JVC KD-DB95BT User manual

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ENGLISH
DEUTSCH
FRANÇAIS
GET0953-001B [EN]
KD-DB95BT / KD-DB65
CD RECEIVER
INSTRUCTION MANUAL
CD-RECEIVER
BEDIENUNGSANLEITUNG
RÉCEPTEUR CD
MANUEL D’INSTRUCTIONS
Please read all instructions carefully before
operation to obtain the best possible performance
from the unit.
Bitte lesen Sie alle Bedienungsanweisungen
vor dem Betrieb gründlich durch, um die beste
Leistung mit dem Gerät zu erzielen.
Veuillez lires les instructions attentivement avant
d’utiliser l’appareil afin d’obtenir les meilleures
performances possibles de l’appareil.
JS_JVC_KD-DB95BT_E_C001B.indd 1JS_JVC_KD-DB95BT_E_C001B.indd 1 12/19/2013 10:54:45 AM12/19/2013 10:54:45 AM

i
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of
handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper
recycling and waste disposal will help conserve resources whilst preventing detrimental effects
on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien
(anzuwenden in den Ländern der Europäischen Union und anderen europäischen
Ländern mit einem separaten Sammelsystem für solche Geräte)
Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist
darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf,
sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten
und batterien abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und
die Gesundheit Ihrer Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere
Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den
kommunalen Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei
enthalt.
Information sur l’élimination des anciens équipements électriques et électroniques
et piles électriques (applicable dans les pays de l’Union Européenne qui ont adopté
des systèmes de collecte sélective)
Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne
peuvent pas être éliminés comme ordures ménagères.
Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés
sur des sites capables de traiter ces produits et leurs déchets.
Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage
adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des
leurs effets nocifs sur notre santé et sur l’environnement.
Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient
du plomb.
For Israel
JS_JVC_KD-DB95BT_E_S001A.indd iJS_JVC_KD-DB95BT_E_S001A.indd i 11/22/2013 11:32:29 AM11/22/2013 11:32:29 AM

ii
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
The marking of products using lasers
The label is attached to the chassis/case and says that the component uses laser beams that
have been classified as Class 1. It means that the unit is utilizing laser beams that are of a
weaker class. There is no danger of hazardous radiation outside the unit.
Kennzeichnung von Geräten mit Laser-Abtastern
Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente
Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf
hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören.
Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche
Strahlungen außerhalb des Geräts besteht.
Marquage des produits utilisant un laser
L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des
rayons laser de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il
n’y a pas de danger de radiation accidentelle hors de l’appareil.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been
designed to connect specifically to iPod, or iPhone, respectively, and has been certified
by the developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. Please
note that the use of this accessory with iPod or iPhone may affect wireless performance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• Lightning is a trademark of Apple Inc.
• Android is trademark of Google Inc.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other
trademarks and trade names are those of their respective owners.
JS_JVC_KD-DB95BT_E_S001A.indd iiJS_JVC_KD-DB95BT_E_S001A.indd ii 11/22/2013 11:32:30 AM11/22/2013 11:32:30 AM

2
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CONTENTS BEFORE USE
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the USB device or iPod/iPhone if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short
circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
• For
KD-DB95BT : USB rating is indicated on the main unit. To view, detach the faceplate. ( 3)
Remote control (RM-RK52):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or
equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used
batteries promptly. If swallowed, contact a physician immediately.
BEFORE USE 2
BASICS 3
GETTING STARTED 4
CD / USB / iPod 5
DIGITAL RADIO (DAB) 7
ANALOG RADIO 9
AUX 11
BLUETOOTH® (for
KD-DB95BT) 11
AUDIO SETTINGS 16
DISPLAY SETTINGS 17
MORE INFORMATION 18
TROUBLESHOOTING 19
SPECIFICATIONS 21
INSTALLATION /
CONNECTION 22
How to read this manual
• Operations are explained mainly
using buttons on the faceplate of
KD-DB65 .
•
[XX] indicates the selected items.
•
( XX) indicates references are
available on the stated page.
Maintenance
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector
gently with a cotton swab, being careful not to damage the connector.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
Connector (on the reverse
side of the faceplate)
JS_JVC_KD-DB95BT_E_f_EN.indd 2JS_JVC_KD-DB95BT_E_f_EN.indd 2 12/5/2013 9:20:55 AM12/5/2013 9:20:55 AM

3
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BASICS
Remote control (RM-RK52) (not supplied)
KD-DB95BT can be remotely controlled with an
optionally purchased remote control.
To Do this (on the faceplate) Do this (on the remote control)
Turn on the power Press B/SOURCE.
• Press and hold to turn off the power. ( not available )
Adjust the volume Turn the volume knob. Press VOL + or VOL –.
Press the volume knob to mute the sound* or pause playback.
• Press again to cancel. Press to mute the sound or pause playback.
• Press again to cancel.
Select a source • Press B/SOURCE repeatedly.
• Press B/SOURCE, then turn the volume knob within 2 seconds.
Press SOURCE repeatedly.
Change the display
information
Press DISP repeatedly.
( 19)
• Press and hold to scroll the current display information. ( not available )
* DAB: Not applicable.
Attach
How to reset
Detach
Your preset adjustments
will also be erased.
KD-DB95BT
KD-DB95BT
KD-DB95BT
Faceplate
Volume knob
(turn/press) Loading slot
Detach
button
Display window
ENGLISH |
Pull out the insulation sheet
when using for the first time.
How to replace the battery
Remote sensor (Do not expose
to bright sunlight.)
JS_JVC_KD-DB95BT_E_f_EN.indd 3JS_JVC_KD-DB95BT_E_f_EN.indd 3 11/22/2013 11:54:26 AM11/22/2013 11:54:26 AM

