JVC KD-A315 User manual

.Ive
ENGLISH
ESPANOL
FRANC;:AIS
..
..
..
KD-A315/KD-R310
CD RECEIVER /RECEPTOR CON CD /
RECEPTEUR CD
IffOi
C~~~)
REA 0 Y
H3' Radio
e
'!IREADY
rum~i
DIGITAL AUDIO
ITEXT I
MP3
WMA
For canceling the display demonstration, see page 4. / Para cancelar la demostraci6n en pantalla,
consulte la pagina 4. / Pour annuler la demonstration des affichages, referez-vous a la page 4.
GET0626-001A
[J]
l Serial No.
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom ofthe cabinet.
Retain this information
i for future reference.
IModel No.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'/NSTRUCTIONS
For installation and connections, refer to the separate manual.~,~1
Para la instalaci6n y las conexiones, refierase al manual separado.
Pour I'installation et les raccordements, se referer au manuel separe.
L- ~
All manuals and user guides at all-guides.com
all-guides.com

..
INFORMA nON (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class Bdigital device,
pursuant to Part 1S of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, ifnot installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not
occur in aparticular installation. If this equipment does cause harmful
interference to
radio or television reception, which can be determined by turning the equipment
off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on acircuit different from that to which the receiver is
connected.
::::,,~~Jnsult the deale: or an experienced radiofTV technician for ~~p~ _
Caution:
Changes or modifications not approved by JVC could void the user's authority to operate the
equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3.CAUTION: (For USA) Visible and/or invisible class II laser radiation when open. Do not stare
into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not
view directly with optical instruments.
4. REPRODUCTION OF LABEL CAUTION LABEL, PLACED OUTSIDE THE UNIT.
CAUTION ATTENTION
AVISO VARNING
a. CAUTION
VlSI8LE AND/OR RAYOHNENENT LASER RADIACION LASER SYNUG OCH I EllER ::fl!!(tiiJll VISIBLE AND I OR
INVISIBLE CLASS 1 hi VISIBlE ET I au DE ClASE 1M OSYNUG
llJllt:t1=Fi111
INVISIBLE ClASS U
lASER RADIATION INVISIBlE DE ClASSE
~06f~~~S'BLE
LASERSTRkNING, 11J?7A1M lASEll RADIATION
WHEN OPEN. 00 HOT ,M UNE FatS OtNERT. KLASS 1M, NAR OENNA.
.... --If-IUIb<
WHEN OPEN.
VIEW DIRECTlY WITH HE PAS REGARDER ABIEflTO. NO MIRAft en .ill OPPHAD.
lIlJT. 00
NOT STARE
OPT1CAl ItSTRUMEHTS. DIRfCTEIolENT AVEC DIRECTAMENTE BETRAKTA EJ
~'.Inll
"'" llE.\M.
IEC6082S-1:2OD1 DES lNSTIlUMENTS CON INSTIl.UMEHTAl STRA1.fH NED CFTIS<A
.lfJ:l
l
1!(t:iH'.
RlA ~ ""
/ENG)
OPnOUES. (FRA)
0Fn00. 1'Sf!
lNSTJUlENT. lSWE)
"'"
/ENG)
[European Union only]
Warning:
If you need to operate the unit while driving,
be sure to look around carefully or you may be
involved in atraffic accident
For safety...
. Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
.
Stop the car before performing any
complicated operations.
Temperature inside the car ...
If you have parked the car for along time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating
the unit.
2
ENGLISH
All manuals and user guides at all-guides.com

Thank you for purchasing a JVC product.
Please read all instructions carefully before
operation, to ensure your complete
understanding
and to obtain the best possible ..
performance from the unit.
CONTENTS
3 How to read this manual
3 How to attach/detach the control
panel
3 How to reset your unit
3
How to forcibly eject a disc
4Canceling the display
demonstration
4Setting the clock
5Preparing the remote controller
6Basic operations
7Listening to the radio
8Listening to adisc
lOUsing Bluetooth· devices
11 Using aBluetooth mobile phone
13 Using aBluetooth audio player
15 Listening to the HD Radio-
Broadcast
16 Listening to the satellite radio
18.Listening to the otherexternal
components
19 Selecting apreset sound mode
20 Menuoperations
25 Titleassignment
26 More about thiS unit
. 29· Maintenance'
3O'.T~~lil~bootWg
3;4. SpecifitatIDns .
.
Turn the control dial
to make a selection,
then press to confirm.
Press and hold the button(s)
until the
desired operation
begins.
Turn the control dial.
Menu setting item
Continued on the next
page
Reference page number
~[HOldl
Howto read this manual
The following icons/symbols are used to
indicate:
<xxxx>
How to forcibly eject adisc
+ ~[HOldl
How to reset your unit
Your preset adjustments
will
also be erased (except
the registered Bluetooth
device). (~ 10)
How to attach/detach the control
panel
• You can forcibly eject the loaded disc even
if the disc is locked. To lock/unlock the disc,
~8
• Be careful not to drop the disc when it ejects.
•If this does not work, reset your unit.
ENGLISH I3
All manuals and user guides at all-guides.com

