JVC XG700 KW-XG700 User manual

ENGLISHESPAÑOL
FRANÇAIS
CD RECEIVER KW-XG700
RECEPTOR CON CD KW-XG700
RÉCEPTEUR CD KW-XG700
For canceling the display demonstration, see page 4.
Para cancelar la demostración en pantalla, consulte la página 4.
Pour annuler la démonstration des affichages, référez-vous à la page 4.
For installation and connections, refer to the separate manual.
Para la instalación y las cone iones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
GET0457-001A
[J]
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
reference.
Model No.
Serial No.
Cover_KW-XG700[J]1.indd 1Cover_KW-XG700[J]1.indd 1 2/27/07 2:40:53 PM2/27/07 2:40:53 PM

ENGLISH
2
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital de ice, pursuant to Part
15 of the FCC Rules. These limits are designed to pro ide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Howe er, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or tele ision reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the recei ing antenna.
– Increase the separation between the equipment and recei er.
– Connect the equipment into an outlet on a circuit different from that to which the recei er is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not appro ed by JVC could oid the user’s authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top co er. There are no user ser iceable parts inside the unit; lea e all ser icing to
qualified ser ice personnel.
3. CAUTION: (For U.S.A.) Visible and/or in isible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or in isible class 1M laser radiation when open. Do not iew directly with
optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
[European Union only]
For safety...
• Do not raise the olume le el too much, as this will
block outside sounds, making dri ing dangerous.
• Stop the car before performing any complicated
operations.
Te perature inside the car...
If you ha e parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
Warning:
If you need to operate the unit while dri ing, be sure to
look around carefully or you may be in ol ed in a traffic
accident.
EN02-07_KW-XG700[J]1.indd 2EN02-07_KW-XG700[J]1.indd 2 2/27/07 2:39:57 PM2/27/07 2:39:57 PM

ENGLISH
3
How to reset your unit
• Your preset adjustments will also be erased (except
the registered Bluetooth device, see page 12).
How to forcibly eject a disc
• Be care ul not to drop the disc when it ejects.
• I this does not work, reset your unit.
How to use the MODE button
If you press MODE, the unit goes into functions
mode, then the number buttons and 5/∞ buttons
work as different function buttons.
This unit is equipped with the steering whee
remote contro function.
• See the Insta ation/Connection Manua (separate
vo ume) for connection.
[Within 5 seconds...]
CONTENTS
INTRODUCTIONS
Preparation ...................................... 4
OPERATIONS
Basic operations ................................ 5
• sing the control panel ................ 5
• sing the remote controller
(RM-RK50) ................................... 6
Listening to the radio ......................... 8
Disc operations .................................. 9
EXTERNAL DEVICES
Listening to the SB device ................. 11
sing the Bluetooth ® devices .............. 12
• sing the Bluetooth cellular
phone ......................................... 14
• sing the Bluetooth audio
player ......................................... 16
Listening to the CD changer ................ 17
Listening to the satellite radio ............ 19
Listening to the iPod / D. player .......... 21
Listening to the other external
components ................................... 22
SETTINGS
Selecting a preset sound mode ............ 24
General settings — PSM ..................... 25
Bluetooth settings ............................. 28
Assigning titles .................................. 29
REFERENCES
Maintenance ..................................... 30
More about this unit .......................... 31
Troubleshooting ................................ 35
Specifications .................................... 40
EN02-07_KW-XG700[J]f.indd 3EN02-07_KW-XG700[J]f.indd 3 3/29/07 2:49:01 PM3/29/07 2:49:01 PM

ENGLISH
4INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 26.
~ Turn on the power.
Ÿ Enter the PSM settings.
! ] ⁄ Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK H” (hou ), then adjust the hou .
Select “CLOCK M” (minute), then adjust the minute.
@ Finish the procedure.
Caution on volume setting:
Digital devices (CD/USB) p oduce ve y little noise compa ed with othe sou ces. Lowe the volume befo e playing
these digital devices to avoid damaging the speake s by the sudden inc ease of the output level.
When the powe is tu ned off: Check the cu ent clock time
When the powe is tu ned on: Change the display info mation
EN02-07_KW-XG700[J]3.indd 4EN02-07_KW-XG700[J]3.indd 4 3/14/07 11:36:26 AM3/14/07 11:36:26 AM

