touch of a button
Cappuccino

18
2 Preparation
EYou can continue to prepare steam for the next 40 seconds or
so without the machine having to heat up again.
ETouch the Steam symbol n. ESPRESSO appears on the dis-
play (example). Now you can prepare speciality coffees again.
TPlace the cup under the coffee spout.
 k TPress the Rotary Switch.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically. ESPRESSO appears on
the display.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). Your
IMPRESSA will not prompt you to clean the fine foam frother.
EThis chapter applies to the professional fine foam frother and
the fine foam frother.
EWith the professional fine foam frother, available as an
optional accessory, you can also prepare hot milk.
Example:Proceed as follows to prepare milk foam.
Precondition: ESPRESSO is displayed (example). Milk is con-
nected to the fine foam frother.
TPlace a cup under the fine foam frother.
EIf you are using the professional fine foam frother, turn the
selector switch to the Milk Foam positioné.
 n TTouch the Steam symbol.
HEATING/ STEAM
As soon as the machine has heated up, STEAM/ READY
appears, the light segment on the switch lights up.
 h TTurn the switch to themposition.
STEAM appears and the milk foam is prepared.
 j TWhen there is enough milk foam in the cup, turn the switch
back to the oposition.
STEAM/ READY
Milk foam

19
2 Preparation
EYou can continue to prepare steam for the next 40 seconds or
so without the machine having to heat up again.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). Your
IMPRESSA will not prompt you to clean the fine foam frother.
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
ENever add more than two level measuring spoons of ground
coffee.
EUse ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EIf you did not fill the machine with a sufficient amount of
ground coffee, LOW FILL GROUND C is displayed and the
IMPRESSA stops the operation.
EThe desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation and is once
more ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example: Proceed as follows to prepare a coffee using ground
coffee.
Precondition:ESPRESSO is displayed (example).
TPlace a cup under the coffee spout.
 g TTurn the Rotary Switch until GROUND C is displayed.
 k TPress the Rotary Switch.
FILL GROUND C
Ground coffee

20
2 Preparation
TOpen the cover of the filler funnel for ground coffee.
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
 k TPress the Rotary Switch.
ESPRESSO (example)
 g TTurn the Rotary Switch until COFFEE is displayed.
 k TPress the Rotary Switch.
Preparation starts. COFFEE, the preset amount of water
for coffee flows into the cup.
Preparation stops automatically. COFFEE appears on the
display.
It is easy to make permanent settings for the amount of water for all
speciality coffees according to the cup size. Adjust the amount once
as shown in the following example. Every time you prepare a drink
in the future, this amount of water will be dispensed.
The process for permanently adapting the amount of water to the
cup size is the same for all speciality coffees.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:ESPRESSO is displayed (example).
TPlace a cup under the coffee spout.
 g TTurn the Rotary Switch until COFFEE is displayed.
 k TPress and hold the Rotary Switch.
COFFEE
 k TContinue to hold the Rotary Switch until ENOUGH
COFFEE? appears.
 k TRelease the Rotary Switch.
Preparation starts and the coffee flows into the cup.
 k TAs soon as there is sufficient coffee in the cup, press the
Rotary Switch.
Preparation stops. OK appears briefly on the display. The set
amount of water for one coffee is permanently stored.
COFFEE appears on the display.
Permanently setting the
amount of water for the
cup size