JVC KD-AVX2 - DVD Player With LCD Monitor User manual

ENGLISHESPAÑOL
FRANÇAIS
DVD/CD RECEIVER KD-AVX2
RECEPTOR CON DVD/CD
KD-AVX2
RÉCEPTEUR DVD/CD
KD-AVX2
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information for
future reference.
Model No.
Serial No.
LVT1454-001A
[J]
SRC D
MENU
7/ BACK
KD-AVX2
DISP
A
ENTBAND
MODE MENU ASPECT
ZOOM
ATT
SOURCE
DISC+
DISC–
DVD / RECEIVER CONTROL
EXTRA MONITOR CONTROL
+10
–10
123
456
78
0
9
–100
BAND
OSD
MENUTOP M
SETUP
RM-RK240
RETURN
ENTER
DUAL
SHIFT
VOL
2nd VOL
+100
DIRECT
ASPECT
SURROUND
ASPECT
For canceling the display demonstration, see page 10.
Para cancelar la demonstración en pantalla, consulte la página 10.
Pour annuler la démonstration des affichages, référez-vous à la page 10.
AVX2EN_book.indb 2AVX2EN_book.indb 2 06.1.25 6:19:12 PM06.1.25 6:19:12 PM

2
ENGLISH
How to forcibly eject a disc
If a disc cannot be recognized by the receiver
or cannot be ejected, ejects the disc as
follows.
“NO EJECT?” (or “EJECT OK?”) and
“EMERGENCY EJECT?” appear on the
monitor.
Press 5/ ∞repeatedly to select
“EMERGENCY EJECT?”, then press ENT.
• If this does not work, reset your receiver.
• Be careful not to drop the disc when it ejects.
How to reset your unit
This will reset the
microcomputer. Your preset
adjustments will also be
erased.
Thank you for purchasing a JVC product.
Please read all instructions carefully
before operation, to ensure your complete
understanding and to obtain the best possible
performance from the unit.
INFORMATION (For U.S.A.)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.
For safety....
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover.
There are no user serviceable parts inside
the unit; leave all servicing to qualified
service personnel.
3. CAUTION: Visible and invisible laser
radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
Caution:
Changes or modifications not approved
by JVC could void the user’s authority to
operate the equipment.
AVX2EN_book.indb 2AVX2EN_book.indb 2 06.1.25 6:19:44 PM06.1.25 6:19:44 PM

3
ENGLISH
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
Cautions on the monitor:
• The monitor built in this receiver has
been produced with high precision, but
it may have some ineffective dots. This is
inevitable and is not malfunction.
• Do not expose the monitor to direct
sunlight.
WARNINGS:
• DO NOT install any receiver in locations
where;
– it may obstruct the steering wheel and
gearshift lever operations, as this may
result in a traffic accident.
– it may obstruct the operation of safety
devices such as air bags, as this may
result in a fatal accident.
– it may obstruct visibility.
• DO NOT operate any receiver while
manipulating the steering wheel, as this
may result in a traffic accident.
• The driver must not watch the monitor
while driving.
If the driver watches the monitor while
driving, it may lead to carelessness and
cause an accident.
• The driver must not put on the headphones
while driving. It is dangerous to shut off the
outside sounds while driving.
• If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.
• If the parking brake is not engaged,
“Parking Brake” flashes on the monitor,
and no playback picture will be shown.
– This warning appears only when the
parking brake wire is connected to the
parking brake system built in the car
(refer to the Installation/Connection
Manual).
This product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Macrovision, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
Characters shown on the monitor
The following characters will be used
to show the various information on the
monitor.
• You can also use the following characters
to assign titles (see page 41).
space
space space
Upper and lower cases
Numbers and symbols
AVX2EN_book.indb 3AVX2EN_book.indb 306.1.25 6:19:44 PM06.1.25 6:19:44 PM