ENGLISH
5OPERATIONS
Basic operations
Using the control panel
1 • FM/AM: Select preset station.
• SIRIUS/XM: Select category.
• CD/USB/CD-CH: Select folder.
• IPOD/D.PLAYER: Enter the main menu/Pause or
stop playback/Confirm selection.
• BT-PHONE/BT-AUDIO: Enter setting menu/
Confirm selection.
2 • Turn on the power.
• Turn off the power Hold].
• Attenuate the sound (if the power is on).
3 • FM/AM/SIRIUS/XM: Search for station/channel.
• CD/USB/CD-CH: Select track.
• IPOD/D.PLAYER: Select track.
• BT-PHONE/BT-AUDIO: Select setting item/
Select a registered device.
4 Loading slot
5 Display window
6 Select the source.
FM/AM = SIRIUS */XM * = CD * = USB *
= CD-CH */IPOD */D.PLAYER * (or EXT IN) =
BT-PHONE * (Bluetooth Phone) = BT-AUDIO *
(Bluetooth Audio) = AUX IN = (back to the
beginning)
* You cannot select these sources if they are not
ready or not connected.
7 Eject disc.
8 Select the bands.
9 Reset button
p • FM/AM/SIRIUS/XM: Select preset station/
channel.
• CD/USB/CD-CH: Select folder/track/disc (for CD
changer).
• BT-PHONE: Select preset phone number.
q Enter functions mode.
Press MODE, then one of the following buttons
(within 5 seconds)...
MO : Turn on/off monaural reception.
SSM : Automatic station presetting Hold].
RPT : Select repeat play.
RND : Select random play.
5 / ∞ : Skip 10 tracks.
w Volume control Turn].
e • Enter the PSM settings Hold].
• Adjust the sound mode.
r Select the sound mode.
t AUX (auxiliary) input jack
y USB (Universal Serial Bus) input terminal
u Change the display information.
EN02-07_KW-XG700[J]f.indd 5EN02-07_KW-XG700[J]f.indd 5 4/3/07 8:59:26 AM4/3/07 8:59:26 AM

ENGLISH
6
Before usin the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Display window
Using the remote controller (RM-RK50)
Installin the lithium coin battery (CR2025)
Remote sensor
1 Playback source indicators
2 Track information indicators
3 Main display
(Menu, playback information)
4 Tuner reception indicators
5 Playback mode/item indicators
(Random/Repeat)
6 • Spectrum analyzer meter
• Volume level indicator
7 Sound mode indicators
8 Equalizer indicator
9 Loudness indicator
p Clock indicator
q Analyzer indicator
w Bluetooth indicator
e Track indicator
r Source display/Preset No./Track No./Folder No./
Disc No.
t Status of Bluetooth device
(Device number, 1 – 5]; signal strength, 0 – 3]*;
battery reminder, 0 – 3]*)
* As the number increases, the signal/battery
strength becomes stronger.
EN02-07_KW-XG700[J]f.indd 6EN02-07_KW-XG700[J]f.indd 6 3/28/07 5:32:22 PM3/28/07 5:32:22 PM

