JVC KD-DV4206 User manual

ENGLISH
INDONESIA
DVD/CD RECEIVER KD-DV4206/KD-DV4205
ALAT PENERIMA DVD/CD KD-DV4206/KD-DV4205
For canceling the display demonstration, see page 5.
Untuk membatalkan tampilan demonstrasi, lihat halaman 5.
For installation and connections, refer to the separate manual.
Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
INSTRUCTIONS
BUKU PETUNJUK
GET0369-003A
[UN]
Cover_KD-DV4206_003A_f.indd 2Cover_KD-DV4206_003A_f.indd 2 12/23/05 2:38:02 PM12/23/05 2:38:02 PM

ENGLISH
2
This product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Macrovision, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
How to reset your unit
• Your preset adjustments will also be erased.
How to forcibly eject a disc
• If this does not work, reset your unit.
• Be careful not to drop the disc when it
ejects.
Thank you for purchasing a VC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRO UCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
How to use functions mode
If you press MODE, the unit goes into
functions mode, then the number buttons
and 5/∞ buttons work as different function
buttons.
How to detach/attach the control panel
Detaching...
Attaching...
[Within 5 seconds...]
EN02-05_KD-DV4206_001A_3.indd 2EN02-05_KD-DV4206_001A_3.indd 2 12/10/05 2:16:19 PM12/10/05 2:16:19 PM

ENGLISH
3
WARNINGS:
To prevent accidents and damage
• DO NOT install any unit in locations w ere;
– it may obstruct t e steering w eel and
gears ift lever operations.
– it may obstruct t e operation of safety devices
suc as air bags.
– it may obstruct visibility.
• DO NOT operate t e unit w ile driving.
• If you need to operate t e unit w ile driving, be
sure to look a ead carefully.
• T e driver must not watc t e monitor w ile
driving.
If t e parking brake is not engaged, “DRIVER
MUST NOT WATCH THE MONITOR WHILE DRIVING.”
appears on t e monitor, and no playback picture
will be s own.
– T is warning appears only w en t e parking
brake wire is connected to t e parking brake
system built in t e car (refer to t e Installation/
Connection Manual).
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.
CONTENTS
Introduction ............................................. 4
OPERATIONS
Basic operations
• Control panel .......................................... 6
• Remote controller (RM-RK230) ................ 7
Listening to the radio ................................ 9
isc operations ......................................... 10
EXTERNAL DEVICES
Listening to the C changer ....................... 16
Listening to the iPod®/ . player ................. 17
Listening to the other external
components .......................................... 18
SETTINGS
Selecting a preset sound mode—C-EQ ........ 19
General settings—PSM ............................ 20
V setup menu ....................................... 21
Assigning names to the stations ................. 24
Maintenance ............................................ 25
More about this unit ................................. 26
Troubleshooting ....................................... 29
Specifications ........................................... 32
EN02-05_KD-DV4206_001A_3.indd 3EN02-05_KD-DV4206_001A_3.indd 3 12/10/05 2:16:22 PM12/10/05 2:16:22 PM

ENGLISH
4
Disc type Playable Unplayable
DVD Video, Dual Disc (DVD side only),
DVD-R*/-RW, +R/+RW
• Recorded in DVD-Video format only and in
PAL/ TSC color system
DVD Audio, Dual Disc (non-DVD side),
DVD-RAM, DVD-ROM, DVD-R/-RW, +R/+RW
• Recorded in DVD-VR format
Video CD
CD-R/-RW
SVCD (Super Video CD)
DVD-R/-RW, +R/+RW, DVD-ROM
• Compliant to UDF bridge format —
CD-R/-RW
• Compliant to ISO 9660 level 1, ISO 9660
level 2, Romeo, Joliet
—
Audio CD, CD Text
CD-R/-RW
• Compliant to CD-DA format
CD-ROM, CD-I (CD-I Ready), Photo CD
• It is possible to play back finalized +R/+RW (Video mode only) discs. However the use of +R double layer disc on this unit is not
recommended.
* DVD-R recorded in multi-border format is also playable (except for dual layer discs).
Introduction
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not
comply with the “Compact Disc Digital Audio”
standard. Therefore, the use of Non-DVD
side of a DualDisc on this product may not e
recommended.
Caution on volume setting
Discs produce very little noise compared with
other sources. Lower the volume efore playing
a disc to avoid damaging the speakers y the
sudden increase of the output level.
Note on Region Code:
DVD players and DVD Video discs have
their own Region Code num ers. This unit
can only play ack DVD discs whose Region
Code num ers include “3.”
Examples:
If you insert a DVD Video disc of an
incorrect Region Code
“REGION CODE ERROR!” appears on the
monitor.
EN02-05_KD-DV4206_001A_f.indd 4EN02-05_KD-DV4206_001A_f.indd 4 12/14/05 8:27:41 PM12/14/05 8:27:41 PM