Canceling the display demonstration
•1 Turn on the power.
@/~
2
~[HOldJ
I
·'OFiMO
(Initial setting)
3
CCb
I
DEMO ON
Setting the clock
1 Turn on the power.
@?/~
4Select <DEMO OFF>.
@I DEMoDFF I
5~1 DEMO I
6Finish the procedure.
So
2 ~[HOldJ 1..dElvTo
(Initial setting)
3Select <CLOCK>.
@) ~CLfJC~'K~' I •
4Select <CLOCK SET>.
o '---1 C-'LOC-'J(-sa-I •
5Adjust the hour.
e ~~~t~l.
~ I CLOCKS~ I
~
~
6Adjust the minute.
~ ~~~~~I. ~ I CLOGKSET I
7Finish the procedure.
80
4I ENGLISH
All manuals and user guides at all-guides.com

Preparing the remote controller
When you use the remote controller for the first
time, pull out the insulation
sheet.
~
Insulation sheet
For USA-California Only:
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material-
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate
If the effectiveness ofthe remote controller
decreases, replace the battery.
Replacing the
lithium coin battery
~(j;25
~,
Caution:
. Danger ofexplosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
•
Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Warning (to prevent accidents and
damage):
· Do not install any battery other than CR2025
or its equivalent.
•
Do not leave the remote controller in a place
(such as dashboards) exposed to direct
sunlight for along time.
·
Store the battery in a place where children
cannot
reach.
• Do not recharge, short, disassemble, heat the
battery,
or dispose ofit in a fire.
• Do not leave the battery with other metallic
materials.
· Do not poke the battery with tweezers or
similar tools.
· Wrap the battery with tape and insulate when
throwing
away or saving it.
KD-A315 is equipped with the steering wheel
remote control function.
Before operating, connect an exclusive remote
adapter (not supplied) which
matches your car
to the steering wheel remote input terminal on
the rear ofthe unit.
·
For details, refer also to the instructions
supplied with the remote adapter.
..
ENGLISH I5
All manuals and user guides at all-guides.com

..
Basic operations
Detaches the panel
When you press or hold the following button(s) ...
Remote
Main unit General operation
controller
•
<!J/1/ATI
e
'101. - '101. +
Turns on.
• When the power is on, pressing <!)/IIATI on the remote controller
also mutes the sound or pauses. Press <!)/I/ATI again to cancel
mutin or resume pia back.
Turns offif pressed and held.
Selects the available sources (if the power is turned on).
•If the source is ready, playback also starts .
Adjusts the volume level.
Selects items.
6 ENGLISH
• Mutes the sound during playback. If the source is 'CD: playback
pauses. Press the control dial again to cancel muting or resume
playback.
• Confirms selection.
Selects the sound mode.
• Enters tone level adjustm~nt directly (~ 19) if pressed and held
EQ IlASS-TRE on the main unit.
• Enters <COlOR> setting directly (~22).
• Enters <COLOR SETUP> settin directl (~22) if ressed and held.
Returns to the previous menu.
Power off : Checks the current clock time.
Power on : Chan es the dis la information.
All manuals and user guides at all-guides.com
all-guides.com

