Jura IMPRESSA XF50 Classic Configuration guide

My Coffee Shop Pty Ltd
ACN 102 850 037
1473-1475 Malvern Road
len Iris VIC 3146
ph: 03 9946 4160
fax: [phone]
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365 487 www.mycoffeeshop.com.au
Jura Impressa XF50
Operating & cleaning Instructions

Control elements
1. Rotary Switch
2. Illuminated ring
3. Maintenance button
4. Preparation button, 1 espresso
5. Preparation button, 2 espressi
6. Preparation button, 1 coffee
7. Preparation button, 2 coffees
8. Steam preselection button
9. Display dialogue system
10. Water tank with handle
11. Filler funnel for preground coffee
12. Bean container cover
13. Aroma preservation cover
14. Steam / hot water draw-off tap
15. Removable Professional Cappuccino Frother with milk pipe
16. Removable hot-water nozzle (see Fig. 5)
17. Height-adjustable coffee spout
18. Coffee grounds container
19. Cup grille
20. Drip tray
21. On/Off button (= Zero-Energy Switch)
22. Metal shelf
10
9
13
14
17
18
11
3
1
2
12
20
478
56
15/16
19
Rotary Switch
13
21
22

Operating Instructions
My Coffee Shop Pty Ltd
ACN 102 850 037
1473-1475 Malvern Road
len Iris Vic 3146
ph: 03 9946 4160
fax: [phone]
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365 487 www.mycoffeeshop.com.au
Cappuccino
1. Place your cup / mug under the milk / coffee spout on the right.
2. Turn the milk selector to the foam milk position – See diagram below.
3. Press the cappuccino key. Your cappuccino will now be poured
Flat white
1. Place your cup/mug under the spout on the right.
2. Turn the milk selector to the flat milk position – See diagram below.
3. Press the Latte macchiato key. Your flat white will now be poured
Café Latte
1. Follow the procedure for making a cappuccino.
2. When your cup or glass 1/3 full of foam milk, turn the milk selector to the flat milk position.
Espresso or Long Black
1. Place your cup / mug under the middle spouts and press espresso or coffee key. Your drink
will now be poured. Press the button twice for a double espresso or two long blacks.
Note: Each key is fully programmed however you can stop the milk and coffee flow short by pressing
any key while it is pouring. Adjustments to suit personal preference can also be made using
the rotary dial. These changes do not affect the programmed settings.

Cleaning Products – Jura Impressa XF50
My Coffee Shop Pty Ltd
ACN 102 850 037
1473-1475 Malvern Road
len Iris Vic 3146
ph: 03 9946 4160
fax: [phone]
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365 487 www.mycoffeeshop.com.au
Daily
See procedure – Daily milk system clean
Must be performed at the end of each day just before the machine is turned off
Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways
Use Cafetto daily milk cleaner – 1 litre bottle (Prod no. 71144)
Weekly
See procedure – Weekly milk system clean
Performed once per week
Purpose: To remove any build up of milk fats to ensure the milk frother works correctly
Use Cafetto weekly milk cleaner – 1 litre bottle (Prod no. 71145)
When prompted
Clean machine – See procedure (Coffee system clean)
Performed only when prompted (Every 220 coffees)
Purpose: Removes coffee oil from the brewing unit and coffee path to maintain the quality of the coffee
Use Jura cleaning tablets
- 6 pk (Prod no. 71111)
- 25 pk (Prod no. 71112)
See procedures – Changing the filter or Descaling the machine
Perform a filter change or descale only when prompted.
Purpose: Protects against lime scale build up inside the machine maintaining water & steam paths
Prod no.71131
9 pk – Prod no. 71121
36 pk – Prod no. 71122

My Coffee Shop Pty Ltd
ACN 102 850 037
1473 - 1475 Malvern Rd
Glen Iris VIC 3146
ph: 03 9946 4160
fax: [phone]
93/1-5 Harwood St
Sydney NSW 2009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365 487 www.mycoffeeshop.com.au
Daily milk system clean
1. Fill a cleaning jug with 250 ml of cold water and add 15ml of cappuccino
cleaning solution.
2.Lift the milk pipe up out of the cooler and place it into the cleaning jug. Place the second
cleaning jug under the steam outlet.
3.
Select steam. The machine will heat for 20 sec and then display ready.
4. Open the steam tap. Draw half of the cleaning solution through the milk frother in the froth milk
position and half in the flat milk position.
5.Rinse the cleaning container jug and fill it with 250 ml of cold water. Repeat step 4to rinse
the auto frother.