4
ENGLISH
Discs you can play
You can play back the following discs—12 cm
(4-3/4") and 8 cm (3-3/16")—on this receiver:
• DVD Video: Recorded in NTSC color system
with Region Code “1” (see below).
– DVD-R/DVD-RW recorded in the DVD-
Video format can also be played.
• DVD Audio
• Video CD (VCD)/audio CD
• MP3/WMA/WAV/JPEG/MPEG1,2: Recorded
either in CD-R/CD-RW or DVD-R/DVD-
RW/+R/+RW/DVD-ROM.
– CD-R/CD-RW: Compliant with ISO 9660
Level 1, ISO 9660 Level 2, Romeo, and
Joliet.
– DVD-R/DVD-RW/+R/+RW/DVD-ROM:
Compliant with UDF-Bridge Format*1.
• It is possible to play back finalized +R/+RW
(DVD Video format only) discs. However the
use of +R double layer disc on this unit is not
recommended.
• DVD-R recorded in multi-border format is
also playable (except for dual layer discs).
On some discs, the actual operations may be
different from what is explained in this manual.
Note on Region Code:
DVD players and DVD Video discs have
their own Region Code numbers. This
receiver can only play back DVD discs whose
Region Code numbers include “1”.
Examples:
If you insert a DVD Video disc of an
incorrect Region Code
“Region Error” appears on the monitor on
the unit and the disc ejects.
“REGION CODE ERROR” also appears on
the external monitor.
Discs cannot be played back
DVD-ROM (data), DVD-RAM, DVD-R/DVD-
RW recorded in the DVD-VR format, CD-
ROM, CD-I (CD-I Ready), Photo CD, etc.
• Playing back these discs will generate noise
and damage the speakers.
Caution for DualDisc playback
• The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.
*1A hybrid file system used to provide
compatibility with ISO 9660 for accessing
any type of files on the disc. (UDF stands for
Universal Disk Format.)
“DVD Logo” is a trademark of DVD Format/
Logo Licensing Corporation registered in the US,
Japan and other countries.
Introduction—Playable discs
AVX2EN_book.indb 4AVX2EN_book.indb 4 06.1.25 6:19:45 PM06.1.25 6:19:45 PM

5
ENGLISH
Contents
Control panel ............................... 6
Remote controller — RM-RK240 ....... 7
Getting started............................. 10
Radio operations .......................... 12
Disc operations............................. 15
Unique disc functions.................... 20
Disc surround playback ................. 22
On-Screen disc operations ............. 24
Other disc operations.................... 28
Dual Zone operations.................... 30
AV Menu settings.......................... 31
Other main functions .................... 41
CD changer operations .................. 42
Satellite radio operations ................. 44
External component operations ......... 49
iPod®/D. player operations ................ 50
Maintenance................................ 52
Language codes............................ 53
More about this receiver ............... 54
Troubleshooting........................... 59
Specifications............................... 63
How to read this manual
The following methods are used to make the
explanations simple and easy-to-understand:
• Some related tips and notes are explained
in “More about this receiver” (see pages 54
– 58).
• Button operations are mainly explained
with the illustrations as follows:
Press briefly.
Press repeatedly.
Press either one.
Press and hold until your
desired response begins.
Press and hold both
buttons at the same time.
AVX2EN_book.indb 5AVX2EN_book.indb 5 06.1.25 6:19:46 PM06.1.25 6:19:46 PM

6
ENGLISH
SRC D
MENU
7/ BACK
KD-AVX2
DISP
A
ENTBAND
ASPECT
17
258
9pqe
4
r
t
y
u
i
6
w
3
1(standby/on attenuator) button
2• +/– (volume +/–) button
• SRC (source) button
• DISP (D: display) button
3Remote Sensor
4Monitor
5• 5(up) / ∞(down) buttons
• 4/¢buttons
6MENU button
7ASPECT (A) button
8(angle) button
90(eject) button
pReset button
q• BAND button
• BACK button
• 7(stop) button
w• ENT (enter) button
• 3(play) button
e(control panel release) button
Monitor indications
rSource indicator
tMain display
yClock display
Also indicates volume level when adjusting
volume.
uStatus indicators
iAlert information area
Also indicates volume level bar when
adjusting volume.
Parts identification
Monitor
indications
Ex.:
Source screen on
JPEG playback
Control panel
AVX2EN_book.indb 6AVX2EN_book.indb 6 06.1.25 6:19:47 PM06.1.25 6:19:47 PM