Listening to the radio
••
c:? "FM" or "AM"
•
"ST" lights up when receiving an FM stereo broadcast with sufficient signal strength.
Manual search
"M" flashes, then press
the button repeatedly.
Automaticpresetting (FM)-
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station ...
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
When an FM stereo broadcast is
hard to receive
c:? <TUNER> c:? <SSM> c:?
<SSM 01 - 06> / <SSM 07 - 12> /
<SSM 13 -18>
"SSM" flashes and local stations with
the strongest
signal are searched and
stored automatically.
2
1 ~[HOldJ
To preset another6stations, repeat the
above procedure by selecting one ofthe other
6
SSM setting ranges.
[Hold]
c:? <TUNER> c:? <MONO> c:?
<MONO ON>
Reception improves, but stereo effect
will
be lost.
2
1
Changing the display information
Station name" -+ Frequency-+
Clock
-+ (back to the beginning)
"If no title is assigned to a station, HNO NAME
H
appears for a few seconds. To assign atitle to a
station, ~25.
If an HD Radio tuner box is connected (~ 15),
you can also search and store 6 stations for AM
by following the above operations.
~
ENGLISH I7
All manuals and user guides at all-guides.com

Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number "04."
1 E9b
or
Selecting apreset station
J
~) .... , ,"':,""
/ ""''Vi'
, " '-- ...... _.It
............
1
•
¢ "92.50MHz"
2 ~[HOldl
"PRESET MODE" flashes
Using the remote controller
--~1---------------------
tl .... u/o ... . Changes the preset
<R"""" ". stations
~ ~~ S""h~ fm ,"';om
¢ Selects preset number "04."
"P04" flashes and "MEMORY" appears.
Selects folder ofthe MP3/wMA
J~
" ... ,J'" .-
:' . 'l,l .. v"" ...... ~ ... ·... Selects track
...........
Fast-forwards or
reverses the track
All tracks will be played repeatedly until you
change the source or eject the disc.
Prohibiting disc ejection
•+ l'\ ~[HOldJ
Stopping playback and ejecting
the disc
[~S() "NO DISC" appears.
Press <!>/SOURCE to listen to
another
playback source.
To cancel the prohibition, repeat the same
procedure.
8I ENGLISH
All manuals and user guides at all-guides.com

Selecting the playback modes
You can use only one of the following playback
modes
at atime.
Selecting atrack/folder
180
For MP3IWMA discs, select the desired folder,
then the
desired track by repeating step 2.
• To return to the previous menu, press BACK.
1
~[HOld]
¢"REPEAT"'" "RANDOM"
•
Changing the display information
Disc title/Album name/performer (folder
name)' --+ Track title (file name)' --+ Current
track number with the elapsed playing time
--+ Current track number with the clock
time
--+ (back to the beginning)
•If
the current disc is an audio CD, "NO NAME"
appears.
If an MP3/wMA file does not have Tag
information or <TAG DISPLAY> is set to
<TAG OFF> (~21), folder name and file name
appear.
Caution on volume setting:
Discs produce very little noise compared
with other
sources. Lower the volume before
playing a
disc to avoid damaging the speakers
by the sudden increase ofthe output level.
REPEAT
TRACK RPT : Repeats current track
FOLDER RPT : Repeats current folder
RANDOM
FOLDER RND: Randomly plays all tracks
of current folder, then
tracks ofnext folders
ALL RND : Randomly plays all tracks
To cancel repeat play or random play, select
"RPT OFF" or "RND OFF."
Using the remote controller
... UfO ... : Selects folder ofthe
~'
L L_-"'- __ M_P_31W-:--M_A _
•r.... RfF ~ : Selects track
.... RfF ~ : Fast-forwards or
(Hold] reverses the track
ENGLISH I9
All manuals and user guides at all-guides.com

