JUWEL Aquarium Lido 120 Product information sheet

EASY INSTALL LIDO 120
1
2.
3.
4.
www.juwel-aquarium.com/step-by-step
Video
Tutorial
1.
Lido 120
Assemble the cabinet if necessary.
Apply JUWEL PosterFix with a cloth to the back of the aquarium and press the desired motif on to the glass. Remove excess poster
material with a sharp cutter knife. The poster may be xed to the back of your aquarium with the help of a spatula using stroking
movements so that the poster adheres to the rear of the aquarium as well as possible.
Material used:
• JUWEL Poster 2 L
• JUWEL PosterFix
• Black Soil
• Scaper’s Wood
• Black Pebbles
• Cryptocoryne albida ‚Brown‘
• Echinodorus tenellus ‚Green‘
• Microsorum pteropus ‚Windelov‘
• Vesicularia dubyana ‚Christmas‘
Spread the substrate around the bottom of your aquarium to cover it, e.g. using a brush.
Black Soil was used in our example.
Set up your aquarium according to the instructions for use.

EASY INSTALL LIDO 120
2
5.
A
D E F
CB
6.
Decorate your aquarium. Place stones, roots or other decorative items in your aquarium.
Then you can start planting your aquarium. Make sure that you expose the roots when
you unpack the plants. Cut the roots a little from below to enable them to develop and
grow faster. Carefully put the plants in place, e.g. with the help of plant tweezers. The
presented planting plan was used in our example.
Scaper’s Wood
Echinodorus
tenellus
‚Green‘
Black Pebbles
Microsorum
pteropus
‚Windelov‘
Cryptocoryne
albida ‚Brown‘
Vesicularia
dubyana
‚Christmas‘
Cover the newly placed elements with paper towels to protect the layout from being washed out. Fill the aquarium slowly with water
up to the level indicator. Remove the paper towels once the aquarium has been lled.
Tip: Fill the aquarium through the lter to ensure optimum lling. This is the gentlest way of lling the aquarium.
Result

EASY INSTALL LIDO 120
3
8.
9.
7.
Install the light unit and connect it to the
power supply. Place the cover hatches
on the lamp to prevent condensation
from escaping.
If necessary, remove the protective film from the filter media and rinse them carefully under running water. Fill the filter baskets
with the filter media as instructed. First insert the lower and then the upper filter basket, with the filter media inserted in the
correct order, into the filter housing. Insert the circulating pump and the heater into the openings provided in the filter. Finally,
place the filter cover on the filter and connect the electrical equipment to the power supply.
The run-in period of the lter may last 6 - 8 weeks. You may increase the number of sh
in steps during this time. Tip: JUWEL bioBoost is able to signicantly cut the run-in
period in your aquarium. Billions of lter bacteria will be immediately activated when
they come into contact with the water and so enable you to take your aquarium into
operation more quickly. bioBoost is available from your specialist dealer.
14 weeks later with CO2
JUWEL accessories
JUWEL bioBoost
Filter accelerator
JUWEL EasyFeed
Automatic feeder
JUWEL OxyPlus
O2 diffuser
JUWEL SmartFeed
Premium automatic feeder
JUWEL AQUARIUM AG & CO. KG | Karl-Göx-Straße 1 | D-27356 Rotenburg/Wümme | GERMANY
Service-Hotline [phone] | Service-Fax [phone] | ser[email protected]
INFO: This set-up video was realised with the help of Adrie Baumann.
Stones and roots: Colorstone | Plants: Tropica Aquarium Plants
www.juwel-aquarium.com