JUWEL Aquarium RIO 125 Product information sheet

EASY INSTALL RIO 125
1
2.
3.
Rio 125
www.juwel-aquarium.com/step-by-step
Video
Tutorial
1.
4.
Assemble the cabinet if necessary.
Apply JUWEL PosterFix with a cloth to the back of the aquarium and press the desired motif on to the glass. Remove excess poster
material with a sharp cutter knife. The poster may be xed to the back of your aquarium with the help of a spatula using stroking
movements so that the poster adheres to the rear of the aquarium as well as possible.
Material used:
• JUWEL Poster 4 L
• JUWEL PosterFix
• White Sand
• Mini Landscape Mix
• Cladophora aegagropila
• Anubias ‚Petite‘
Set up your aquarium according to the instructions for use.
Spread the substrate around the bottom of your aquarium to cover it, e.g. using a brush.
White Sand was used in our example.

EASY INSTALL RIO 125
2
5.
Cladophora
aegagropila
Anubias
‚Petite‘
AB C
6.
7.
Decorate your aquarium. Place stones, roots or other decorative items in your
aquarium. Then you can start planting your aquarium. Make sure that you
expose the roots when you unpack the plants. Cut the roots a little from
below to enable them to develop and grow faster. Carefully put the plants in
place, e.g. with the help of plant tweezers. The presented planting plan was
used in our example.
Result
Cover the newly placed elements with paper towels to protect the layout from being washed out. Fill the aquarium slowly with water
up to the level indicator. Remove the paper towels once the aquarium has been lled.
Tip: Fill the aquarium through the lter to ensure optimum lling. This is the gentlest way of lling the aquarium.
If necessary, remove the protective film from the filter media and rinse them carefully under running water. Fill the filter baskets
with the filter media as instructed. First insert the lower and then the upper filter basket, with the filter media inserted in the
correct order, into the filter housing. Insert the circulating pump and the heater into the openings provided in the filter. Finally,
place the filter cover on the filter and connect the electrical equipment to the power supply.
Mini Landscape Mix

EASY INSTALL RIO 125
3
8.
9.
www.juwel-aquarium.com
Install the light unit and connect it to the
power supply. Place the cover hatches on
the lamp to prevent condensation from
escaping.
The run-in period of the lter may last 6 - 8 weeks. You may increase the number of sh
in steps during this time. Tip: JUWEL bioBoost is able to signicantly cut the run-in
period in your aquarium. Billions of lter bacteria will be immediately activated when
they come into contact with the water and so enable you to take your aquarium into
operation more quickly. bioBoost is available from your specialist dealer.
14 weeks later with CO2
JUWEL Aquarium AG & Co. KG | Karl-Göx-Straße 1 | D-27356 Rotenburg/Wümme | GERMANY
Service-Hotline [phone] | Service-Fax [phone] | ser[email protected]
INFO: This set-up video was realised with the help of Adrie Baumann.
Stones and roots: Colorstone | Plants: Tropica Aquarium Plants
JUWEL accessories
JUWEL bioBoost
Filter accelerator
JUWEL EasyFeed
Automatic feeder
JUWEL OxyPlus
O2 diffuser
JUWEL SmartFeed
Premium automatic feeder