ENGLISH
5
Before operating the unit — Cancel the display demonstration and set the clock
• See also page 20.
~ Turn on t e power.
Ÿ Enter t e PSM settings.
! ] ⁄ Cancel t e display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set t e clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the minute.
@ Finis t e procedure.
When the power is turned off:
Check the current clock ti e
When the power is turned on:
Change the display infor ation
EN02-05_KD-DV4206_001A_3.indd 5EN02-05_KD-DV4206_001A_3.indd 5 12/10/05 2:16:24 PM12/10/05 2:16:24 PM

6
ENGLISH
Basic operations — Control panel
• FM/AM: Select the bands.
• DISC: Start playback.
Select the source.
FM/AM = DISC* = CD-CH*/IP D*/D.PLAYER* (or
EXT IN) = (back to the beginning)
* You cannot select these sources if they are not ready.
Change the display information.
Display window
• FM/AM: Select preset station.
• DISC: Select folder.
Also functions as +10/–10 buttons after pressing MODE
to skip 10 chapters/tracks at a time
• IP D/D.PLAYER: Enter the main menu/Pause
or stop playback/Confirm selection.
Select the sound mode.
Eject disc.
Detach the panel.
Adjust the sound mode.
Hold to enter the PSM settings
Enter functions mode.
Press MODE, then one of the following buttons (within
5 seconds)
M : Turn on/off monaural reception
SSM: Automatic station presetting
RPT: Select repeat play
RND: Select random play
• FM/AM: Select preset station.
• DISC: Select chapter/title/folder/
track/disc (for CD changer).
• FM/AM: Search for station.
• DISC: Select chapter/track.
• IP D/D.PLAYER: Select track.
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
Insert disc.Volume control
EN06-09_KD-DV4206_001A_f.indd 6EN06-09_KD-DV4206_001A_f.indd 6 12/14/05 1:03:13 PM12/14/05 1:03:13 PM

ENGLISH
OPERATIONS
7
Display window
Basic operations — Remote controller (RM-RK230)
Installing the lithium coin battery (CR2025)
Before using the remote controller:
• Aim the remote controller directly at the
remote sensor on the unit.
• DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
Remote sensor Continued on the next page
Track information indicators
Tuner reception indicators
Main display
(Time, menu, playback information)
Source display/Preset No./Track No./
Folder No./Disc No./Chapter No.
Loudness indicatorDisc type indicators
Playback source indicators Equalizer indicator
Sound mode indicators
Playback mode/item indicators
(Random/Repeat)
Warning:
To prevent accidents and damage
• Do not install any battery other than
C 2025 or its equivalent.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, heat
the battery, or dispose of it in a fire.
• Do not leave the battery with other
metallic materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate
when throwing away or saving it.
Track indicator
EN06-09_KD-DV4206_001A_3.indd 7EN06-09_KD-DV4206_001A_3.indd 7 12/10/05 2:17:21 PM12/10/05 2:17:21 PM