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
1 Press and hold MENU.
2 Turn the volume knob to select [DEMO] , then press the knob.
3 Turn the volume knob to select [DEMO OFF] , then press the knob.
4 Press MENU to exit.
Set the clock
1 Press and hold MENU.
2 Turn the volume knob to select [CLOCK] , then press the knob.
3 Turn the volume knob to select [CLOCK SET] , then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [24H/ 12H] , then press the knob.
6 Turn the volume knob to select [12 HOUR] or [24 HOUR] , then press the
knob.
7 Press MENU to exit.
Set the basic settings
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press T/P.
1
2
Default: XX
CLOCK
CLOCK ADJ AUTO
:The clock time is automatically set using the Clock Time (CT) data
in DAB signal.;
OFF :Cancels.
CLOCK DISP ON :The clock time is shown on the display even when the unit is turned
off.;
OFF :Cancels.
SETTINGS
BEEP ON
:Activates the keypress tone.; OFF :Deactivates.
SRC SELECT
AM
* 1 ON :Enables AM in source selection.; OFF :Disables.
AUX * 1 ON :Enables AUX in source selection.; OFF :Disables.;
BT ADAPTER * 2 :Select when the KS-BTA100 Bluetooth adapter is
connected to the auxiliary input jack
( 11) . The source name will
change to BTAUDIO.
F/W UPDATE
SYSTEM / BLUETOOTH * 3 / DAB1 / DAB2
F/W xxxx
/
F/W xx.x.x
/
F/W Vxxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
*1Not displayed when the corresponding source is selected.
*2For
KD-DB65 .
*3For
KD-DB95BT .
3
JS_JVC_KD-DB95BT_E_f_EN.indd 4JS_JVC_KD-DB95BT_E_f_EN.indd 4 11/22/2013 11:54:26 AM11/22/2013 11:54:26 AM

5
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CD / USB / iPod
To Do this
Select a track/file Press S/T(or press H/Ion RM-RK52).
Select a folder *2Press 1K/2J(or press J/Kon RM-RK52).
Reverse/
Fast-forward Press and hold S/T(or press and hold H/Ion RM-RK52).
Repeat play *3Press 4repeatedly to make a selection.
• Audio CD or JVC Playlist Creator (JPC) / JVC Music Control (JMC) file ( 19) :
TRACKRPT, RPT OFF
• MP3/WMA/AAC/WAV file: TRACKRPT, FOLDER RPT, RPT OFF
• iPod: ONE RPT, ALL RPT, RPT OFF
Random play *3Press 3repeatedly to make a selection.
• Audio CD: ALL RND, RND OFF
• MP3/WMA/AAC/WAV file or JPC / JMC file: FOLDERRND, ALL RND, RND OFF
• iPod: SONG RND, ALL RND, RND OFF
*1Do not leave the cable inside the car when not using.
*2Only for MP3/WMA/AAC/WAV files. This does not work for iPod.
*3For iPod: Applicable under
[HEAD MODE] only.
Start playback
The source changes automatically and
playback starts.
CD
USB
iPod/iPhone
Press 5 iPod MODE repeatedly to select the
control mode (
[HEAD MODE] / [IPHONE MODE] ).
Eject disc Label side
USB input terminal
USB input terminal USB 2.0 cable
*1
(commercially available)
(Accessory of the iPod/iPhone)
*1
JS_JVC_KD-DB95BT_E_f_EN.indd 5JS_JVC_KD-DB95BT_E_f_EN.indd 5 11/22/2013 11:54:27 AM11/22/2013 11:54:27 AM