7
ENGLISH
Remote controller — RM-RK240
Installing the lithium coin battery
(CR2025)
Before using the remote controller:
• Aim the remote controller directly at the
remote sensor on the receiver. Make sure
there is no obstacle in between.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Remote
sensor
How to detach/attach the control panel
Detaching...
Attaching...
How to change the control panel angle
Angle 4
Angle 3
Angle 1 Angle 2
Caution: Do not insert your finger behind the control panel.
AVX2EN_book.indb 7AVX2EN_book.indb 7 06.1.25 6:19:47 PM06.1.25 6:19:47 PM

8
ENGLISH
IMPORTANT:
If Dual Zone is activated (see page 30),
the remote controller only functions for
operating the DVD/CD player.
MONITOR CONTROL
1Monitor control buttons*1
• (standby/on), MODE, ASPECT,
MENU, and .
DVD/RECEIVER CONTROL
2(standby/on attenuator) button
• Turns on and off the power and also
attenuates the sound.
3SOURCE button
• Selects the source.
4BAND button
• Selects the FM/AM/Satellite radio bands.
5ASPECT button
• Change the aspect of the monitor on the
unit when playing back DVD, VCD, etc.
6DUAL button
• Activate and deactivate Dual Zone.
7VOL + / – buttons
• Adjusts the volume level.
• Also function as 2nd VOL +/– buttons
when pressed with SHIFT button.
8TOP M (menu) button*2
• Display the DVD, DVD Audio, and
VCD*3disc menu.
9SHIFT button
pBasic disc operation buttons*4:
7(stop), 3(play), 8(pause)
• 3(play) also function as ZOOM button
when pressed with SHIFT button.
qAdvanced disc operation/tuner operation
buttons*5
For advanced disc operations:
• 5/ ∞
– Select the titles (for DVD), groups (for
DVD Audio), or folders (for MP3/
WMA/WAV/JPEG/MPEG).
• 4/ ¢(reverse skip/forward skip)
• 1/ ¡(reverse search/forward
search)*6
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accidents.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
The receiver is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual
(separate volume) for connection.
Main elements and features
MODE MENU ASPECT
ZOOM
ATT
SOURCE
DISC+
DISC–
DVD / RECEIVER CONTROL
EXTRA MONITOR CONTROL
+10
–10
123
456
78
0
9
–100
BAND
OSD
MENUTOP M
SETUP
RM-RK240
RETURN
ENTER
DUAL
SHIFT
VOL
2nd VOL
+100
DIRECT
ASPECT
SURROUND
*Not used as the SETUP button for this model.
AVX2EN_book.indb 8AVX2EN_book.indb 806.1.25 6:19:48PM06.1.25 6:19:48PM

9
ENGLISH
For FM/AM tuner operations:
• 5/ ∞
– Changes the preset stations.
• 4/ ¢
– Functions to search for stations.
Press briefly: auto search
Press and hold: manual search
For Satellite radio operations:
• 5/ ∞
– Changes the categories.
• 4/ ¢
– Changes the channels if pressed briefly.
– Changes the channels rapidly if pressed
and held.
For iPod/D. player operations:
• 5/ ∞
∞: Pauses/stops or resumes playback.
5: Enters the main menu of iPod/D.
player. (Now 5/ ∞/4/ ¢work as
the menu selection buttons)*7
• 4/ ¢(in menu selecting mode)
– Selects an item if pressed briefly.
(Then, press ∞to confirm the
selection.)
– Skips 10 items at a time if pressed and
held.
wOSD button
• Display the on-screen bar.
• Also function as the DIRECT button
when pressed with SHIFT button.
–You can directly select titles (for DVD),
groups (for DVD Audio) or folders (for
MP3/WMA/WAV/MPEG) using the
number buttons (see the right column
and page 19).
eMENU button*2
• Display the DVD and VCD*2disc menu.
(Not functions for the DVD Audio disc.)
rMenu operation buttons*2
• Cursor (%, fi, @, #) and ENTER
• %/ fi: Also function as DISC+/– buttons
when the source is “CD-CH”.
tRETURN button*2
How to select a number
To select a number from 0 – 9:
To select a number greater than 9:
• +100/–100 buttons used for searching track
number greater than 99 (not available for
CD/VCD/DVD/DVD audio).
ySpecial function buttons
• DVD/VCD: (audio)
• DVD: (subtitle), (angle)
• Also function as the SURROUND
button when pressed with SHIFT button.
–You can change the surround mode (see
page 23).
*1Controllable only if your monitor is one of the
JVC monitors — KV-MR9010 or
KV-MH6510.
*2ese buttons function as the number buttons
when pressed with SHIFT button.
*3Only when PBC is not in use.
*4Not used for CD changer operations.
*5ese buttons function as the +10/–10 and
+100/–100 buttons when pressed with SHIFT
button.
*6Not used for JPEG operations.
*75: Returns to the previous menu.
∞: Conrms the selection.
AVX2EN_book.indb 9AVX2EN_book.indb 9 06.1.25 6:19:49 PM06.1.25 6:19:49 PM

