JUWEL Aquarium Primo 110 Datasheet
1
EASY INSTALL PRIMO 110
2.
3.
1.
Primo 110
www.juwel-aquarium.com/step-by-step
Video
Tutorial
Assemble the cabinet if necessary.
Apply JUWEL PosterFix with a cloth to the back of the aquarium and press the desired motif on to the glass. Remove excess poster
material with a sharp cutter knife. The poster may be fixed to the back of your aquarium with the help of a spatula using stroking
movements so that the poster adheres to the rear of the aquarium as well as possible.
Material used:
• JUWEL Poster 2 L
• JUWEL PosterFix
• Black Soil
• Seiryu Stone
• Red Moor Wood
• Anubias barteri var. Nana
• Cryptocoryne beckettii ‚Petchii‘
• Bacopa ‚Compact‘
• Hygrophila ‚Siamensis 53B‘
Set up your aquarium according to the instructions for use.
2
EASY INSTALL PRIMO 110
6.
5.
A
E
C
B
F
D
Seiryu Stone
Bacopa
‚Compact‘
Red Moor
Wood
Hygrophila
‚Siamensis 53B‘
Anubias barteri
var. Nana
Cryptocoryne
beckettii ‚Petchii‘
4.
Cover the newly placed elements with paper towels to protect the layout from being washed out. Fill the aquarium slowly with
water up to the level indicator. Remove the paper towels once the aquarium has been lled.
Tip: Fill the aquarium through the lter to ensure optimum lling. This is the gentlest way of lling the aquarium.
Decorate your aquarium. Place stones, roots or other decorative
items in your aquarium. Then you can start planting your aquarium.
Make sure that you expose the roots when you unpack the plants.
Cut the roots a little from below to enable them to develop and
grow faster. Carefully put the plants in place, e.g. with the help of
plant tweezers. The presented planting plan was used in our
example.
Spread the substrate around the bottom of your aquarium to cover it, e.g. using a brush. Black Soil was used in our example.
Result
3
EASY INSTALL PRIMO 110
8.
9.
7.
Install the cover with integrated NovoLux LED lamp and connect it to the power
supply. Tip: The Primo 110 aquarium cover allows you to use up to three more
NovoLux LED lamps to increase the lighting or to create special colour effects in the
aquarium.
The run-in period of the lter may last 6 - 8 weeks. You may increase the number of sh
in steps during this time. Tip: JUWEL bioBoost is able to signicantly cut the run-in
period in your aquarium. Billions of lter bacteria will be immediately activated when
they come into contact with the water and so enable you to take your aquarium into
operation more quickly. bioBoost is available from your specialist dealer.
If necessary, remove the protective lm from the lter media and rinse them carefully under running water. Fill the lter baskets with
the lter media as instructed. Place the lter basket, with the lter media inserted in the correct order, into the lter housing. Connect
the circulating pump and the heater to the power supply.
JUWEL AQUARIUM AG & CO. KG | Karl-Göx-Straße 1 | D-27356 Rotenburg/Wümme | GERMANY
INFO: This set-up video was realised with the help of Adrie Baumann.
Stones and roots: Colorstone | Plants: Tropica Aquarium Plants
www.juwel-aquarium.com
JUWEL accessories
14 weeks later with CO2
JUWEL bioBoost
Filter accelerator
JUWEL EasyFeed
Automatic feeder
JUWEL OxyPlus
O2 diffuser
JUWEL SmartFeed
Premium automatic feeder
Table of contents
Other JUWEL Aquarium Other manuals