ENGLISH
7OPERATIONS
Warning:
To prevent accidents and damage
• Do not install any battery other than CR2025 or
its equi alent.
• Do not lea e the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
• Do not lea e the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or sa ing it.
For USA-California Only:
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special
handling may apply.
See www.dtsc.ca.go /hazardouswaste/perchlorate
1 • Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 • Changes the FM/AM bands with 5 U.
• Changes the preset stations with D ∞.
• Changes the folder of the MP3/WMA/AAC/WAV.
• While playing an MP3 disc on an
MP3-compatible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to the satellite (SIRIUS or XM)
radio:
– Changes the categories.
• While listening to an Apple iPod or a JVC
D. player:
– Pauses/stops or resumes playback with D ∞.
– Enters the main menu with 5 U.
(Now 5 U/D ∞/2 R/F 3 work as the menu
selecting buttons.)*
* 5 U : Returns to the previous menu.
D ∞ : Con irms the selection.
3 Adjusts the olume le el.
4 Selects the sound mode (iEQ: intelligent equalizer).
5 Selects the source.
6 For Bluetooth cellular phone:
– Answers calls if pressed briefly.
– Rejects calls if pressed and held.
7 • Searches for stations if pressed briefly.
• Fast-forwards or re erses the track if pressed and
held.
• Changes the tracks if pressed briefly.
• While listening to the satellite radio:
– Changes the channels if pressed briefly.
– Changes the channels rapidly if pressed and
held.
• While listening to an iPod or a D. player (in menu
selecting mode):
– Selects an item if pressed briefly. (Then, press
D ∞ to confirm the selection.)
– Skips 10 items at a time if pressed and held.
• Re erse skip/forward skip for Bluetooth audio.
EN02-07_KW-XG700[J]1.indd 7EN02-07_KW-XG700[J]1.indd 7 2/27/07 2:40:01 PM2/27/07 2:40:01 PM

ENGLISH
8
Listening to the radio
Change the display information
~ Select “FM/AM.”
Ÿ Select the bands.
! Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly.
* If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 29.
Select preset station.
When an FM stereo broadcast is hard
to receive
1
2
Reception improves, but stereo effect will be lost.
• M indicator lights up.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1
2
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
EN08-13_KW-XG700[J]2.indd 8EN08-13_KW-XG700[J]2.indd 8 3/9/07 11:29:31 AM3/9/07 11:29:31 AM

ENGLISH
9OPERATIONS
Continued on the next page
3
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset number
4 of the FM1 band.
1
2
3
Disc operations
Insert the disc.
Playback starts automatically.
Change the display information
MP3/WMA/AAC: Album name/performer (folder name *1) =
Track title (file name *1) = Elapsed playing time and Current
track number = (back to the beginning)
Audio CD/CD Text: Disc title/performer *2 = Track title *2 =
Elapsed playing time and Current track number = (back to the
beginning)
*1 If the file does not ha e Tag information
or “TAG DISP” is set to “TAG OFF” (see
page 27), folder name and file name
appear. TAG indicator will not light up.
*2 “NO NAME” appears for an audio CD.
EN08-13_KW-XG700[J]2.indd 9EN08-13_KW-XG700[J]2.indd 9 3/9/07 11:29:33 AM3/9/07 11:29:33 AM

ENGLISH
10 OPERATIONS
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
To stop play and eject the disc
• Press SOURCE to listen to another
playback source.
Pressing (or holding) the ollowing buttons allows you to...
Disc type *1
(Number buttons) *2
MP3/WMA/
AAC
Press: Select track
Hold: Reverse/ ast- orward
track
Select older Locate particular older
directly *3
Audio CD/
CD Text
Press: Select track
Hold: Reverse/ ast- orward
track
—
Locate particular track directly
*1 This unit can playback AAC files encoded using iTunes.
*2 Press to select number 1 to 6; hold to select number to 12.
*3 It is required that folders be assigned with 2-digit numbers at the beginning of their folder names—01, 02, 03, and
so on.
A ter pressing MODE, press the ollowing buttons to...
Disc type
MP3/WMA/
AAC
Skip 10 tracks (within
the same older)
TRK RPT:
Repeat current track
F DR RPT:
Repeat current older
F DR RND:
Randomly play all tracks o
current older, then tracks o
next olders
DISC RND:
Randomly play all tracks
Audio CD/
CD Text
Skip 10 tracks TRK RPT:
Repeat current track
DISC RND:
Randomly play all tracks
• To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”
EN08-13_KW-XG700[J]f.indd 10EN08-13_KW-XG700[J]f.indd 10 3/28/07 5:32:53 PM3/28/07 5:32:53 PM