Using Bluetooth®devices
~ "BT-PHONE" or "BT-AUDIO"
~ "NEW DEVICE" ~ "OPEN"
2
1
Registering using "OPEN"
Preparation: Operate the device to turn on its
Bluetooth function.
For Bluetooth operations, it is required to
connect the Bluetooth
adapter, KS-BTA200 (not
supplied) to the
expansion port on the rear of
this unit
•
Refer to pages i and ii at the end of the
manual to check the countries where you
may use the BluetoothO function.
•
For details, refer also to the instructions
supplied with
the Bluetooth adapter and the
Bluetooth
device.
•
To use aBluetooth device through the unit
("BT-PHONE" and "BT-AUDIO") for the first time,
you need to establish aBluetooth wireless
connection between the unit and the device.
• Once the connection is established, it is
registered on the unit even if you reset your
unit
Up to five devices can be registered in
total.
·
Only one device can be connected at atime
for each source ("BT-PHONE" and "BT-AUDIO").
3
~ Enter a PIN (Personal Identification
Number) code in to the unit
You can enter any number you like
(l-digit to 16-digit number).
[Initial: OOOO}
• Some devices have their own PIN
code. Enter the specified PIN code in
to the unit
6 Use the Bluetooth device to search and
connect
On the device to be connected, enter
the
same PIN code you have just
entered
for this unit "CONNECTED"
appears.
Now connection is established and you
can use the device through the unit
Registration (Pairing) methods
Use either ofthe following items ("OPEN" or
"SEARCH" ) in the Bluetooth menu to register
and make the unit ready to establish a new
Bluetooth connection with a device.
"OPEN" Connection is established by
operating the Bluetooth device.
"SEARCH": Connection is established by
operating the unit
4
5
Repeat step 3until you have finished
entering the PIN code.
"OPEN .. " flashes.
The device remains registered even after you
disconnect the device. Use "CONNECT" (or
activate "AUTO CNNCT") to connect the same
device from next time on. (~ 11,14)
10 I ENGLISH
All manuals and user guides at all-guides.com

..
<=> Select adevice you want to
connect/disconnect/delete.
'J~)''''''.o .§o. •
" 'I/Y''j''tt..
, ,
,.
','
<=> "CONNECT" or "DISCONNECT": To
connect/disconnect the selected device
-----
or -----
<=> "DELETE" <=> "YES" : To delete the
selected device
3
c:::> Bluetooth menu
2
1
,§/~
<=> "BT-PHONE" or "BT-AUDIO"
•
UsingaBluetooth
mobile
phone
.A?!~
<=> "BT -PHONE"
•
Make a call or setting using
the Bluetooth setting menu.
l.-.---Jl~nl
You can set the unit to connect the Bluetooth
device automatically when the unit
is turned
on. ("AUTO CNNCT," If! 14)
Connecting/disconnecting/
deleting aregistered device
<=> Select adevice you want to connect.
For available devices ...
<=> Enter the specific PIN code ofthe
device to the unit.
•
Refer to the instructions supplied with
the device to
check the PIN code.
Use the Bluetooth device to connect.
Now connection
is established and you
can use the device through the unit.
For special device ...
Use "OPEN" or "SEARCH" to connect.
-----
or -----
<=> "SPECIAL": To connect a special
device
The unit displays the list ofthe preset
devices.
<=> "SEARCH" : To search for available
devices
The unit searches and displays the list
ofthe
available devices. "UNFOUND"
appears if no available device is
detected.
5
2
4
3
1 ,f~
<=> "BT-PHONE" or "BT-AUDIO"
Registering adevice
("SEARCH" I"SPECIAL")
~
ENGLISH I 11
All manuals and user guides at all-guides.com
all-guides.com

q Select "DIAL" menu.
q Enter aphone number.
For PHONE BOOK
q Repeat step 4to select a name or a
phone
number.
q Select a calling method.
PHONE BOOK* .... MISSED* ....
NUMBER VOICE DIAL ....
REDIAL * RECEIVED* (back to
the beginning)
----------
For REDIAL, RECEIVED, MISSED
q Repeat step 4to select a name (if it is
acquired) or aphone number.
5
4
3
When atext message comes in....
If the mobile phone is compatible with text
message (notified through JVC Bluetooth
adapter) and "MSG INFO" (message info) is
set to "AUTOMATIC (~ 14), the unit rings to
inform
you ofthe message arrival.
• "RCV MESSAGE" (receiving message) appears
and the display illuminate in blue. «RING
COLOR>, ~ 22)
When acall comes in....
The source is automatically changed to
"BT-PHONE."
• The display will flash in blue. «RING COLOR>,
t!J 22)
When II AUTO ANSWER
II
is activated ....
The unit answers the incoming calls
automatically. (~ 14)
• When "AUTO ANSWER" is deactivated, press
any button (except <9 /SOURCE I ~ / ~) to
answer the incoming call.
• You can adjust the microphone volume level.
((214)
To end the call
Hold any button (except <9 /SOURCE I ~ I ~).
•
¢ Confirm.
q "BT-PHONE"
Usingthe remote controller
Making acall
l~
* Displays only when your mobile phone is
equipped with these functions and is compotibh
with
this unit.
For VOICE DIAL
q Speak the name you want to call
when "SAY NAME" appears.
• If your mobile phone does not support
the
voice recognition system, "ERROR"
appears.
• Using voice tags may be difficult in
a noisy environment or during an
emergency.
•
To return to the previous menu, press ...
.. U/D ...I: Rejects calls
~ R/F ~ /SOURCE
I[Hold]
I .. U/D .../: Answers calls
~ R/F ~ /SOURCE
2
12 I ENGLISH
All manuals and user guides at all-guides.com