8
ENGLISH
For FM/AM tuner operations:
• PRESET 5 / ∞
Changes the preset stations.
• 4 / ¢
– Searches for the stations if pressed
briefly.
– Manual searches if pressed and held.
For iPod/D. player operations:
• 5 / ∞
∞: Pauses/stops or resu es playback.
5: Enters the ain enu.
(Now 5/∞/4 / ¢ work as the
enu selecting buttons.)*3
• 4 / ¢ (in enu selecting ode)
– Selects an ite if pressed briefly.
(Then, press ∞ to confir the
selection.)
– Skips 10 ite s at a ti e if pressed and
held.
w • Shows the on-screen bar.
• Also function as the /TITLE button
when pressed with SHIFT button (see
pages 12 and 13).
e*1 • DVD: Shows the DVD disc enu.
• VCD: Starts PBC playback.
r*1 • Makes selection/settings.
• DISC +/– buttons: Changes discs when
the source is “CD-CH.”
t*1 RETURN button
y • DVD: Selects audio language ( ),
subtitles ( ), angle ( ).
• VCD: Selects audio channel ( ).
*1 Functions as number buttons when pressed
with SHIFT button.
– FM/AM: Selects preset stations.
– DISC: Selects chapter/title/folder/trac .
*2 Functions as +10/–10/+100/–100 buttons
when pressed with SHIFT button.
*3 5 : Returns to the previous menu.
∞ : Confirms the selection.
MONITOR CONTROL
1 Monitor control buttons
• Used for a JVC onitor—KV-MR9010,
KV-MH6510, KV-M706, or KV-M705.
DVD/RECEIVER CONTROL
2 Turns on/off the power.
• Attenuates the sound if the power is on.
3 Selects the source.
4 Selects the FM/AM bands.
5*1 • DVD: Shows the DVD disc enu.
• VCD: Starts PBC playback.
6 Not applicable for this unit.
7 Adjusts the volu e level.
• 2nd VOL:
Not applicable for this unit.
8*1 Enters DVD setup enu.
9 SHIFT button
p 7 (stop), 3 (play), 8 (pause)
• 3 (play) also function as ZOOM button
when pressed with SHIFT button (see
page 12).
•
Not applicable for CD changer/iPod/
D. player operations.
q*2 For advanced disc operations:
• /TITLE 5 / ∞
DVD: Selects the titles.
MP3/WMA: Selects the folders if
included.
• 4 / ¢: Reverse skip/forward skip.
• 1 / ¡: Reverse search/forward
search (not applicable for CD changer
operations).
EN06-09_KD-DV4206_001A_f.indd 8EN06-09_KD-DV4206_001A_f.indd 8 12/14/05 8:29:48 PM12/14/05 8:29:48 PM

ENGLISH
OPERATIONS
9
When an F stereo broadcast is hard to
receive
1
2
eception improves, but stereo effect will be
lost.
• MO indicator lights up.
F station automatic presetting —SS
(Strong-station Sequential emory)
You can preset six stations for each band.
1
2
Listening to the radio
Change the display information
~ Select “FM/AM.”
Ÿ Select the bands.
! Search for a station to listen—Auto Search.
• Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it
repeatedly.
Select preset station.
3
Local FM stations with the strongest signals
are searched and stored automatically in the
FM band.
anual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
Lights up when receiving an FM stereo
broadcast with sufficient signal strength
* If no name is assigned to a station, “NO NAME”
appears. To assign a name, see page 4.
EN06-09_KD-DV4206_001A_3.indd 9EN06-09_KD-DV4206_001A_3.indd 9 12/10/05 2:17:23 PM12/10/05 2:17:23 PM