6
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select a track/file from a list
For iPod: Applicable only when [HEAD MODE] is selected. ( 5)
1 Press MENU
2 Turn the volume knob to make a selection, then press the knob.
• MP3/WMA/AAC/WAV file: Select the desired folder, then a file.
• iPod or JPC / JMC file: Select the desired file from the list (PLAYLISTS,
ARTISTS, ALBUMS, SONGS, PODCASTS*, GENRES, COMPOSERS*,
AUDIOBOOKS*).
*
Only for iPod.
If you have many files....
You can search through them quickly (on step 2above) by turning the
volume knob quickly.
• Not applicable for iPod.
Select a song by name
While listening to the iPod and [HEAD MODE] is selected ( 5) ....
If you have many folders or tracks/files, you can search through them
quickly according to the first character (A to Z, 0 to 9 and OTHERS).
• “OTHERS” appear if the first character is other than Ato Z, 0 to 9.
1 Press MENU.
2 Turn the volume knob to select the desired list, then press the
knob.
3 Press 1K/2Jor turn the volume knob quickly to select the desired
character.
4 Turn the volume knob to select the desired folder or track/file, then
press the knob.
Change the USB drive
When a smartphone (Mass Storage Class) is connected to the USB input
terminal, you can select its internal memory or external memory (such as an
SD card) to playback the stored songs.
You can also select the desired drive to playback when a multiple drives
device is connected.
Press number button 5 iPod MODE repeatedly to select the desired
drive.
(or)
1 Press and hold MENU.
2 Turn the volume knob to select [USB/IPOD] , then press the knob.
3 Turn the volume knob to select [USB] , then press the knob.
4 Press the volume knob to select [DRIVECHANGE] .
The next drive is selected automatically.
Repeat steps 1to 4to select the following drives.
Selectable items:
[DRIVE  1] to [DRIVE  5]
Change the playback speed of the Audiobook
While listening to the iPod and [HEAD MODE] is selected ( 5) ....
1 Press and hold MENU.
2 Turn the volume knob to select [USB/IPOD] , then press the knob.
3 Turn the volume knob to select [IPOD] , then press the knob.
4 Turn the volume knob to make a selection, then press the knob.
BOOK NORMAL / BOOK FASTER / BOOK SLOWER : Select the desired playback
speed of the Audiobooks sound file in your iPod/iPhone.
(Default: Depends on your iPod/iPhone setting.)
• To return to the previous setting item or hierarchy, press T/P.
• To cancel, press MENU.
CD / USB / iPod
JS_JVC_KD-DB95BT_E_f_EN.indd 6JS_JVC_KD-DB95BT_E_f_EN.indd 6 11/22/2013 11:54:27 AM11/22/2013 11:54:27 AM

7
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DIGITAL RADIO (DAB)
About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems available today. It
can deliver digital quality sound without any annoying interference or
signal distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is transmitted on its
own frequency, DAB combines several programs (called “services”) to
form one “ensemble.”
The “primary component” (main radio station) is sometimes accompanied
by a “secondary component” which can contain extra programs or other
information.
Preparation:
1 Connect a DAB antenna to the DAB antenna jack. ( 23)
2 Press B/SOURCE or DAB to select DAB.
3 Press and hold DAB to start the Service List update.
“DAB SORTING” appears and update starts.
Updates take up to 3 minutes. No interruption (such as traffic
information) is possible during updates.
• To cancel the Service List update: Press and hold DAB again.
KD-DB95BT
Start listening
1 Press B/SOURCE or DAB to select DAB.
2 Press S/T(or H/Ion RM-RK52) to search for an ensemble
automatically.
(or)
Press and hold S/ T(or H/ Ion RM-RK52) until “M” flashes,
then press repeatedly to search for an ensemble manually.
3 Press S/ T(or H/ Ion RM-RK52) to select a service (either
primary or secondary) to listen to.
Store a service
You can store up to 18 services.
While listening to a service....
Press and hold one of the number buttons (
KD-DB95BT :1to5/
KD-DB65 :1to6) to store.
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
• To select a stored service: Press one of the number buttons
(
KD-DB95BT :1to5/ KD-DB65 :1to6).
(or)
Press MENU, then turn the volume knob to select a preset number and
press the knob to confirm.
Select a service
1 Press DAB.
2 Turn the volume knob to select a service, then press the knob.
To cancel the Service Search mode, press T/P or DAB.
JS_JVC_KD-DB95BT_E_f_EN.indd 7JS_JVC_KD-DB95BT_E_f_EN.indd 7 11/22/2013 11:54:27 AM11/22/2013 11:54:27 AM

8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select a service by name
1 Press DAB.
2 Press 1K/2Jto enter Alphabet Search.
3 Press 1K/2Jto select the character to be searched for.
4 Press the volume knob to start searching.
5 Turn the volume knob to select a service, then press the knob.
Search for your favorite program (PTY Search)
1 Press and hold T/P.
2 Turn the volume knob to select a PTY code ( 9, PTY code) , then press
the knob.
If there is a service broadcasting a program of the same PTY code as
you have selected, that service is tuned in.
Activate TA Standby Reception
Press T/P.
The unit will temporarily switch to Traffic Announcement (TA) (if
available) from any source.
To deactivate, press T/P again.
Other settings
1 Press and hold MENU.
2 Turn the volume knob to select [TUNER] , then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press T/P.
Default: XX
RADIO TIMER Turns on the radio at a specific time regardless of the current source.
1 ONCE / DAILY / WEEKLY / OFF :Select how often the timer will be turned
on.
2 FM / AM / DAB :Select the FM, AM or DAB band.
3 01 to 18 (for FM)/ 01 to 06 (for AM)/ 01 to 18 (for DAB):Select the preset
station.
4 Set the activation day* and time.
• “
 ” lights up when complete.
* Selectable only when [ONCE] or [WEEKLY] is selected in step 1 .
Radio Timer will not activate for the following cases.
• The unit is turned off.
•
[OFF] is selected for [AM] in [SRC SELECT] after Radio Timer for AM is
selected.
( 4)
AF SET ON
:
While listening to DAB...
Automatically switch to FM broadcasting the same program if the DAB signal
becomes weak. It will switch back to DAB sound when the signal becomes
strong again.
While listening to FM...
Automatically switch to DAB source broadcasting the same program (if
available).;
OFF :Cancels.
DAB
ANNCMNT
TRAVEL, WARNINGS, NEWS, WEATHER, EVENT, SPECIAL, RAD INFO,
SPORTS, FINANCE
: Turn the volume knob to select an announcement type,
then press the knob to activate.
“*” appears in front of the activated announcement type.
Automatically switch from any source to Digital radio ensembles
broadcasting an activated announcement type.
•
Multiple announcement can be activated simultaneously.
•
To deactivate, press the volume knob again (“*” goes off).
DAB UPDATE AUTO :Automatically updates the DAB Service List when the power is turned
on.;
OFF :Update the DAB Service List by pressing and holding DAB .
DIGITAL RADIO (DAB)
JS_JVC_KD-DB95BT_E_f_EN.indd 8JS_JVC_KD-DB95BT_E_f_EN.indd 8 11/22/2013 11:54:28 AM11/22/2013 11:54:28 AM

