Jvc Kd-r416 User manual

ENGLISH

GET0623-001A

[U/UH]

For canceling the display demonstration, see page 4. /

CD RECEIVER /

KD-R416/KD-R415/

KD-R316/KD-R315

INSTRUCTIONS

For installation and connections, refer to the separate manual.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

CoverRear_KD-R416_001A_f.indd 1-2CoverRear_KD-R416_001A_f.indd 1-2 10/8/09 9:05:08 AM10/8/09 9:05:08 AM

2ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with

optical instruments.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Warning:

If you need to operate the unit while driving,

be sure to look around carefully or you may be

involved in a traffic accident.

For safety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating

the unit.

How to read this manual

The following icons/symbols are used to

indicate:

Press and hold the button(s)

until the desired operation

begins.

Turn the control dial.

Turn the control dial

to make a selection,

then press to confirm.

( XX) Reference page number

<XXXX> Menu setting item

Continued on the next page

[Hold]

EN02-09_KD-R416_001A_2.indd 2EN02-09_KD-R416_001A_2.indd 2 10/2/09 3:21:05 PM10/2/09 3:21:05 PM

3ENGLISH

How to attach/detach the control

panel

How to reset your unit

Your preset adjustments

will also be erased.

How to forcibly eject a disc

• You can forcibly eject the loaded disc even

if the disc is locked. To lock/unlock the disc,

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

CONTENTS

2 How to read this manual

3 How to attach/detach the control

panel

3 How to reset your unit

3 How to forcibly eject a disc

4 Canceling the display

demonstration

4 Setting the clock

5 Preparing the remote controller

(RM-RK50)

6 Basic operations

7 Listening to the radio

8 Listening to a disc

10 Listening to a USB device

(For KD-R416/KD-R415)

11 Listening to the other external

components

12 Selecting a preset sound mode

13 Menu operations

15 Title assignment

16 Maintenance

17 More about this unit

19 Troubleshooting

22 Specifications

[Hold]

EN02-09_KD-R416_001A_f.indd 3EN02-09_KD-R416_001A_f.indd 3 10/23/09 12:30:16 PM10/23/09 12:30:16 PM

4ENGLISH

1 Turn on the power.

Setting the clock

1 Turn on the power.

3 Select <CLOCK>.

4 Select <CLOCK SET>.

5 Adjust the hour.

6 Adjust the minute.

7 Finish the procedure.

4 Select <DEMO OFF>.

6 Finish the procedure.

Canceling the display demonstration

(Initial setting)

[Hold]

(Initial setting)

[Hold]

EN02-09_KD-R416_001A_2.indd 4EN02-09_KD-R416_001A_2.indd 4 10/2/09 3:21:06 PM10/2/09 3:21:06 PM

5ENGLISH

Warning (to prevent accidents and

damage):

• Do not install any battery other than CR2025

or its equivalent.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct

sunlight for a long time.

• Store the battery in a place where children

cannot reach.

• Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

• Do not poke the battery with tweezers or

similar tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

Preparing the remote controller (RM-RK50)

When you use the remote controller for the first

time, pull out the insulation sheet.

If the effectiveness of the remote controller

decreases, replace the battery.

Replacing the lithium coin battery

Caution:

• Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

• Battery shall not be exposed to excessive heat

such as sunshine, fire, or the like.

Insulation

sheet

CR2025

EN02-09_KD-R416_001A_5.indd 5EN02-09_KD-R416_001A_5.indd 5 10/12/09 2:33:59 PM10/12/09 2:33:59 PM

6ENGLISH

Basic operations

Control dialEjects the disc Loading slot

Remote sensor

• DO NOT expose to bright sunlight.

Display window

Auxiliary input jack

Detaches the panel

When you press or hold the following button(s)...

Main unit Remote

controller General operation

Turns on.

• When the power is on, pressing /I/ATT on the remote controller

also mutes the sound or pauses. Press /I/ATT again to cancel

muting or resume playback.

Turns off if pressed and held.

Selects the available sources (if the power is turned on).

• If the source is ready, playback also starts.

Adjusts the volume level.

— Selects items.

—

• Mutes the sound while listening to a source. If the source is “CD“

or “USB,“ playback pauses. Press the control dial again to cancel

muting or resume playback.

• Confirms selection.

Selects the sound mode.

• Enters tone level adjustment directly ( 12) if pressed and held

EQ BASS-TRE

on the main unit.