*1 If the file does not have Tag information or “TAG
DISP” is set to “TAG OFF” (see page 20 , folder
name and file name appear. TAG indicator will
not light up.
*2 “NO NAME” appears for an audio CD.
10
ENGLISH
Disc operations
Before performing any operations...
Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control
playback of other discs by referring to the monitor screen. ( ee pages 13 – 15.)
The disc type is automatically detected, and playback starts automatically (for DVD: automatic start
depends on its internal program).
If the current disc does not have any disc menu (when playback stops), all tracks will be played
repeatedly until you change the source or eject the disc.
If “ ” appears on the monitor when pressing a button, the unit cannot accept the operation you
have tried to do.
• In some cases, without showing “ ,” operations will not be accepted.
Insert disc.
Playback starts automatically with most of the discs. Eject disc.
Change the display information
Start playback if necessary.
Prohibiting disc ejection
To cancel the prohibition, repeat
the same procedure.
EN10-15_KD-DV4206_001A_3.indd 10EN10-15_KD-DV4206_001A_3.indd 10 12/10/05 2:16:55 PM12/10/05 2:16:55 PM

ENGLISH
OPERATIONS
11
Operations using the control panel
Pressing (or holding) the following buttons allows you to...
Disc type
(Number buttons)
Press: Select chapter
Hold: Reverse/fast forward
chapter*
—
During stop: Locate title
During play/pause: Locate
chapter
Press: Select track
Hold: Reverse/fast forward
track*
—
Locate particular track directly
(PBC not in use)
Select track Select folder Locate particular folder directly
Press: Select track
Hold: Reverse/fast forward
track*
—
Locate particular track directly
* Search speed changes to on the monitor.
After pressing , press the following buttons to...
Disc type
Skip 10 chapters (during play
or pause)
CHP RPT:
Repeat current chapter
TIT RPT:
Repeat current title
—
Skip 10 tracks (PBC not in use) TR RPT:
Repeat current track (PBC not
in use)
DISC RND:
Randomly play all tracks (PBC
not in use)
Skip 10 tracks (within the same
folder)
TR RPT:
Repeat current track
FLDR RPT:
Repeat current folder
FLDR RND:
Randomly play all tracks of
current folder, then tracks of
next folders
DISC RND:
Randomly play all tracks
Skip 10 tracks TR RPT:
Repeat current track
DISC RND:
Randomly play all tracks
• To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”
EN10-15_KD-DV4206_001A_3.indd 11EN10-15_KD-DV4206_001A_3.indd 11 12/10/05 2:16:58 PM12/10/05 2:16:58 PM

12
ENGLISH
Canceling the PBC playback...
1
2 While holding , press *3 to start the
desired track.
• To resume PBC, press / .
To enlarge the view (Zoom in)...
1 While holding , press ZOOM repeatedly.
2 Move the enlarged portion.
• To cancel zoom, select ZOOM OFF.”
Operations using the remote controller—RM-RK230
: Stop play
: Pause (Frame by frame playback if pressed during pause.)
: Start play (10-second review if pressed during play.)
: Reverse/forward chapter search*1
• Slow motion during pause. No sound can be heard.*2
: Press: Select chapter (during play or pause)
Hold: Reverse/fast-forward chapter search
: Select title
: Select audio language
: Select subtitle language
: Select view angle
: Stop play
: Pause (Frame by frame playback if pressed during
pause.)
: Start play
: Reverse/forward track search*1
• Slow motion during pause. No sound can
be heard.*2
• Reverse slow motion does not work.
: Press: Select track
Hold: Reverse/fast-forward track search
: Select audio channel (ST: stereo, L: left, R: Right)
While hol ing ...*3
: Select track (For VCD with PBC, a list of items is
shown on the disc menu.)
• To return to the previous menus, press .
To enlarge the view (Zoom in)...
1 While holding , press ZOOM
repeatedly.
2 Move the enlarged portion.
• To cancel zoom, select ZOOM OFF.”
Using menu riven features...
1 /
2 Select an item you want to start play.
3
While hol ing ...*3
: Select chapter (during play or
pause)
Select title (when stop)
, then :
Select title directly
EN10-15_KD-DV4206_001A_f.indd 12EN10-15_KD-DV4206_001A_f.indd 12 12/16/05 4:00:27 PM12/16/05 4:00:27 PM