..
•
I''''Z)
c? Bluetooth menu
c? Change the setting accordingly. For
setting menu, ctJ 14.
~·~b·
c? "SETIINGS"
J",-", b.
',,,,",""- '.-
l .,{ Nill --', -~.Ai. .--
, ,
v
c? Select asetting item.
AUTO CNNCT - AUTO ANSWER*I
- MSG INFO*2 - MIC SETIING*I
-
VERSION*3 - (back to the
beginning)
4
3
2
5
Changing the Bluetooth settings
1 §~:J()
c? "BT-PHONE" or "BT-AUDIO"
Reverse skips/forward
skips
Using aBluetooth audio
player
c? "BT-AUDIO"
If playback does not start, operate the
Bluetooth audio
player to start playback.
Operate the Bluetqoth audio player to
pause (if playback does not pause when you
change the source).
.. "'-: ..... __ -..~
. Pauses/starts playback*
* Operation may be different
according to the connected
Bluetooth oudio player.
-;::::::;;::;-:::---~~---
Enter setting menu (Device
list)
For conneetingldisconnecting/deleting a
registered device, ctJ 11.
Using the remote controller
.... R/F ~ : Reverse skips/forward
skips
*1 Appears only when a Bluetooth phone is
connected.
*2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message (notified through JVC Bluetooth
adapter).
*3 Bluetooth Audio' Shows only 'Version."
~
ENGLISH I 13
All manuals and user guides at all-guides.com

•Setting menu (_ :Initial)
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with ...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth
device found at first.
AUTO ANSWER
Only for the device being connected for
"BT PHONE."
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls
manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for
"BT-PHONE."
AUTOMATIC: The unit informs you ofthe
arrival ofa message by ringing
and displaying "RCV MESSAGE"
(receiving message) .
•
The display illuminate in blue.
«RING COLOR>, ~ 22)
MANUAL: The unit does not inform you of
the
arrival ofa message.
MIC SETTING (microphone setting)
Only for the device being connected for
"BT-PHONE." Adjust microphone volume
connected to the Bluetooth
adapter,
[LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions
are shown.
IW.
Iarnlng messages
I ERROR CNNCT (Error Connection) .
I The device is registered but the connection
I has failed. Use "CONNECT" to connect the
I device again. (~ 11)
I ERROR
I Try the operation again. If "ERROR" appears
I
II again, check ifthe device supports the
Ifunction you have tried.
I UNFOUND
No available Bluetooth device is detected
by "SEARCH."
I LOADING*
I The unit is updating the phone book. I
PLEASE WAIT I
The unit is preparing to use the Blu~tooth
function. If the message does not disappear,
II turn off and turn on the unit, the.n connect
the
device again (or reset the unit).
I RESET 8
Check the connection between the adapter
and this unit.
* Displays only when your mobile phone I
is equipped with these functions and is I
L...::c:..:o.:..:..m:r.p.::a:.:.:tib:..:.le:...:.-:...:..::with~th-:.:::is~u_n_it. .-J
Bluetooth Information:
If you wish to receive more information
about
Bluetooth, visit .the following JVC web
site: <http://www.jvc.co.jp/englishl ca r I>
(English website o_n.....:.ly.:.....) _
14 I ENGLISH
All manuals and user guides at all-guides.com