—Enters playback mode menu directly ( 9).

USB (Universal Serial

Bus) input jack

For KD-R416/

KD-R415

EN02-09_KD-R416_001A_5.indd 6EN02-09_KD-R416_001A_5.indd 6 10/13/09 2:17:25 PM10/13/09 2:17:25 PM

7ENGLISH

Manual search

“M” flashes, then press

the button repeatedly.

When an FM stereo broadcast is

hard to receive

]

<TUNER>

]

<MONO>

]

Reception improves, but stereo effect

will be lost.

To restore the stereo effect, repeat the same

procedure to select <MONO OFF>.

Changing the display information

Station name *

Frequency

Clock

(back to the beginning)

* If no title is assigned to a station, “NO NAME”

appears for a few seconds. To assign a title to a

station, 15.

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

]

<TUNER>

]

<SSM>

]

<SSM 01 – 06> / <SSM 07 – 12> /

“SSM” flashes and local stations with

the strongest signals are searched and

stored automatically.

To preset another 6 stations, repeat the

above procedure by selecting one of the other

6 SSM setting ranges.

Listening to the radio

]

“FM” or “AM”

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Main unit General operation

Returns to the previous menu.

Power off : Checks the current clock time.

Power on : Changes the display information.

[Hold]

EN02-09_KD-R416_001A_5.indd 7EN02-09_KD-R416_001A_5.indd 7 10/13/09 2:17:26 PM10/13/09 2:17:26 PM

8ENGLISH

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6

stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset

number “04.”

]

“92.50MHz”

“PRESET MODE” flashes.

]

Selects preset number “04.”

“P04” flashes and “MEMORY” appears.

Stopping playback and ejecting

the disc

“NO DISC” appears.

Press /

SOURCE

to listen to

another playback source.

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Listening to a disc

]

Turn on the power.

ŸAll tracks will be played repeatedly until you

change the source or eject the disc.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume before

playing a disc to avoid damaging the speakers

by the sudden increase of the output level.

Selecting a preset station

Using the remote controller

∞

: Changes the preset

stations

: Searches for stations

[Hold]

EN02-09_KD-R416_001A_3.indd 8EN02-09_KD-R416_001A_3.indd 8 10/6/09 4:42:22 PM10/6/09 4:42:22 PM

9ENGLISH

Selects folder of the MP3/WMA

Selects track

Fast-forwards or

reverses the track

Selecting a track/folder

For MP3/WMA discs, select the desired folder,

then the desired track by repeating step 2.

• To return to the previous menu, press

BACK

Changing the display information

Disc title/Album name/performer (folder

name)*

Track title (file name)*

Current

track number with the elapsed playing time

Current track number with the clock

time

(back to the beginning)

* If the current disc is an audio CD, “NO NAME”

appears.

If an MP3/WMA file does not have Tag

information or <TAG DISPLAY> is set to

<TAG OFF> ( 13), folder name and file name

appear.

Selecting the playback modes

You can use only one of the following playback

modes at a time.

]

“REPEAT” “RANDOM”

REPEAT

TRACK RPT : Repeats current track

FOLDER RPT : Repeats current folder

RANDOM

FOLDER RND : Randomly plays all tracks

of current folder, then

tracks of next folders

ALL RND : Randomly plays all tracks

To cancel repeat play or random play, select

“RPT OFF” or “RND OFF.”

Using the remote controller

∞

: Selects folder of the

MP3/WMA

: Selects track

[Hold]

: Fast-forwards or

reverses the track

[Hold]

EN02-09_KD-R416_001A_2.indd 9EN02-09_KD-R416_001A_2.indd 9 10/2/09 3:21:08 PM10/2/09 3:21:08 PM

10 ENGLISH

Listening to a USB device (For KD-R416/KD-R415)

This unit can play MP3/WMA tracks stored in a USB device.

]

Turn on the

power.

All tracks will be played repeatedly until you change the

source or detach the USB device.

If a USB device has been attached...

Pressing

/SOURCE

turns on the power and

playback starts from where it has been stopped

previously.

• If a different USB device is currently attached,

playback starts from the beginning.

Stopping playback and detaching

the USB device

Straightly pull it out from the unit.

“NO USB” appears. Press

/SOURCE

to listen to

another playback source.

You can operate the USB device in the same

way you operate the files on a disc. ( 8, 9)

Caution on volume setting:

USB devices produce very little noise compared

with other sources. Lower the volume before

playing a USB device to avoid damaging the

speakers by sudden increase of the output

level.