Weekly milk system clean
My Coffee Shop Pty Ltd
ACN 102 850 037
1473-1475 Malvern Road
len Iris Vic 3146
ph: 03 9946 4160
fax: [phone]
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365 487 www.mycoffeeshop.com.au
Complete this procedure once a week after the daily milk system clean
1. Remove the automatic milk frother from the machine. (Fig 1 - 2)
2. Separate the automatic milk frother into 4 parts. (Fig 3)
3. Soak parts in 250ml of warm water & 15ml of Cafetto red weekly solution (71145) for 20 min.
4. Remove the parts from the solution and rinse them under cold tap water.
5. Re-assemble the auto frother and refit onto the machine.
Figure 1
Figure 2
Figure 3

Precondition: READY / CLEAN
1
EMPTY TRAY
2
3
4
5
6
PRESS RINSE
7
CLEANING
ADD TABLET
8
9
10
PRESS RINSE
11
CLEANING
EMPTY TRAY
12
13
14
HEATING
READY
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
IMPRESSA XF50 Classic
Coffee system clean
Approximate duration 15 min.
J
These short instructions do not replace
the ‘IMPRESSA XF50 Instructions for Use’.
Make sure you read and observe the
safety information and warnings first in
order to avoid hazards.
Equipment required:
2-phase cleaning tablets
Tub of 25 (Art. 62535)
Pack of 6(Art. 62715)

IMPRESSA XF50 Classic
Precondition: READY /
DE-SCALE
1
EMPTY TRAY
2
3
4
5
AGENT IN TANK
6
8
9
OPEN TAP
AGENT IN TANK
3x
10
11
DE-SCALING
CLOSE TAP
12
DE-SCALING
EMPTY TRAY
13
14
15
FILL WATER TANK
16
17
OPEN TAP
c
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
Descaling the machine
Approximate duration 40 min.
J
These short instructions do not replace
the ‘IMPRESSA XF50 Instructions for Use’.
Make sure you read and observe the
safety information and warnings first in
order to avoid hazards.
Equipment required:
Descaling tablets
Tub of 36 (Art. 70751)
Pack of 3 (Art. 61848)

18
DE-SCALING
CLOSE TAP
19
DE-SCALING
EMPTY TRAY
20
21
22
READY

IMPRESSA XF50 Classic
Precondition: READY /FILTER
1
CHANGE
OPEN TAP
2
3
4
5
6
7
8
FILTER RINSING
CLOSE TAP
9
HEATING
READY
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
Changing the filter
J
These short instructions do not replace
the ‘IMPRESSA XF50 Instructions for Use’.
Make sure you read and observe the
safety information and warnings first in
order to avoid hazards.
Equipment required:
CLARIS Pro Blue filter cartridge
Pack of 4 (Art. 69670)

Troubleshooting:
Milk flow
 No milk flow
 Milk spluttering
 Not filling cups
 Froth milk is flat & cool
My Coffee Shop Pty Ltd
ACN 102 850 037
1473-1475 Malvern Road
len Iris Vic 3146
ph: 03 9946 4160
fax: [phone]
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: [phone]
[e-mail] 1300 365 487 www.mycoffeeshop.com.au
Solution:
1. Remove the air suction. (Fig 1)
2. Check the valve on the tip of the air suction is clean and is able to open and close freely. Squeeze the valve
between your figures, it should open, release it and it should close. (Fig 2)
3. Refit the air suction. Turn the milk selector to the froth position (Fig 3), and test the milk. If the problem is
still occurring replace the air suction and test again. If the problem has been solved, order in a spare air
suction (Part no. 71210) otherwise go to step 4.
4. Remove the auto frother from the machine. (Fig 4)
5. Separate the auto frother into 4 parts. (Fig 5)
6. Soak the parts in 250ml of warm water and 15 ml of Cafetto red weekly cleaner (71145) for 30 min.
7. Clean the milk and air paths with the cleaning brush (Part no. 71161) (Fig 6 – 9)
8. Rinse parts under tap water, re-assemble the auto frother and refit onto the machine.
9. Test the milk. If the problem has not been solved and you suspect the steam pressure is low, follow steps -
Troubleshooting: Steam, otherwise contact customer support on 1300 365 487.
Figure 1
Figure 2
Figure 3 – Froth
Figure
Figure 5
Figure 6 - Milk
Figure 7 - Milk
Figure 8 - Air Figure 9 - Milk

My Coffee Shop Pty Ltd
ACN 102 850 037
1473 - 1475 Malvern Rd
Glen Iris VIC 3146
ph: 03 9946 4160
fax: [phone]
93 / 1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: [phone]
Welcome to My Coffee Shop!
Our hours of operation are Monday – Friday 9am to 5pm. Or you can visit us at your
convenience on the web at www.mycoffeeshop.com.au. Orders and service requests can
be placed by:
Phone:
Fax:
E-mail:
Online:
Remittances:
1300 365 487
02 9692 8046
[e-mail]
www.mycoffeeshop.com.au/shop-online
[e-mail]
Service enquiries: [email protected]
Once again, welcome to My Coffee Shop and remember we are here to help. If you have
any questions please don’t hesitate to contact us.
We look forward to exceeding your expectations and making your day easier and more
enjoyable.
Kind regards,
My Coffee Shop
Client Services
My Coffee Shop Pty Ltd
Next business day delivery via Toll Priority to:
Adelaide Canberra Melbourne Sydney
for orders placed by 1.30pm
Please note you will be advised when
ordering if delivery charges apply to your
order