Listening to the HD Radio™Broadcast
Before operating, connect HD Radio tuner box,
KT-HD300 (not supplied) to the expansion port
on the rear of the unit.
•
For details, refer also to the instructions
supplied with the HD Radio tuner box.
Select your desired channel.
HOl H02 H08
.... (back to the beginning)
..
What is HD Radio Technology?
HD Radio Technology can deliver high-quality
digital
sound-AM digital will have FM-Iike
quality (in stereo) and FM digital will have
CD-like quality-with static-free and clear
reception. Furthermore, stations can offer text
and data, such as artist names and song titles.
• When the HD Radio tuner box is connected,
it
can also receive conventional analog
broadcasts.
• Many HD Radio stations also offer more than
one channel ofprogramming. This seNice is
called multicasting
•
To find HD Radio stations in your area, visit
<http://www.hdradio.com/>.
For basic radio operations, til 7, 8.
"LINKING' appears while linking to amulticast
channel.
Searching for HD Radio stations
only
"HD" flashes.
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically
due to the receiving condition.
While listening to an HD Radio station ...
Station Call Sign appears.
First four letters of Call Sign
2
1
¢ <TUNER> ¢ <BLEND HOLD> ¢
<AUTO> / <DIGITAL> / <ANALOG>
"HD" lights up when holding the digital
reception
or flashes when holding the
analog reception.
•
If no sound can be heard with <AUTO>,
change the setting to <ANALOG> or
<DIGITAL> .
•
The setting automatically changes to <AUTO>
if you tune in to or change to another station,
or if you turn off the power.
When receiving...
An HD Radio station
Lights up when digital audio is broadcast
Flashes when analog audio is broadcast
•
HD Radio multicast channels
ID>
ENGLISH I 15
All manuals and user guides at all-guides.com

• This setting cannot take effect for the
conventional
FM/ AM stations.
• If the radio station forces the reception mode
•to digital, the
HOLD indicator flashes.
Usingthe remote controller
I -----
I ... U/D ... : Changes the preset
L stations
i .... R/F ~ : Searches for stations
I _
Changing the display information
Call Sign*l --. Frequency--'
Title/artist/album
name ofthe
current
segment*2 --. Clock--'
(back to the beginning)
*1 "**** -FM" or" ****" appears when no Caff Sign
is received.
*2 "NO TEXT" appears when no text is received.
Listening to the satellite radio
Before operating, connect either one of
the following
systems (not supplied) to the
expansion port on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SC -Cl and KS-SRA 100
• PnP, SC-VDOCl and KS-SRA 100
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVCl 00)
• CNP2000UC and CNPJVCl
• For details, refer also to the instructions
supplied with the other components.
GCI (Global Control Information)
update
• If channels are updated after subscription,
updating
starts automatically. "UPDATING"
flashes and no sound can be heard.
• Update takes a few minutes to complete.
•During
update, you cannot operate your
satellite radio.
16 I ENGLISH
o~
q "SIRIUS" or "XM"
•q
Select a category.
SIRIUS: jf you select "ALL," you can
tune in to all the channels of all
categories.
All manuals and user guides at all-guides.com
all-guides.com

Activate your SIRIUS subscription after
connection
l@l~
~"SIRIUS"
SIRIUS Satellite radio starts updating all
the SIRIUS channels. Once completed,
SIRIUS Satellite radio tunes in to the
preset channel, CH 184.
Storing channels in memory
You can preset up to 18 channels for both
SIRIUS and XM.
Ex.: Storing channel into preset number "04."
1 Tune in to achannel you want to store.
(Steps 0- .,~ 16)
2~
•
~ Select preset number "04."
Selecting SIRIUS/XM preset
station
4 ~[HOld]
"P04" fiashes
1
3Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription,
or you can
call SIRIUS toll-free at 1-888-539-SIRIUS
(7474) .
•
"SUB UPDT PRESS ANY KEY" scrolls on
the display once subscription has been
completed.
2 Check your SIRIUS ID. (~21)
Activate your XM subscription after
connection
•Only Channel 0, 1, and 247 are available
before activation.
Checking the satellite radio ID
While selecting "SIRIUS" or "XM" ...
~ Select "Channel 0."
SIRIUS: SIRIUS identification number is
displayed after "Channel 0" is selected.
XM: The display alternately shows "RADIO ID"
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than "Channel 0."
1 @/SOU~
~"XM"
XMDirect'MTuner Box or XMDirect2
Tuner System starts updating all the
XM channels. "Channell" is tuned in
automatically.
2 Check your XM Satellite radio ID labelled
on the casing ofthe XMDirect'M Tuner
Box or XMDirect2 Tuner System, or tune
in to "Channel 0". (~right column)
3Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription,
or you can call1-800-XM-
RADIO (1-800-967-2346)
• Once completed, the unit tunes in to
one ofthe
available channels (Channel
4 or higher).
2
~
ENGLISH I17
All manuals and user guides at all-guides.com