*1 Search speed changes to on the monitor if pressed repeatedly.
*2 Slow motion speed changes to on the monitor if pressed repeatedly.
*3 For selecting numbers greater than 9 or 99, press or , then follow by .
*4 To use direct folder access on MP3/ MA discs, it is required that folders are assigned with 2-digit numbers at the beginning of their
folder names—01, 02, 03, and so on.
ENGLISH
OPERATIONS
13
Ex.: Time search
• DVD: _:_ _:_ _
To enter 1 (hours): 02 (minutes): 00
(seconds), ress 1, 0, 2, 0, then 0.
• VCD (PBC not in use): _ _:_ _
To enter 64 (minutes): 00 (seconds),
ress 6, 4, 0, then 0.
: Stop play
: Pause
: Start play (Playback starts from the beginning of
the track.)
: Select track
: Select folder
While holding ...*3
: Select track (within the same folder)
, then : Select folder directly*4
: Stop play
: Pause
: Start play
: Reverse forward track search
: Press: Select tracks
Hold: Reverse fast-forward track search
While holding ...*3
: Select track directly
Operations using the on-screen bar
These o erations are ossible on the monitor using the remote controller.
~ Show the on-screen bar (see page 14).
(once) for MP3/WMA/CD
(twice) for DVD/VCD
Ÿ Select an item.
! Make a selection.
If o -u menu a ears...
• For entering time/numbers, see the following.
⁄ Remove the on-screen bar.
Continued on the next page
Entering time/numbers
• To select numbers 0 – 9:
While holding , ress .
• To select numbers greater than 9:
While holding , ress . Then, ress
.
• After entering the numbers, ress .
• To reduce numbers, use .
• To correct a misentry, use .
EN10-15_KD-DV4206_003A_f.indd 13EN10-15_KD-DV4206_003A_f.indd 13 12/21/05 8:28:54 PM12/21/05 8:28:54 PM

14
ENGLISH
Information
Operation
On-screen bar
1 Disc type
2 DVD/DTS audio CD: Audio signal format type
VCD: PBC
3 Playbac information
Current title/chapter
Current trac
4 Time indication
Elapsed playing time of the disc (For DVD,
elapsed playing time of the current title.)
DVD: Remaining title time
VCD: Remaining disc time
Elapsed playing time of the current
chapter/trac
Remaining time of the current chapter/
trac
5 Playbac status
Play
Forward/reverse search
Forward/reverse slow-motion
Pause
Stop
6 Operation icons
Change the time indication (see 4)
Time Search (Enter the elapsed playing
time of the current title or of the disc.)
Title Search (by its number)
Chapter Search (by its number)
Trac Search (by its number)
Change the audio language or audio
channel
Change the subtitle language
Change the view angle
DVD: Repeat play
VCD/MP3/WMA/CD: Repeat play
Intro play
Random play
Repeat play*1 :
(PBC not in use)
Repeat play*1 :
Random play*1 :
Intro play*2 :
Repeat play*1 :
Random play*1 :
Intro play*2 :
Repeat play*1 :
Random play*1 :
Intro play*2 :
*1 For repeat play/random play, see also page 11.
*2 Plays the beginning 15 seconds of...
INTRO TRACK (INTRO): All tracks of the current disc.
INTRO FOLDER: First tracks of all folders of the current
disc.
EN10-15_KD-DV4206_001A_3.indd 14EN10-15_KD-DV4206_001A_3.indd 14 12/12/05 9:48:18 AM12/12/05 9:48:18 AM

ENGLISH
OPERATIONS
15
older/track list screen
Before playing, you can display the folder
list/track list to confirm the contents and start
playing a track.
~ Display the folder/track list while stop.
Ÿ Select an item from the list.
• MP3/WMA: Track list of the selected
folder appears.
• To go back to the previous screen, press
.
1 Current folder number/total folder number
2 Current track number/total number of
tracks in the current folder or in disc (CD)
3 Current page/total number of the pages
included in the list
4 Current folder/track (highlighted bar)
Control screen
The control screen automatically appears when
you insert a disc.
~ Select “Folder” column or ”Track” column
on the control screen.
Ÿ Select a folder or track to start playback.
1 Current folder number/total folder number
2 Folder list with the current folder selected
3 elected playback mode
4 Elapsed playing time of the current track
5 Operation mode icon ( ‰, 7, 8, ¡, 1 )
6 Current track number/total number of
tracks in the current folder (total number of
tracks on the disc)
7 Track information
8 Track list with the current track selected
Operations using the control/list screen (MP3/WMA/CD)
These operations are possible on the monitor using the remote controller.
• Folder selection/information is only for MP3/WMA discs.
Ex.: MP3/WMA disc
Ex.: Folder list
EN10-15_KD-DV4206_001A_3.indd 15EN10-15_KD-DV4206_001A_3.indd 15 12/10/05 2:17:05 PM12/10/05 2:17:05 PM