Cautions:

• Avoid using the USB device if it might hinder

your safety driving.

• Do not pull out and attach the USB device

repeatedly while “READING” is shown on the

display.

• Do not start the car engine if a USB device is

connected.

• This unit may not be able to play the files

depending on the type of USB device.

• Operation and power supply may not work as

intended for some USB devices.

• You cannot connect a computer to the USB

input terminal of the unit.

• Make sure all important data has been backed

up to avoid losing the data.

• Do not leave a USB device in the car, expose

to direct sunlight, or high temperature to

avoid deformation or cause damages to the

device.

• Some USB devices may not work immediately

after attaching USB device or turn on the

power.

• For more details about USB operations, see

pages 18 and 19.

USB input jack

USB memory

EN10-17_KD-R416_001A_5.indd 10EN10-17_KD-R416_001A_5.indd 10 10/14/09 12:52:41 PM10/14/09 12:52:41 PM

11ENGLISH

Listening to the other external

components

You can connect an external component to the

AUX (auxiliary) input jack on the control panel.

Preparation: Make sure <AUX ON> is selected

for the <SRC SELECT>

<AUX IN> setting.

( 15)

• For details, refer also to the instructions

supplied with the adapter or external

components.

]

“AUX IN”

ŸTurn on the connected component

and start playing the source.

]

Adjust the volume.

⁄Adjust the sound as you

want. ( 12)

Connecting an external component to the AUX input jack

3.5 mm stereo mini plug

(not supplied)

Portable audio player,

etc.

EN10-17_KD-R416_001A_2.indd 11EN10-17_KD-R416_001A_2.indd 11 10/2/09 3:20:56 PM10/2/09 3:20:56 PM

12 ENGLISH

Selecting a preset sound mode

You can select a preset sound mode suitable

for the music genre.

FLAT

NATURAL

DYNAMIC

VOCAL BOOST

BASS BOOST

USER

(back to the beginning)

While listening, you can adjust the tone level of

the selected sound mode.

Adjust the level (–06 to +06) of the

selected tone (BASS / MIDDLE / TREBLE).

The sound mode is automatically stored

and changed to “USER.”

Tone Sound element

Frequency Level Q

BASS 60 Hz

80 Hz

100 Hz

200 Hz

–06 to +06 Q1.0

Q1.25

Q1.5

Q2.0

MIDDLE 0.5 kHz

1.0 kHz

1.5 kHz

2.5 kHz

–06 to +06 Q0.75

Q1.0

Q1.25

TREBLE 10.0 kHz

12.5 kHz

15.0 kHz

17.5 kHz

–06 to +06 Q FIX

Storing your own sound mode

You can store your own adjustments in

memory.

]

]

<BASS> / <MIDDLE> /

Adjust the sound elements of the

selected tone. ( table on the left)

4Repeat steps 2and 3to adjust other

tones.

The adjustments made will be stored

automatically in “USER.”

The current sound mode changes to “USER”

automatically.

[Hold]

EN10-17_KD-R416_001A_2.indd 12EN10-17_KD-R416_001A_2.indd 12 10/2/09 3:20:56 PM10/2/09 3:20:56 PM

13ENGLISH

Menu operations

1 2 3 Repeat step 2if necessary.

• To return to the previous menu,

press

BACK

• To exit from the menu, press

DISP

Category

Menu item Selectable setting, [ Initial: Underlined ]

AUDIO

BEEP • BEEP ON

• BEEP OFF

: Activates the keypress tone.

: Deactivates the keypress tone.

AMP GAIN *7

Amplifier gain

control

• LOW POWER

• HIGH POWER

: VOLUME 00 – VOLUME 30 (Select if the

maximum power of each speaker is less than

50 W to prevent damaging the speakers.)

: VOLUME 00 – VOLUME 50

SRC SELECT

AM *8

AM station

• AM ON

• AM OFF

: Enable “AM” in source selection.

: Disable “AM” in source selection.

AUX IN *9

Auxiliary input

• AUX ON

• AUX OFF

: Enable “AUX IN” in source selection.

: Disable “AUX IN” in source selection.

*7 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the

volume level is set higher than “VOLUME 30.”

*8 Displayed only when any source other than “AM” is selected.

*9 Displayed only when any source other than “AUX IN” is selected.

You can assign titles to 30 station frequencies

(FM and AM) using 8 characters (maximum) for

each title.