9
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ANALOG RADIO
“ST” lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1 Press B/SOURCE to select FM or AM.
2 Press S/T(or press H/Ion RM-RK52) to search for a station
automatically.
(or)
Press and hold S/T(or press and hold H/Ion RM-RK52) until
“M” flashes, then press repeatedly to search for a station manually.
Store a station
You can store up to 18 stations for FM and 6 stations for AM.
While listening to a station....
Press and hold one of the number buttons (
KD-DB95BT :1to5/
KD-DB65 :1to6) to store.
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
• To select a stored station: Press one of the number buttons
(
KD-DB95BT :1to5/ KD-DB65 :1to6).
(or)
Press MENU, then turn the volume knob to select a preset number and
press the knob to confirm.
PTY-STBY Automatically switch from any source to Digital Radio ensembles
broadcasting a selected type of program.
( PTY code)
OFF
:Cancels.
DAB L-BAND ON :Receives L-BAND ensemble during digital audio reception.;
OFF :Cancels.
DAB ANT PWR ON :Supplies power to the DAB antenna. Selects when using the DAB
antenna with booster.;
OFF :Does not supply power. Selects when using
passive antenna without booster.
( 23)
PTY code: NEWS , AFFAIRS , INFO , SPORT , EDUCATE , DRAMA , CULTURE , SCIENCE ,
VARIED , POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS , OTHER M (music), WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION ,
PHONE IN , TRAVEL , LEISURE , JAZZ , COUNTRY , NATION M (music), OLDIES , FOLK M
(music),
DOCUMENT
Replay
1 Press the volume knob.
“REPLAY MODE” appears and the unit memorize this paused position.
2 Press the volume knob again to start replay.
You can replay a certain length of time of the current service
(depending on the audio bit rate).
During Replay...
• To pause or resume playback, press the volume knob.
• To skip the current song backward/forward, press S/ T(or press
H/Ion RM-RK52).
• To rewind/fast-forward, press and hold S/ T(or press and hold
H/Ion RM-RK52).
• To exit from Replay and go to live, press and hold the volume knob.
DIGITAL RADIO (DAB)
JS_JVC_KD-DB95BT_E_f_EN.indd 9JS_JVC_KD-DB95BT_E_f_EN.indd 9 11/22/2013 11:54:28 AM11/22/2013 11:54:28 AM

10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Search for your favorite program (PTY Search)
Available only for FM source.
1 Press and hold T/P.
2 Turn the volume knob to select a PTY code, then press the knob to
start searching.
If there is a station broadcasting a program of the same PTY code as
you have selected, that station is tuned in.
PTY code: NEWS , AFFAIRS , INFO , SPORT , EDUCATE , DRAMA , CULTURE , SCIENCE , VARIED ,
POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS , OTHER M
(music),
WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION , PHONE IN , TRAVEL , LEISURE ,
JAZZ , COUNTRY , NATION M (music), OLDIES , FOLK M (music), DOCUMENT
Activate TA Standby Reception
Press T/P.
The unit will temporarily switch to Traffic Announcement (TA) (if
available).
• In AM source, activate TA will enable traffic announcement interruption
from AM to DAB source only.
To deactivate, press T/P again.
Other settings
1 Press and hold MENU.
2 Turn the volume knob to select [TUNER] , then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press T/P.
Default: XX
RADIO TIMER ( 8)
SSM
* SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18 :Automatically presets up to
18 stations for FM. “SSM” stops flashing when the first 6 stations are stored.
Select
SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
IF BAND * AUTO :Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.);
WIDE :Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
MONO * ON :Improves the FM reception, but the stereo effect will be lost.;
OFF :Cancels.
NEWS-STBY * ON :The unit will temporarily switch to News Programme if available.;
OFF :Cancels.
REGIONAL * ON : Switches to another station only in the specific region using the “AF”
control.;
OFF :Cancels.
AF SET * ON : Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
OFF : Cancels.
* Only for FM source.
ANALOG RADIO
JS_JVC_KD-DB95BT_E_f_EN.indd 10JS_JVC_KD-DB95BT_E_f_EN.indd 10 11/22/2013 11:54:28 AM11/22/2013 11:54:28 AM