10
ENGLISH
~Turn on the power.
Ÿ
You cannot select some sources if they
are not ready.
!
For FM/AM tuner
For SIRIUS radio
For XM radio
⁄Adjust the volume.
@Adjust the equalizer as you want.
(See pages 38.)
To drop the volume in a moment (ATT)
To restore the sound,
press it again.
To turn off the power
Basic operations
SRC DDISP
SRC D
Canceling demonstration and setting
the clock
1
2Select “Setup”, then,
1Select “Display”, “Demonstration”, then
“Off” to cancel demonstration.
2Select “Clock”, “Time Set”, and go to the
next step to set the clock.
3Set the hour and minute.
1Select “Hour”, then adjust the hour.
2Select “Minute”, then adjust the minute.
MENU
Getting started
7/ BACK
BAND
Volume level indicator
AVX2EN_book.indb 10AVX2EN_book.indb 10 06.1.25 6:19:50 PM06.1.25 6:19:50 PM

11
ENGLISH
4Finish the procedure.
ENT
Basic procedure of AV Menu operation
You can adjust various settings of the unit from AV Menu.
• To call up AV Menu... MENU
• To select an menu item and proceed to the
sub menu...
• To go back to the previous screen and
adjust other items...
Selects a sub menu or a menu
item
Proceeds to the selected sub menu
Back to previous menu
then “24Hours”.
Selected item of the sub menu
currently selected
Selected sub menu
Current menu
Sub menus
Displays remaining time
to continue the menu
operation
Ex.: To change the clock from 12 hours to 24
hours, after pressing MENU...
7/ BACK
BAND
• To cancel menu operations and return to
the source screen, press DISP (D).
• See pages 31 – 40 for information of the
sub menus and menu items.
ENT
• See the example on “Basic procedure of AV
Menu operation” below to change the clock
from 12 hours to 24 hours.
Select “Setup”,
“Clock”,
“12Hours / 24Hours”,
AVX2EN_book.indb 11AVX2EN_book.indb 11 06.1.25 6:19:52 PM06.1.25 6:19:52 PM

12
ENGLISH
When an FM stereo broadcast is hard to
receive
1
2Select “Mode”, “Mono”, then “On”.
3Finish the procedure.
Lights up when monaural mode is activated.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure to set “Mono” to “Off”. The MO
indicator goes off.
To tune in strong-signal FM station only
1
2Select “Mode”, “DX / Local”, then “Local”.
~
Ÿ
Selected band appears.
Lights up when receiving an FM stereo broadcast with sufficient
signal strength.
!Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same
button again.
To tune in to a station manually
In step !above....
1
2Select the desired station frequencies.
SRC DDISP
TUNER (FM1/2/3,AM)
7/ BACK
BAND
MENU
ENT
Radio operations
MENU
AVX2EN_book.indb 12AVX2EN_book.indb 12 06.1.25 6:19:53PM06.1.25 6:19:53PM

13
ENGLISH
Manual presetting
After tuning in the station you want to preset...
1
2Select “List”, then a preset number
(1–6) you want to store the station
into.
• You can also display the list by pressing and
holding 5/∞buttons.
3
Stored preset number flashes for a while.
How to exit from menus or lists
Menu or list operations are canceled and the
screen returns to the source screen.
3Finish the procedure.
Lights up when “Local” mode is activated.
Only stations with sufficient signal strength
will be detected.
To tune in to all receivable stations, repeat the
same procedure to set “DX / Local” to “DX”.
The LO indicator goes off and the DX indicator
lights up.
ENT
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM (Strong-station Sequential Memory)
After selecting the FM band (FM1 – FM3) you
want...
1
2Select “Mode”, then “SSM”.
3
“SSM” is shown until automatic presetting
is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
ENT
MENU
SRC DDISP
ENT
EX.: Storing 92.5
MHz into preset
number 4 of FM1
MENU
AVX2EN_book.indb 13AVX2EN_book.indb 1306.1.25 6:19:54 PM06.1.25 6:19:54 PM