• If you try to assign titles to more than 30

station frequencies, “NAME FULL” appears.

Delete unwanted titles before assignment.

]

“FM” or “AM”

]

Show the title entry screen.

]

Select a character.

]

Move to the next (or previous)

character position.

[Hold]

Title assignment

5Repeat steps 3and 4until you have

finished entering the title.

To erase the entire title

In step 2on the left column...

Available characters

ABCDEFGH I

J KLMNOPQR

STUVWXYZ0

123456789

—/ <> Space

EN10-17_KD-R416_001A_2.indd 15EN10-17_KD-R416_001A_2.indd 15 10/2/09 3:20:56 PM10/2/09 3:20:56 PM

16 ENGLISH

To keep discs clean

A dirty disc may not play

correctly. If a disc does become

dirty, wipe it with a soft cloth

in a straight line from center to

edge.

• Do not use any solvents (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean discs.

To play new discs

New discs may have some

rough spots around the inner

and outer edges. If such a disc

is used, this unit may reject the

disc.

To remove these rough spots, rub the edges

with a pencil or ball-point pen, etc.

Do not use the following discs:

Single CD (8 cm disc) Warped disc

Sticker and sticker

residue Stick-on label

Unusual shape

C-thru Disc

(semitransparent

disc)

Transparent or

semitransparent

parts on its recording

area

Maintenance

How to clean the connectors

Frequent detachment will deteriorate the

connectors.

To minimize this possibility, periodically wipe

the connectors with a cotton swab or cloth

moistened with alcohol, being careful not to

damage the connectors.

Moisture condensation

Moisture may condense on the lens inside the

unit in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the unit may malfunction.

In this case, eject the disc and leave the unit

turned on for a few hours until the moisture

has evaporated.

How to handle discs

When removing a disc

from its case, press down

the center holder of the case

and lift the disc out, holding

it by the edges.

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc in its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs in cases after use.

Connectors

Center holder

EN10-17_KD-R416_001A_2.indd 16EN10-17_KD-R416_001A_2.indd 16 10/2/09 3:20:56 PM10/2/09 3:20:56 PM

17ENGLISH

More about this unit

Basic operations

General

• If you turn off the power while listening to

a track, playback will start from where it had

been stopped previously next time you turn

on the power.

• If no operation is done for about 60 seconds

after pressing

button, the operation will

be canceled.

Tuner operations

Storing stations in memory

• During SSM search...

–All previously stored stations are erased and

the stations are stored anew.

–When SSM is over, the station stored in the

lowest preset number will be automatically

tuned in.

• When storing a station manually, the

previously preset station is erased when

a new station is stored in the same preset

number.

Disc operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does not

comply with the “Compact Disc Digital Audio”

standard. Therefore, the use of Non-DVD side

of a DualDisc on this product may not be

recommended.

General

• This unit has been designed to reproduce

CDs/CD Texts, and CD-Rs (Recordable)/CD-

RWs (Rewritable) in audio CD (CD-DA), MP3

and WMA formats.

• If you change the source while listening to a

disc, playback stops. Next time you select “CD”

as the playback source, playback will start

from where it had been stopped previously.

• When a disc is inserted upside down, “PLEASE”

and “EJECT” appear alternately on the display.

Press

to eject the disc.

• If the ejected disc is not removed within

15 seconds, it is automatically inserted into

the loading slot again to protect it from dust.

• MP3 and WMA “tracks” (words “file” and “track”

are used interchangeably) are recorded in

“folders.”

• While fast-forwarding or reversing on an MP3

or WMA disc, you can only hear intermittent

sounds.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.

• This unit can only play back files of the same

type as those detected first if a disc includes

both audio CD (CD-DA) files and MP3/WMA

files.

• This unit can play back multi-session discs;

however, unclosed sessions will be skipped

while playing.

• Some CD-Rs or CD-RWs may not play back on

this unit because of their disc characteristics,

or for the following reasons:

–Discs are dirty or scratched.

–Moisture condensation has occurred on the

lens inside the unit.

–The pickup lens inside the unit is dirty.

–The files on the CD-R/CD-RW are written

using the “Packet Write” method.

–There are improper recording conditions

(missing data, etc.) or media conditions

(stained, scratched, warped, etc.).

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower than

that of regular CDs.