11
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Use a portable audio player
1 Connect a portable audio player (commercially available).
2 Select [ON] for [AUX] in [SRC SELECT] . ( 4)
3 Press B/SOURCE to select AUX.
4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio
output.
Use a Bluetooth® device (for KD-DB65 )
1 Connect the Bluetooth adapter, KS-BTA100 (separately purchased).
2 Register (pair) the Bluetooth device with KS-BTA100.
3 Select [BT ADAPTER] for [AUX] in [SRC SELECT] . ( 4) .
4 Press B/SOURCE to select BT AUDIO.
5 Start using the Bluetooth device.
For details, refer to the instruction manual of KS-BTA100.
3.5mm stereo mini plug with “L” shaped connector
(commercially available)
Portable audio player
Auxiliary input jack
Auxiliary input jack
Blue/white Blue/white: Remote
Black Black: Ground
Brown Brown: Tel muting
Wiring harness of the unit
( 23)
AUX BLUETOOTH® (for KD-DB95BT )
You can operate Bluetooth devices using this unit.
Connect the microphone
If you turn off the unit or detach the control panel during a phone call
conversation, the Bluetooth connection is disconnected. Continue the
conversation using your mobile phone.
Supported Bluetooth profiles
– Hands-Free Profile (HFP1.5)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP1.3)
– Object Push Profile (OPP)
– Phonebook Access Profile (PBAP)
– Serial Port Profile (SPP)
Adjust the microphone
angle Secure using cord clamps (not
supplied) if necessary.
MIC (Microphone input terminal)
Microphone (supplied)
Rear panel
JS_JVC_KD-DB95BT_E_f_EN.indd 11JS_JVC_KD-DB95BT_E_f_EN.indd 11 6/12/2013 12:14:59 PM6/12/2013 12:14:59 PM

12
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pair a Bluetooth device
When connecting a Bluetooth device to the unit for the first time,
perform pairing between the unit and the device. Once the pairing is
completed, the Bluetooth device will remain registered in the unit even if
you reset the unit.
• Up to five devices can be registered (paired) in total.
• A maximum of two Bluetooth phones and one Bluetooth audio device
can be connected at any time.
• This unit supports Secure Simple Pairing (SSP).
• Some Bluetooth devices may not automatically connect to the unit
after pairing. Connect the device to the unit manually. Refer to the
instruction manual of the Bluetooth device for more information.
1 Press B/SOURCE to turn on the unit.
2 Search and select “JVC UNIT” on the Bluetooth device.
“BTPAIRING” flashes on the display.
• For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3 Perform (A) or (B) depending on what scrolls on the display.
• For some Bluetooth devices, pairing sequence may vary from the
steps described below.
(A) “[Device Name]” “XXXXXX” “VOL–YES” “BACK–NO”
• “XXXXXX” is a 6-digit passkey randomly generated during each
pairing.
Ensure that the passkey which appears on the unit and
Bluetooth device is the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
(B) “[Device Name]” “VOL–YES” “BACK–NO”
Press the volume knob to start pairing.
• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN
code “0000” into the Bluetooth device.
You can change to a desired PIN code before pairing.
( 15)
• If only “PAIRING” appears, operate the Bluetooth device to
confirm pairing.
BLUETOOTH®
“PAIRING COMPLETED” appears when pairing is completed.
• “ ” will light up when a Bluetooth mobile phone is connected.
• “ ” will light up when a Bluetooth audio player is connected.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device connected.
1 Press and hold .
“BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW USING
PHONE” “PIN IS 0000” scrolls on the display.
2 Search and select “JVC UNIT” on the Bluetooth device within
3minutes.
3 Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey): Ensure that the same
passkey appears on the unit and Bluetooth device, then operate
the Bluetooth device to confirm the passkey.
(B) “PAIRING” “PIN IS 0000”: Enter “0000” on the Bluetooth device.
(C) “PAIRING”: Operate the Bluetooth device to confirm pairing.
After pairing is successful, “PAIRING OK” “[Device Name]” appears and
Bluetooth compatibility check starts.
If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device
to allow phonebook access to continue.
The connectivity result flashes on the display.
“PAIRING OK” and/or “H.FREE OK”*1and/or “A.STREAM OK”*2and/or
“PBAP OK”*3: Compatible
*1Compatible with Hands-Free Profile (HFP)
*2Compatible with Advanced Audio Distribution Profile (A2DP)
*3Compatible with Phonebook Access profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B/SOURCE to turn off the power, then turn
on the power again.
JS_JVC_KD-DB95BT_E_f_EN.indd 12JS_JVC_KD-DB95BT_E_f_EN.indd 12 2/12/2013 12:03:56 PM2/12/2013 12:03:56 PM