16
ENGLISH
Listening to the CD changer
Change the display information
(see page 10)
Press: Select track
Hold: Reverse/fast-forward track
MP3: Select folders
After pressing , press the following
buttons to...
Skip 10 tracks (MP3: within the sa e
folder)
TRK RPT: Repeat current track
FLDR RPT: MP3: Repeat all tracks of
current folder
DISC RPT: Repeat all tracks of the
current disc
FLDR RND: MP3: Rando ly play
all tracks of the current
folder, then tracks of the
next folder
DISC RND: Rando ly play all tracks of
current disc
MAG RND: Rando ly play all tracks of
the inserted discs
• To cancel repeat play or random play, select
“RPT FF” or “RND FF.”
It is recommended to use a JV MP3-compatible D changer with your unit.
• You can only play conventional D (including D Text) and MP3 discs.
~ Select “CD-CH.”
Ÿ Select a disc to start playing.
Press: For selecting disc number 1 – 6.
Hold: For selecting disc number 7 – 12.
EN16-19_KD-DV4206_001A_3.indd 16EN16-19_KD-DV4206_001A_3.indd 16 12/10/05 2:17:32 PM12/10/05 2:17:32 PM

17
ENGLISH
EXTERNAL DEVICES
Listening to the iPod®/D. player
Change the display information
Before operating, connect the interface adapter
(KS-PD100 or KS-PD500) to the CD changer
jack of this unit
Preparations:
Make sure “CHANGER” is selected for the
external input setting, see page 20
~ Select “IPOD” or “D. PLAYE .”
Ÿ Select a song to start playing.
Selecting a track from the menu
1 Enter the main menu.
• This mode will be canceled
if no operations are done for
about 5 seconds
2 Select the desired menu.
For iPod:
PLAYLIST Ô A TISTS Ô ALBUMS Ô SONGS
Ô GEN ES Ô COMPOSE Ô (back to the
beginning)
For D. player:
PLAYLIST Ô A TIST Ô ALBUM Ô
GEN E Ô T ACK Ô (back to the beginning)
3 Confirm the selection.
• To move back to the previous
menu, press 5
• If a track is selected, playback starts
automatically
• Holding 4/¢ can skip 10
items at a time
Pause/stop playback
• To resume playback, press it again.
Press: Select tracks
Hold: Reverse/fast-forwar track
After pressing , press the following
buttons to
ONE PT:
Functions the same as “Repeat One” or
“Repeat Mo e = One.”
ALL PT:
Functions the same as “Repeat All” or
“Repeat Mo e = All.”
ALBM ND*:
Functions the same as “Shuffle
Albums” of the iPo .
SONG ND/ ND ON:
Functions the same as “Shuffle Songs”
or “Ran om Play = On.”
• To cancel repeat play or random play, select
“PT OFF” or “ ND OFF ”
* iPod: Only if you select “ALL” in “ALBUMS” of the main
“MENU ”
EN16-19_KD-DV4206_001A_f.indd 17EN16-19_KD-DV4206_001A_f.indd 17 12/14/05 1:05:57 PM12/14/05 1:05:57 PM