14
ENGLISH
Listening to a preset station
1
2
3Select a preset station (1 – 6) you
want.
When using the list screen...
After step 2 above...
1
2Select “List”, then a preset number
(1–6) you want.
SRC DDISP
TUNER (FM1/2/3,AM)
7/ BACK
BAND
• You can change the preset list between
FM1/2/3 by pressing and holding 5/∞
buttons (or by pressing 5/∞buttons
repeatedly) when selecting any of the FM
bands.
3
When using the remote controller...
or
MENU
ENT
AVX2EN_book.indb 14AVX2EN_book.indb 14 06.1.25 6:19:55 PM06.1.25 6:19:55 PM

15
ENGLISH
Before performing any operations, make sure
the following...
• The operations explained on pages 17 – 22 are
mainly of the remote controller.
– shows functions which you can
also use on the unit.
If “ ” appears on the monitor when
pressing a button, the receiver cannot accept
an operation you have tried to do.
• In some cases, without showing “ ”,
operations will not be accepted.
Disc operations
Playing a disc in the receiver
The disc type is automatically detected, and
playback starts automatically (for DVD Video/
Audio: automatic start depends on its internal
program).
If the current disc is an audio CD, CD Text,
MP3/WMA/WAV, JPEG, MPEG, or VCD
without PBC, all tracks will be played repeatedly
until you change the source or eject the disc.
• If a title list or disc menu appears while
playing a DVD Video/Audio or VCD with
PBC, see “Disc menu operations” on page 21.
To eject a disc
The following marks are used to indicate
the playable discs...
Audio
DVD
DVD Video DVD Audio Video CD with/without
PBC
MPEG
MPEG
JPEG
Video CD with PBC
only
MPEG disc JPEG disc
WAV
MP3
WMA
Audio CD/
CD Text
MP3/WMA/WAV
disc
All discs listed here
AVX2EN_book.indb 15AVX2EN_book.indb 15 06.1.25 6:19:56 PM06.1.25 6:19:56 PM

16
ENGLISH
• When inserting a DVD video/DVD Audio
disc:
Video/picture playback starts automatically
on the monitor when the parking brake is
applied.
• The screen such as below appears when
pressing DISP (D).
When an DVD is playing back
When a DVD Audio disc is playing back
• To return to playback, press DISP (D) again.
• When inserting a VCD:
VCD playback starts automatically on the
monitor when the parking brake is applied.
• The screen such as below appears when
pressing DISP (D).
*1Appears when the PBC function is in use.
• To return to playback , press DISP (D) again.
• When inserting an MP3/WMA/WAV/JPEG/
MPEG disc*2:
After showing the total folder and file
number...
*2When playing back a JPEG/MPEG disc, press
DISP (D) to display the screen. (Picture/video
playback is automatically starts when the
parking brake is applied.)
*3Does not appear for JPEG disc.
• When inserting a CD Text/audio CD:
After showing the total track number and total
playing time...
*4Disc title/performer and track title are
displayed when playing a CD Text.
Current folder
name
Current track name
Current track
number
Elapsed playing
time*3
*4
PBC indicator*1
Current track
number
Ex.: When an WAV file is detected
Elapsed playing
time
Current title
number
Current chapter
number
Elapsed playing
time
Elapsed playing time
Current folder/track
number
Format indication
B.S.P. (browsable still
pictures) indicator
Bonus group
indicator
Format indication
Current group/
track numbers
Surround/Sound indication
AVX2EN_book.indb 16AVX2EN_book.indb 16 06.1.25 6:19:57 PM06.1.25 6:19:57 PM