13
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth mobile phone
To Do this
Receive a call Press or the volume knob.
On RM-RK52: Press J/K/ H/I/ SOURCE.
• When
[AUTO ANSWER] is set to the selected
time, the unit answers incoming call
automatically.
( 14)
Reject an incoming
call Press and hold or the volume knob.
On RM-RK52: Press and hold J/K/ H/I/
SOURCE.
End a call Press and hold or the volume knob.
On RM-RK52: Press and hold J/K/ H/I/
SOURCE.
Activate or deactivate
hands-free mode
Press the volume knob during a call.
• Operations may vary according to the
connected Bluetooth mobile phone.
Adjust the phone
volume
Turn the volume knob during a call.
Phone volume:
[00] to [50] (Default: [15] )
• This adjustment will not affect the volume of
the other sources.
Switch between two
connected phones Press repeatedly.
• Not applicable during a call.
Improve the sound quality during a call
While talking on the phone....
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press T/P.
Default: XX
MIC LEVEL –20
— +08 ( 0 ):The sensitivity of the microphone increases as the
number increased.
NOISE RDCT –05 —– 20 ( –10 ):Adjust the noise reduction level until the least
noise is being heard during a phone conversation.
ECHO CANCEL 1 — 10 ( 4 ):Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Bluetooth mode operations
1 Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press T/P.
RECENT CALL
1 Press the volume knob to select a name or a phone number.
• “>” indicates call received, “<“ indicates call made, “M” indicates
call missed.
• “NO HISTORY” appears if there is no recorded call history or call
number.
2 Press the volume knob to call.
PHONEBOOK 1 Turn the volume knob to select a name, then press the knob.
2 Turn the volume knob to select a phone number, then press the knob to
call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does
not support PBAP, “SEND P.BOOK MANUALLY” appears. Transfer the
phonebook manually.
(  15, P.BOOK WAIT)
• This unit can display only non-accent letters. (Accent letters such as “Ú”
is showns as “U”.)
• If the phonebook contains many contacts,
(  14, Select a contact by
name).
BLUETOOTH®
JS_JVC_KD-DB95BT_E_f_EN.indd 13JS_JVC_KD-DB95BT_E_f_EN.indd 13 11/22/2013 11:54:30 AM11/22/2013 11:54:30 AM

14
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press S/ T to move the entry position.
Repeat steps
1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions.
( Use Voice Recognition)
SETTINGS Default: XX
AUTO ANSWER 01 SEC
— 30 SEC :The unit answer incoming call automatically in the
selected time (seconds).;
OFF :Cancels.
RING TONE IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
•
CALL: Selects your preferred ring tone ( TONE 1 — 5 ) for incoming
calls.
•
MESSAGE: Selects your preferred ring tone ( TONE 1 — 5 ) for
incoming text messages.
IN PHONE: The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
RING COLOR COLOR  01 — COLOR  29 ( COLOR 06 ): Display zone will change to
the selected color during a call or when a text message comes in.;
OFF :Cancels.
MSG NOTICE ON: The unit rings and “RCV MESSAGE” appears to notify you of an
incoming text message.;
OFF :Cancels.
Text message notification
When the phone receives a text message, the unit rings and “RCV
MESSAGE” appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1 Press and hold .
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding activate the priority device.
( 15, PRIORITY)
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Select a contact by name
• You can search through the contacts quickly according to the first letter
(A to Z, 0 to 9, and OTHERS).
• “OTHERS” appears if the first character is other than A to Z, 0 to 9.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [PHONEBOOK] , then press the knob.
3 Press 1K/2Jto select the desired letter.
4 Turn the volume knob to select a name, then press the knob.
5 Turn the volume knob to select a phone number, then press the
knob to call.
To return to the previous setting item or hierarchy, press T/P.
Store a contact in memory
You can store up to 5 contacts.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL] , [PHONEBOOK] , or
[DIAL NUMBER] , then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
BLUETOOTH®
JS_JVC_KD-DB95BT_E_f_EN.indd 14JS_JVC_KD-DB95BT_E_f_EN.indd 14 11/22/2013 11:54:30 AM11/22/2013 11:54:30 AM