18
ENGLISH
EXTERNAL DEVICES
Listening to the other external components
Change the display information
You can connect an external component to the D changer jack on the rear using the Line Input
Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied).
Preparations:
Make sure “EXT IN” is selected for the external input setting, see page 20.
~ Select “EXT IN.”
Ÿ Turn on the connected component and start playing the source.
! Adjust the volume.
⁄ Adjust the sound as you want (see page 19).
MD player, etc.
MD player, etc.
JVC CD changer, [16]
Apple iPod, [17]
JVC D. player, [17]
Unit
CD changer jack
(see page 20 of the
”EXT IN” setting)
(see page 20 of the
”EXT IN” setting)
Concept diagram of the external device connection
• For connection, see Installation/ onnection manual (separate volume).
: Adapter (separately purchased)
EN16-19_KD-DV4206_001A_3.indd 18EN16-19_KD-DV4206_001A_3.indd 18 12/10/05 2:17:36 PM12/10/05 2:17:36 PM

19
ENGLISH
SETTINGS
BAS*1 (bass)
Adjust the bass.
–06 to +06
TRE*1 (treble)
Adjust the treble.
–06 to +06
FAD*2 (fader)
Adjust the front and rear speaker balance.
R06 to F06
BAL (balance)
Adjust the left and right speaker balance.
L06 to R06
L UD*1 (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volu e level.
LOUD ON or
LOUD OFF
V L.A*3 (volu e adjust)
Adjust and store auto-adjust ent volu e
level for each source, co paring to the FM
volu e level.
–05 to +05
V L (volu e)
Adjust the volu e.
00 to 30
(or 50)*4
*1 When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “U ER.”
*2 If you are using a two-speaker system, set the
fader level to “00.”
*3 You cannot make an adjustment for FM.
“FIX” appears.
*4 Depending on the amplifier gain control
setting. ( ee page 21 for details.)
Selecting a preset sound mode — C-EQ
Indication (For) BAS TRE L UD
(bass) (treble) (loudness)
USER (Flat sound) 00 00 OFF
R CK (Rock or disco usic) +03 +01 ON
CLASSIC (Classical usic) +01 –02 OFF
P PS (Light usic) +04 +01 OFF
HIP H P
(Funk or rap usic) +02 00 ON
JAZZ (Jazz usic) +02 +03 OFF
Adjusting the sound
1
2 Adjust the level.
EN16-19_KD-DV4206_001A_3.indd 19EN16-19_KD-DV4206_001A_3.indd 19 12/10/05 2:17:36 PM12/10/05 2:17:36 PM

20
ENGLISH
3 Select or adjust the selected PSM item.
4 Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5 Finish the procedure.
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1 Enter the PSM settings.
2 Select a PSM item.
General settings — PSM
Indication Item Setting, [reference page]
DEMO
Display demonstration
• DEMO ON [Initial]
• DEMO OFF
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
: ancels.
CLOCK H
Hour adjustment
1 – 12
[Initial: 1 (1:00)]
: See also page 5 for setting.
CLOCK M
Minute adjustment
– 59
[Initial: 00 (1:00)]
: See also page 5 for setting.
DIMMER • ON
• OFF [Initial]
: Dims the display illumination.
: ancels.
SCROLL*1• ONCE [Initial]
• AUTO
• OFF
: Scrolls the track information once.
: Repeats scrolling (5-second intervals).
: ancels. (Holding DISP can scroll the display regardless of the
setting.)
EXT IN*2
External input
• CHANGER [Initial]
• EXT IN
: To use a JV D changer, [16], or an Apple iPod/a JV
D. player, [17].
: To use any other external component than the above, [18].
TAG DISP
Tag display
• TAG ON [Initial]
• TAG OFF
: Shows the tag while playing MP3/WMA tracks.
: ancels.
NTSC/PAL
Video format
• PAL [Initial]
• NTSC
: Select this if your monitor is of the PAL color system.
: Select this if your monitor is of the NTS color system.
*1 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*2 Displayed only when one of the following sources is selected—FM, M, or DISC.
EN20-25_KD-DV4206_001A_3.indd 20EN20-25_KD-DV4206_001A_3.indd 20 12/10/05 2:17:47 PM12/10/05 2:17:47 PM