EN10-17_KD-R416_001A_4.indd 17EN10-17_KD-R416_001A_4.indd 17 10/12/09 2:28:24 PM10/12/09 2:28:24 PM

18 ENGLISH

• Do not use the following CD-Rs or CD-RWs:

–Discs with stickers, labels, or a protective seal

stuck to the surface.

–Discs on which labels can be directly printed

by an ink jet printer.

Using these discs under high temperature

or high humidity may cause malfunctions or

damage to the unit.

Playing an MP3/WMA disc

• This unit can play back MP3/WMA files with

the extension code <.mp3> or <.wma>

(regardless of the letter case—upper/lower).

• This unit can show the names of albums,

artists (performer), and Tag (Version 1.0, 1.1,

2.2, 2.3, or 2.4) for MP3 files and for WMA files.

• This unit can display only one-byte characters.

No other characters can be correctly

displayed.

• This unit can play back MP3/WMA files

meeting the conditions below:

–Bit rate:

MP3: 32 kbps — 320 kbps

WMA: 32 kbps — 192 kbps

–Sampling frequency of MP3:

32 kHz, 44.1 kHz, 48kHz (for MPEG-1)

16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)

–Sampling frequency of WMA:

22.05 kHz, 32 kHz, 44.1 kHz, 48kHz

–Disc format: ISO 9660 Level 1/Level 2,

Romeo, Joliet, Windows extension

• The maximum number of characters for

file/folder names (includes 4 extension

characters—<.mp3> or <.wma>): 12 — 128

characters (depending on the media used,

etc.).

• This unit can recognize a total of 512 files, 255

folders, and 8 hierarchical levels.

• This unit can play back files recorded in VBR

(variable bit rate).

Files recorded in VBR have a discrepancy

in the elapsed time display, and do not

show the actual elapsed time. In particular,

this difference becomes noticeable after

performing the search function.

• This unit cannot play back the following files:

–MP3 files encoded in MP3i and MP3 PRO

format.

–MP3 files encoded in an inappropriate

format.

–MP3 files encoded with Layer 1/2.

–WMA files encoded in lossless, professional,

and voice format.

–WMA files which are not based upon

Windows Media ® Audio.

–WMA files copy-protected with DRM.

–Files which have data such as AIFF, ATRAC3,

etc.

• The search function works but search speed is

not constant.

Playing MP3/WMA tracks from a USB

device (for KD-R416/KD-R415)

• While playing from a USB device, the playback

order may differ from other players.

• This unit may be unable to play back some

USB devices or some files due to their

characteristics or recording conditions.

• Depending on the shape of the USB devices

and connection ports, some USB devices may

not be attached properly or the connection

might be loose.

• Connect one USB mass storage class device to

the unit at a time. Do not use a USB hub.

• If the connected USB device does not have

the correct files, “CANNOT PLAY” appears.

• This unit can show Tag (Version 1.0, 1.1, 2.2,

2.3, or 2.4) for MP3 files and for WMA files.

• This unit can play back MP3/WMA files

meeting the conditions below:

EN18-23_KD-R416_001A_f.indd 18EN18-23_KD-R416_001A_f.indd 18 10/15/09 5:09:43 PM10/15/09 5:09:43 PM

19ENGLISH

–Bit rate of MP3/WMA: 32 kbps — 320 kbps

–Sampling frequency of MP3:

32 kHz, 44.1 kHz, 48 kHz (for MPEG-1)

16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)

–Sampling frequency of WMA:

22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz

• This unit can play back MP3 files recorded in

VBR (variable bit rate).

• The maximum number of characters for:

–Folder names : 32 characters

–File names : 32 characters

–MP3 Tag : 64 characters

–WMA Tag : 32 characters

• This unit can recognize a total of 5 000 files,

255 folders (255 files per folder including

folder without unsupported files), and of 8

hierarchies.

• This unit does not support SD card reader.

• This unit cannot recognize a USB device

whose rating is other than 5 V and exceeds

500 mA.

• USB devices equipped with special functions

such as data security functions cannot be

used with the unit.

• Do not use a USB device with 2 or more

partitions.

• This unit may not recognized a USB device

connected through a USB card reader.

• This unit may not play back files in a USB

device properly when using a USB extension

cord.

• This unit cannot play back the following files:

–MP3 files encoded with MP3i and MP3 PRO

format.

–MP3 files encoded in an inappropriate

format.

–MP3 files encoded with Layer 1/2.

–WMA files encoded in lossless, professional,

and voice format.