15
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
4 Press and hold one of the number buttons (1to 5).
“MEMORY PX” appears when the contact is stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in
step
2 and store a blank number.
Make a call from memory
1 Press to enter Bluetooth mode.
2 Press one of the number buttons (1to 5).
3 Press the volume knob to call.
“NO PRESET” appears if there is no contacts stored.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL] or [PHONEBOOK] , then
press the knob.
3 Turn the volume knob to select a contact or a phone number.
4 Press and hold GT/P.
5 Turn the volume knob to select [DELETE] or [DELETE ALL] , then press
the knob.
DELETE : Selected name or phone number in step 3is deleted.
DELETE ALL : All names or phone numbers from the selected menu in
step 2is deleted.
6 Turn the volume knob to select [YES] or [NO] , then press the knob.
Bluetooth mode settings
1 Press and hold MENU.
2 Turn the volume knob to select [BLUETOOTH] , then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press GT/P.
BLUETOOTH®
Default: XX
PHONE
Selects the phone or audio device to connect or disconnect.
AUDIO
APPLICATION
Shows the connected phone name using the JVC Smart Music Control * 1
app. “ ” appears in front of the device name.
DELETE PAIR 1 Turn the volume knob to select a device to delete, then press the
knob.
2 Turn the volume knob to select [YES] or [NO] , then press the knob.
PRIORITY Selects a device to be connected as priority device. “ ” appears in front
of the device name set as priority.
•
“NO PAIR” appears if there is no registered device found.
P.BOOK WAIT * 2 Copies up to 400 numbers from the phonebook memory of a connected
phone.
SET PINCODE
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press S/ T to move the entry position.
Repeat steps
1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
AUTO CNNCT ON :The unit automatically reconnect when the Bluetooth device is
within range.;
OFF :Cancels.
INITIALIZE YES :Updates all the Bluetooth settings (including stored pairing,
phonebook, and etc.).;
NO :Cancels.
INFORMATION MY  BT  NAME : Displays the unit name (JVCUNIT).;
MY  ADDRESS : Shows address of this unit.
*1JVC Smart Music Control is designed to view JVC car receiver status
and perform simple control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www.jvc.net/cs/car/>.
*2Selectable only when the connected phone supports OPP.
JS_JVC_KD-DB95BT_E_f_EN.indd 15JS_JVC_KD-DB95BT_E_f_EN.indd 15 12/5/2013 10:35:26 AM12/5/2013 10:35:26 AM

16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Bluetooth audio player
Operations and display indications may differ according to their
availability on the connected device.
To Do this
Playback 1 Press B/SOURCE to select BTAUDIO.
2 Operate the Bluetooth audio player to start
playback.
Pause or resume
playback Press MENU (or on RM-RK52).
Select group or folder Press 1K/2J(or J/Kon RM-RK52).
Reverse/forward skip Press S/T(or H/Ion RM-RK52).
Reverse/fast-forward Press and hold S/T(or H/Ion
RM-RK52).
Repeat play Press 4repeatedly to make a selection.
TRACKRPT, ALLRPT, RPTOFF
Random play Press 3repeatedly to make a selection.
GROUPRND, ALLRND, RNDOFF
AUDIO SETTINGS
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat step 2until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press T/P.
Default: XX
EQ SETTING
EQ PRESET FLAT
/ HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE :Selects a preset
equalizer.
EASY EQ
Default: 00
1 USER1 / USER2 :Select a preset name.
2 Adjust your own sound settings.
SUB.W
*1
: –08 to +08 / BASS  LVL : –06 to +06 /
MID  LVL: –06 to +06 / TRE  LVL : –06 to +06
PRO EQ
1 USER1 / USER2 :Select a preset name.
2 BASS / MIDDLE / TREBLE :Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
BASS Frequency: 60 / 80 / 100 / 200 Hz Default: ( 80 Hz )
Level:
–06 to +06 ( 00 )
Q:
Q1.0 / Q1.25 / Q1.5 / Q2.0 ( Q1.0 )
MIDDLE Frequency: 0.5 / 1.0 / 1.5 / 2.5 kHz Default: ( 1.0 kHz )
Level:
–06 to +06 ( 00 )
Q:
Q0.75 / Q1.0 / Q1.25 ( Q1.25 )
TREBLE Frequency: 10.0 / 12.5 / 15.0 / 17.5 kHz Default: ( 10.0 kHz )
Level:
–06 to +06 ( 00 )
Q:
Q FIX ( Q FIX )
AUDIO
BASS BOOST +01
/ +02 : Selects your preferred bass boost level.; OFF :Cancels.
LOUD 01 / 02 :Boosts low or high frequencies to produce a well-balanced sound at
low volume.;
OFF :Cancels.
JS_JVC_KD-DB95BT_E_f_EN.indd 16JS_JVC_KD-DB95BT_E_f_EN.indd 16 11/22/2013 11:54:30 AM11/22/2013 11:54:30 AM