•Usingthe remote controller
I ~ u/o ~ : Changes the
categories
...... R/F~ : Changes the channels
...... R/F ~ : Changes the channels
__ ~[HOld] rapidly
Changing the display information
~ Category name -+ Channel name
DISP V -+ Artist name -+ Composer
name* -+ Song/program name/
title -+ Clock -+ (back to the
beginning)
* Only for SIRIUS Sotellite radio.
Listening to the other external
components
You can connect an external component to:
· EXT INPUT: Expansion port on the rear of
this unit using the following adapters (not
supplied):
-KS-U57, Line Input Adapter
-KS-U58, AUX Input Adapter
Preparation: Make sure <EXT ON> is selected
for the <SRC SELECT> -+ <EXT IN> setting.
(t!J 24)
· AUX IN: AUX (auxiliary) input jack on the
control
panel.
Preparation: Make sure <AUX ON> is
selected for the <SRC SELECT> -+ <AUX IN>
setting. (~24)
• For details, refer also to the instructions
supplied with the adapter
or external
components.
q "EXT INPUT' or "AUX IN"
Connecting an external component to the A UX input .jack
__ ~AOX(@~.J. ...
:=. -:=== . .... J) ~ j 3.5 mm (3/16//) stereo mini
plug (not supplied)
Portable audio player,
etc.
18 I ENGLISH
All manuals and user guides at all-guides.com

Selecting apreset sound mode
FLAT -+ NATURAL -+ DYNAMIC -+ VOCAL
BOOST -+ BASS BOOST -+ USER -+ (back to
the beginning) 2
•
Adjust the sound elements ofthe
selected tone. (~table on the left)
~ <PRO EQ> ~ <BASS> / <MIDDLE> /
<TREBLE>
4 Repeat steps 2 and 3to adjust other
tones.
The adjustments made will be stored
automatically in "USER:
3
1
Storingyour own sound mode
You can store your own adjustments in
memory.
[Holdl
Adjust the level (-06 to +06) of the
selected tone (BASS / MIDDLE / TREBLE).
The sound mode is automatically stored
and changed to "USER:
1
You can select a preset sound mode suitable
for the
music genre.
~
8AS~~TR~
While listening, you can adjust the tone level of
the selected sound mode.
Tone Sound element
Frequency Level Q
BASS 60 Hz
-06 to +06 Q1.0
80 Hz
Q125
100 Hz Ql.5
200 Hz
Q2.0
MIDDLE 0.5 kHz
-06to +06 QO.75
1.0 kHz
Q1.0
1.5 kHz Q1.25
2.5 kHz
TREBLE 10.0 kHz
-06 to +06
QFIX
12.5 kHz
15.0 kHz
17.5 kHz
The current sound mode changes to "USER"
automatically.
ENGLISH I 19
All manuals and user guides at all-guides.com

Menu operations
•1
~[HOldJ
3 Repeat step 2if necessary.
. To return to the previous menu,
press BACK
. To exit from the menu, press DISP
or MENU.
Category Menu item Selectable setting, [Initial:
Underlined]
- -
DEMO
• DEMO ON
: Display demonstration will be activated
0
Display automatically if no operation is done for about
::E
wdemonstration
20 seconds. (t!J 4)
0·
DEMOOFF
: Cancels.
-
CLOCK SET
-:
Adjust the hour, then the minute. ((24)
Clock setting [1 :001
ClOCKADJ*\ .AUTO :
The built-in clock is automatically adjusted using
Clock the clock data provided via the satellite radio
adjustment channel.
· OFF
: Cancels.
--
:.::
TIME ZONE *1, *2
EASTERN,
: Select your residential area from one of the time
u
ATLANTIC, zones for clock adjustment.
0
...J
NEWFOUND,
u
ALASKA,
PACIFIC,
MOUNTAIN,
CENTRAL
f---
-------------- -
----
DST*I, *2 ·
DSTON
: Activates daylight savings time if your residential
Daylight savings area is subject to DST.
time ·
DSTOFF
: Cancels.
-
BASS -:
For settings, t!J 19.
0
w
0
MIDDLE
a:
0..
TREBLE
----
-
*1 Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.
*2 Displayed only when <CLOCK AD» is set to <AUTO>.
20 I ENGLISH
All manuals and user guides at all-guides.com