ENGLISH
11EXTERNAL DEVICES
Listening to the USB device
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *1, portable HDD, etc. to
the unit.
*1 You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices.
Attaching a USB memory
his unit can play MP3/WMA/WMA-DRM10 *1/AAC *2/WAV tracks stored in a USB device.
*1 See page 3 .
*2 This unit can play back AAC files encoded using iTunes. This unit cannot play back AAC files purchased from iTunes
Store.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while “CHECK” is flashing on the
display.
• Do not start the car engine if a USB device is
connected.
• Stop play back before disconnecting a USB device.
• his unit may not be able to play the files
depending on the type of USB device.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up
to avoid losing the data.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
If a USB device has been attached...
Playback starts from where it has
been stopped previously.
• If a different USB device is
currently attached, playback
starts from the beginning.
To stop play and detach the USB device
Straightly pull it out from the unit.
• Press SOURCE to listen to another playback source.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 9 and 10.)
• You can listen to WAV files by following the MP3/
WMA/AAC files operations listed on pages 9 and 10.
USB input terminal
USB memory
EN08-13_KW-XG700[J]f.indd 11EN08-13_KW-XG700[J]f.indd 11 3/21/07 2:37:37 PM3/21/07 2:37:37 PM

ENGLISH
12
Using the Bluetooth ® devices
For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on
the rear of this unit. See also page 23.
• Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the countries where you may use the Bluetooth® function.
To use a Bluetooth device through the unit (“BT-PH NE” and “BT-AUDI ”) for the first time, you need to establish
Bluetooth wireless connection between the unit and the device.
• nce the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be
registered in total.
• nly one device can be connected at a time for each source (“BT-PH NE” and “BT-AUDI ”).
Registering a Bluetooth device
3 Select “OPEN.”
4 Enter a PIN (Personal Identification
Number) code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
* Some de ices ha e their own PIN code. Enter the
specified PIN code to the unit.
1 Move to the next (or previous) number
position.
2 Select a number or blank space.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
“ PEN...” flashes on the display.
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select “BT-PH NE” or “BT-AUDI ” as the source to
operate the Bluetooth menu.
OPEN Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
SEARCH Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
Registering using “OPEN”
Preparation
perate the device to turn on its Bluetooth function.
1 Select “BT-PHONE” or “BT-AUDIO.”
2 Select “NEW.”
EN08-13_KW-XG700[J]1.indd 12EN08-13_KW-XG700[J]1.indd 12 2/27/07 2:39:39 PM2/27/07 2:39:39 PM

ENGLISH
13EXTERNAL DEVICES
2 Select a device you want to connect.
3 Use “OPEN’ or “SEARCH’ to connect.
o connect/disconnect a registered device
1 Select “BT-PHONE” or “BT-AUDIO.”
2 Select a registered device you want to
connect/disconnect.
3 Select “CONNECT” or “DISCNNCT” to connect/
disconnect the selected device.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (See
“AUT CNT” on page 28.)
o delete a registered device
1 Select “BT-PHONE” or “BT-AUDIO.”
2 Select a registered device you want to delete.
3 Select “DELETE,” then “YES” to delete the
selected device.
5 Use the Bluetooth device to search and
connect.
n the device to be connected, enter the same PIN
code you have just entered for this unit. “C NNECT”
flashes on the display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use “C NNECT“ (or activate
“AUT CNT”) to connect the same device from next
time. (See the right column and page 28.)
o search for available devices
Perform steps 1 and 2 on page 12, then...
1 Select “SEARCH.”
The unit searches and displays the list of the
available devices.
• If no available device is detected, “UNF UND”
appears.
2 Select a device you want to connect.
3 Enter the specific PIN code of the device to
the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
4 Use the Bluetooth device to connect.
Now connection is established and you can use the
device through the unit.
o connect a special device
Perform steps 1 and 2 on page 12, then...
1 Select “SPECIAL.”
The unit displays the list of the preset devices.
EN08-13_KW-XG700[J]1.indd 13EN08-13_KW-XG700[J]1.indd 13 2/27/07 2:39:40 PM2/27/07 2:39:40 PM