17
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
SUB.W LEVEL
*1
–08 — +08 ( 00 ):Adjusts the subwoofer output level.
SUB.W
*2
ON / OFF : Turns on or off the subwoofer output.
SUB.W  LPF
*1
THROUGH :All signals are sent to the subwoofer. ; LOW  55Hz /
MID  85Hz / HIGH 120Hz :Audio signals with frequencies lower than
55Hz/ 85Hz/ 120Hz are sent to the subwoofer.
FADER
*3
*4
R06 — F06 ( 00 ):Adjusts the front and rear speaker output balance.
BALANCE
*3
L06 — R06 ( 00 ):Adjusts the left and right speaker output balance.
VOL ADJUST –05 — +05 ( 00 ):Presets the volume adjustment level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust. (“VOLADJFIX” appears if FM is selected.)
AMP GAIN LOW  POWER :Limits the maximum volume level to 30. (Select if the
maximum power of each speaker is less than 50W to prevent damaging
the speakers.);
HIGH POWER :The maximum volume level is 50.
D.T.EXP
(Digital Track
Expander)
ON :Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression.;
OFF :Cancels.
TEL  MUTING
*5(For
KD-DB65 )
ON :Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).;
OFF :Cancels.
L/O MODE SUB.W / REAR :Selects whether rear speakers or a subwoofer are
connected to the REAR/SW line out terminals on the rear panel (through
an external amplifier).
*1Displayed only when
[L/O  MODE] is set to [SUB.W] and [SUB.W] is set to
[ON] .
*2Displayed only when
[L/O MODE] is set to [SUB.W] .
*3This adjustment will not affect the subwoofer output.
*4If you are using a two-speaker system, set the fader level to
[00] .
*5Does not work if
[BT ADAPTER] is selected for [AUX] in [SRC SELECT] . ( 4)
DISPLAY SETTINGS
KD-DB65KD-DB95BT
1 Press and hold MENU.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat step
2until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press T/P.
Default: XX
DISPLAY
DIMMER
Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
AUTO :Changes between the day and night adjustments when you turn off
or on the car headlights.*
1
; ON :Selects the night adjustments.; OFF :Selects
the day adjustments.
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT :Select day or night.
2 Select a zone for setting. ( Illustration above)
3 Set the brightness level ( 00 to 31 ).
(Default:
BUTTON ZONE : DAY : 25 ; NIGHT : 09
DISP ZONE : DAY : 31 ; NIGHT : 12 )
SCROLL * 2 ONCE :Scrolls the display information once.; AUTO :Repeats scrolling at
5-second intervals.;
OFF :Cancels.
*1
The illumination control wire connection is required. ( 23)
*2
Some characters or symbols will not be shown correctly (or will be blanked).
JS_JVC_KD-DB95BT_E_f_EN.indd 17JS_JVC_KD-DB95BT_E_f_EN.indd 17 11/22/2013 11:54:30 AM11/22/2013 11:54:30 AM

18
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Default: XX
COLOR (for KD-DB95BT )
PRESET Select a color for
[
BUTTONZONE ].
Default: [
COLOR06 ]
•
COLOR01 to COLOR29
• USER : The color you have
created for [
DAYCOLOR ] or
[
NIGHTCOLOR ] is shown.
•
COLORFLOW01 to
COLORFLOW03 : Color changes
at different speeds.
DAYCOLOR Store your own day and night
colors.
1 RED / GREEN / BLUE :Select a
primary color.
2 00 to 31 :Select the level.
Repeat steps
1 and 2 for all the
primary colors.
• Your setting is stored to
[USER]
in
[PRESET] .
NIGHTCOLOR
MENU COLOR ON
:Changes the button
illumination to white color when
settings are performed on menu
and list search.;
OFF :Cancels.
About discs and audio files
• This unit can only play the following CDs:
• This unit can play back multi-session discs; however, unclosed
sessions will be skipped during playback.
•
Unplayable discs:
- Discs that are not round.
- Discs with coloring on the recording surface or discs that are
dirty.
- Recordable/ReWritable discs that have not been finalized.
- 8 cm CD. Attempting to insert using an adapter may cause
malfunction.
•
DualDisc playback: The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on this
product cannot be recommended.
•
Playable files:
- File extensions: MP3(.mp3), WMA(.wma), AAC (.m4a)
- Bit rate: MP3: 8kbps — 320kbps
WMA: 32kbps — 192kbps
AAC: 8kbps — 320kbps
- Sampling frequency:
MP3: 48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz,
12kHz, 11.025kHz, 8kHz
WMA: 8kHz — 48kHz
AAC: 8kHz — 48kHz
- Variable bit rate (VBR) files.
•
Maximum number of characters for file/folder name:
It depends on the disc format used (includes 4 extension
characters—<.mp3>, <.wma> or <.m4a>).
- ISO 9660 Level 1 and 2: 32 characters
- Romeo: 32 characters
- Joliet: 32 characters
- Windows long file name: 32 characters
About USB devices
• This unit can play MP3/WMA/AAC/WAV files stored on a USB
mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5m may
result in abnormal playback.
• The maximum number of characters for:
- Folder names: 64 characters
- File names: 64 characters
- MP3 Tag: 64 characters
- WMA Tag: 64 characters
- AAC Tag: 64 characters
- WAV Tag: 64 characters
• This unit can recognize a total of 20 480 files, 999 folders (999
files per folder including folder without unsupported files), and
of 8 hierarchies.
• This unit cannot recognize a USB device whose rating is other
than 5V and exceeds 1A.
About iPod/iPhone
• Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• It is not possible to browse video files on the “Videos” menu in
[HEAD MODE] .
• The song order displayed on the selection menu of this unit
may differ from that of the iPod/iPhone.
• If some operations are not performed correctly or as intended,
visit: <http://www.jvc.net/cs/car/>.
About Bluetooth
• Depending on the Bluetooth version of the device, some
Bluetooth devices may not be able to connect to this unit.
• This unit may not work with some Bluetooth devices.
• Signal conditions vary, depending on the surroundings.
MORE INFORMATIONDISPLAY SETTINGS
JS_JVC_KD-DB95BT_E_f_EN.indd 18JS_JVC_KD-DB95BT_E_f_EN.indd 18 2/12/2013 12:04:07 PM2/12/2013 12:04:07 PM