17
ENGLISH
Basic operations
Operations Monitor indication and/or next operation
To stop playback When you start playback again, playback
starts from where it has been stopped
(Resume play).
To stop play temporarily Playback is paused.
A still picture appears.
AFrame by frame playback
BSlow motion playback
• No sound comes out during Slow Motion Playback.
• When playing a VCD, Reverse Slow Motion Playback is prohibited.
To resume normal play:
To replay the previous
scenes—One Touch Replay
The playback position moves back about 10 seconds
before the current position.
• This function works only within the same title.
• For some DVDs, this function does not work.
• During play, on-screen guide icons appear on the monitor for a while (see page 58).
ENT
7/ BACK
BAND ENT
MPEG
MPEG
AVX2EN_book.indb 17AVX2EN_book.indb 17 06.1.25 6:19:58PM06.1.25 6:19:58PM

18
ENGLISH
To locate a particular title/group/
chapter/track directly
• For DVD Video/DVD Audio:
During play or pause—select a chapter/
track.
During stop—select a title/group.
• For MP3/WMA/WAV/JPEG/MPEG:
Select a track within the same folder.
Select the number corresponding to the item
you want (see page 9).
To locate a title/group/folder
To go to the next or previous chapters/tracks
• For DVD: During play or pause
To fast-forward or reverse the chapter/track
While playing back...
* The search speed changes to x2 ]x10 (¡
(1) 1/2 for MPEG), but the information
shown on the monitor is only for DVD/VCD/
MPEG.
To forward or reverse search
the chapter/track
While playing back...
The information shown is only for DVD/VCD:
* The search speed of an MPEG file is 3 steps
– ¡(1) 1/2/3.
• To resume normal speed
WA
V
MP3
WMA
JPEG
Audio
DVD
Audio
DVD
MPEG
MPEG
MPEG
MPEG
WA
V
MP3
WMA
MPEG
MPEG
WA
V
MP3
WMA
Audio
DVD
AVX2EN_book.indb 18AVX2EN_book.indb 1806.1.25 6:19:59 PM06.1.25 6:19:59 PM

19
ENGLISH
To locate a particular title/
group/folder
Within 10 seconds,
press the number
buttons (see page 9).
IMPORTANT:
• For MP3/WMA/WAV discs: It is required
that folders are assigned with 2-digit number
at the beginning of their folder names—01,
02, 03, and so on.
To adjust the screen shape on the unit
• See “Aspect” on page 33 for the detail.
A
ASPECT
MPEG
MPEG
Audio
DVD
ASPECT
To skip to the next or previous scene
You can skip the scene back and forward
by 5 minutes.
Ex.: when you are playing a 24-minute MPEG
file and the elapsed playing time is 8’24”...
• The first pressing of the buttons skips the
scene to the nearest multiple-of-5 playing time
(except current playing time).
• This function does not work when remaining
time to skip forward or back is under 5
minutes.
MPEG
MPEG
Current playback position
WA
V
MP3
WMA
Audio
DVD
JPEG
JPEG
MPEG
MPEG
AVX2EN_book.indb 19AVX2EN_book.indb 19 06.1.25 6:20:01 PM06.1.25 6:20:01 PM

20
ENGLISH
Selecting subtitles
You can select the language of the
subtitle to be shown on the monitor.
• You can set the initial subtitle language
using the AV Menu (see page 34).
Ex.: When the disc has 3 options
• For some DVDs and VCDs, changing the
subtitle language, audio language (or audio
channel) without using the disc menu is
prohibited.
Selecting multi-angle views
You can view the same scene at different
angles if the disc has multi-angle views.
Ex.: When the disc has 3 multi-angle views
ENGLISH
1/3
ENGLISH
1/3
1
1/3
2
1/3
3
1/3
1
1/3
1
1/3
Selecting audio languages
For DVD:
You can select the language to listen to if
the disc has multiple audio languages.
Ex.: When the disc has 3 options
For VCD:
You can select the audio channel to
play. (This is convenient when playing a
Karaoke VCD.)
ST: To listen to normal stereo (left/right)
playback.
L: To listen to the L (left) audio channel.
R: To listen to the R (right) audio channel.
ENGLISH
1/3
ENGLISH
1/3
ST
ST
Unique disc functions
AVX2EN_book.indb 20AVX2EN_book.indb 20 06.1.25 6:20:02 PM06.1.25 6:20:02 PM