ENGLISH
14
When a call comes in....
The source is automatically changed to “BT-PHONE.”
When “AUTO ANS” (answer) is activated....
The unit answers the incoming calls automatically, see
page 8.
• When “AUTO ANS” (answer) is deactivated, press any
button (except /control dial) to answer the
incoming call.
To end the call
Hold any button (except /control dial).
• You can adjust the microphone volume level (see
page 8).
When a text message comes in....
If the cellular phone is compatible with text message
and “MSG INFO” (message info) is set to “AUTO” (see
page 8), the unit rings and “RCV MSG” (receiving
message) appears on the display to inform you the
arrival of the message.
Using the Bluetooth cellular phone
~ Select “BT-PHON .”
Ÿ nter Bluetooth menu.
! Make a call or settings using the Bluetooth menu. (See pages 15 and 28.)
Return to the device list menu
EN14-21_KW-XG700[J]3.indd 14EN14-21_KW-XG700[J]3.indd 14 3/13/07 5:30:10 PM3/13/07 5:30:10 PM

ENGLISH
15EXTERNAL DEVICES
Making a call
You can make a call using the following methods.
Select “BT-PHONE,” then follow the following steps to make a call:
12 3 (unless mentioned otherwise)
Call history Display the Dial
Menu.
Select a call history.
REDIAL, RECEIVED, MISSED
Select a name (if it is acquired) or
phone number.
Phone book Select “PH BOOK.”
The list of phone number appears.
Select a name from the list.
Direct dialing Select “NUMBER.” Enter the phone number.
Voice
command
1 “SAY NAME” appears on the display.
2 Speak the name you want to call.
• You can also use voice command from the Dial Menu. Select “VOICE” from the Dial Menu.
• If your cellular phone does not support the voice recognition system, “ERROR” appears on the
display.
Preset phone
number
See page 16 for settings.
EN14-21_KW-XG700[J]1.indd 15EN14-21_KW-XG700[J]1.indd 15 2/27/07 2:39:48 PM2/27/07 2:39:48 PM

ENGLISH
16
Using the Bluetooth audio player
~ Select “BT-AUDIO.”
If playback did not start automatically, operate the Bluetooth audio player to start playback.
• Refer also to page 13 for connecting/disconnecting/deleting a registered device.
* Operation may be different according to the connected phone.
Bluetooth Information:
If you wish to receive more information a out Bluetooth, visit our JVC we site.
Presetting the phone number
ou can preset up to six phone numbers.
1 Display the Dial Menu.
2 Select “PH BOOK,“ “MISSED,” or
“RECEIVED” whichever you want to use.
3 Select a phone num er.
4
Reverse skip/forward skipPause/start play ack*
Enter setting menu (Device list)
EN14-21_KW-XG700[J]3.indd 16EN14-21_KW-XG700[J]3.indd 16 3/13/07 5:31:25 PM3/13/07 5:31:25 PM

ENGLISH
17EXTERNAL DEVICES
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD
changer jack on the rear of the unit. See also page 3.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Preparation
Make sure “CHANGER” is selected for the external input setting, see page 7.
~ Select “CD-CH.”
Ÿ Select a disc to start playing.
Press: For selecting disc number 1 – 6.
Hold: For selecting disc number 7 – 1 .
Pressing (or holding) the following buttons allows you to...
Disc type
Press: Select track
Hold: Reverse/fast-forward track
Select folder
Press: Select track
Hold: Reverse/fast-forward track —
Change the display information
(see page 9)
Continued on the next page
EN14-21_KW-XG700[J]1.indd 17EN14-21_KW-XG700[J]1.indd 17 2/27/07 2:39:49 PM2/27/07 2:39:49 PM