–WMA files not based on Windows Media®

Audio.

Troubleshooting

Symptom Remedy/Cause

General

Sound cannot be heard from the

speakers.

• Adjust the volume to the optimum level.

• Make sure the unit is not muted/paused ( 6).

• Check the cords and connections.

“PROTECT” appears on the display

and no operations can be done.

Check to be sure the terminals of the speaker leads

are covered with insulating tape properly, then

reset the unit ( 3).

If “PROTECT” does not disappear, consult your JVC

car audio dealer or a company supplying kits.

The unit does not work at all. Reset the unit. ( 3)

“AUX” cannot be selected. Check the <SRC SELECT>

<AUX IN> setting.

( 15)

FM/AM

SSM automatic presetting does

not work.

Store stations manually.

Static noise while listening to the

radio.

Connect the antenna firmly.

“AM” cannot be selected. Check the <SRC SELECT>

<AM> setting. ( 15)

EN18-23_KD-R416_001A_5.indd 19EN18-23_KD-R416_001A_5.indd 19 10/13/09 2:29:28 PM10/13/09 2:29:28 PM

20 ENGLISH

Symptom Remedy/Cause

Disc playback

Disc cannot be played back. Insert the disc correctly.

• CD-R/CD-RW cannot be played

back.

• Tracks on the CD-R/CD-RW

cannot be skipped.

• Insert a finalized CD-R/CD-RW.

• Finalize the CD-R/CD-RW with the component

which you used for recording.

Disc can neither be played back

nor ejected.

• Unlock the disc. ( 8)

• Eject the disc forcibly. ( 3)

Disc sound is sometimes

interrupted.

• Stop playback while driving on rough roads.

• Change the disc.

• Check the cords and connections.

“NO DISC” appears on the display. Insert a playable disc into the loading slot.

“PLEASE” and “EJECT“ appear

alternately on the display.

Press

, then insert a disc correctly.

MP3/WMA playback

Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a

format compliant with ISO 9660 Level 1, Level 2,

Romeo, or Joliet.

• Add the extension code <.mp3> or <.wma> to the

file names.

Noise is generated. Skip to another track or change the disc. (Do not

add the extension code <.mp3> or <.wma> to

non-MP3 or WMA tracks.)

A longer readout time is required

(“READING” keeps flashing on the

display).

Do not use too many hierarchical levels and folders.

Tracks do not play back in the order

you have intended them to play.

The playback order is determined when the files are

recorded.

The elapsed playing time is not

correct.

This sometimes occurs during playback. This is

caused by how the tracks are recorded on the disc.

For KD-R416/KD-R415: “NO FILE”

appears on the display.

Selected folder is an empty folder *. Select another

folder that contains MP3/WMA tracks.

* Folder that is physically empty or folder that contains

data but does not contain valid MP3/WMA track.

“NOT SUPPORT” appears on the

display and track skips.

Skip to the next track encoded in an appropriate

format or to the next non-copy-protected WMA

track.

The correct characters are not

displayed (e.g. album name).

This unit can only display letters (upper case),

numbers, and a limited number of symbols.

EN18-23_KD-R416_001A_4.indd 20EN18-23_KD-R416_001A_4.indd 20 10/7/09 10:42:54 AM10/7/09 10:42:54 AM

This manual suits for next models

Table of contents

Popular Car Receiver manuals by other brands

Scion

Scion PT546-00120 Assembly

Kenwood

Kenwood KRC-PS959R instruction manual

Naxa

Naxa NCD-705 user manual

Philips

Philips CID3685 user manual

Kenwood

Kenwood KDC-4054UR instruction manual

Lanzar

Lanzar VBD400 instruction manual

Blaupunkt

Blaupunkt 470 DAB Series Operating and installation

Kenwood

Kenwood DPX-8020MD Service manual

Sony

Sony CDX-CA710X Addendum to Service manual

Kenwood

Kenwood KRC-1006 instruction manual

Axxera

Axxera AXV3D Installation & owner's manual

Sony

Sony XR-C100 operating instructions

Alpine

Alpine IVE-W530E owner's manual

Hyundai

Hyundai H-CMD7075 instruction manual

Aiwa

Aiwa CT-X432M operating instructions

Pioneer

Pioneer X-EM26 operating instructions

PEEKTON

PEEKTON PKM700 RDS manual

Sony

Sony CDX-GT610U Service manual

JVC KD-R416 User manual

Popular Car Receiver manuals by other brands