ENGLISH
18
After pressing MODE, press the following buttons to...
Disc type
Skip 10 tracks (within
the same fol er)
TRK RPT:
Repeat current track
FLDR RPT:
Repeat all tracks of current fol er
DISC RPT:
Repeat all tracks of the current
isc
FLDR RND:
Ran omly play all tracks of
current fol er, then tracks of
next fol ers
DISC RND:
Ran omly play all tracks of
current isc
MAG RND:
Ran omly play all tracks of the
inserte iscs
Skip 10 tracks TRK RPT:
Repeat current track
DISC RPT:
Repeat all tracks of the current
isc
DISC RND:
Ran omly play all tracks of
current isc
MAG RND:
Ran omly play all tracks of the
inserte iscs
• To cancel repeat play or ran om play, select “RPT OFF” or “RND OFF.”
EN14-21_KW-XG700[J]f.indd 18EN14-21_KW-XG700[J]f.indd 18 3/28/07 5:33:19 PM3/28/07 5:33:19 PM

ENGLISH
19EXTERNAL DEVICES
Before operating, connect either one of the following
(separately purchased) to the CD changer jack on the
rear of this unit. See also page 23.
JVC SIRIUS radio DLP—Down Link Processor, for
listening to the SIRIUS Satellite radio.
XMDirect™ Universal Tuner Box—Using a JVC
Smart Digital Adapter (XMDJVC100: not supplied), for
listening to the XM Satellite radio.
Refer also to the Instructions supplied with your
SIRIUS Satellite radio or XM Satellite radio.
GCI (Global Control Information) update
If channels are updated after subscription, updating
starts automatically.
“UPDATING” flashes and no sound can be heard.
Update takes a few minutes to complete.
During update, you cannot operate your satellite
radio.
Activate your SIRIUS subscription after
connection
1
2
JVC DLP starts updating all the SIRIUS channels.
Once completed, JVC DLP tunes in to the preset
channel, CH184.
3 Check our SIRIUS ID, see page 26.
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate our subscription, or ou can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
“SUB UPDT PRESS ANY KEY” scrolls on the display
once subscription has been completed.
Activate your XM subscription after connection
Only Channel 0, 1, and 247 are available before
activation.
1
2
XMDirect™ Universal Tuner Box starts updating
all the XM channels. “Channel 1” is tuned in
automatically.
3 Check our XM Satellite radio ID labelled on
the casing of the XMDirect™ Universal Tuner
Box, or tune in to “Channel 0” (see page 20).
4 Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate our subscription, or ou can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
Continued on the next page
Listening to the satellite radio
EN14-21_KW-XG700[J]2.indd 19EN14-21_KW-XG700[J]2.indd 19 3/9/07 11:33:16 AM3/9/07 11:33:16 AM

ENGLISH
20
~ Select “SIRIUS” or “XM.”
Ÿ Select the bands.
SIRIUS:
XM:
! Select a category.
⁄ Select a channel to listen.
• Holding the button changes the channels rapidly.
• SIRIUS: If you select “A ” in step !, you can tune in to all the channels of all categories.
• XM: If you do not select a channel within 15 seconds, category selected in step ! is canceled. You can select
all channels of all categories now (including non-categorised channels).
• While searching, invalid and unsubscribed channels are skipped.
Checking the XM Satellite radio ID
While selecting “XM1,” “XM2,” or “XM3,” select
“Channel .”
The display alternately shows “RADIO ID” and the
8-digit (alphanumeric) ID number.
To cancel the ID number display, select any channel
other than “Channel 0.”
Storing channels in memory
You can preset six channels for each band.
Ex.: Storing channels into preset number 4
1 Tune in to a channel you want.
2
Select preset channel. Change the display information
Category name = Channel name =
Artist name = Composer name* =
Song/program name/title = (back to the
beginning)
* Only for SIRIUS Satellite radio.
EN14-21_KW-XG700[J]f.indd 20EN14-21_KW-XG700[J]f.indd 20 3/28/07 6:00:05 PM3/28/07 6:00:05 PM