JVC KD-X141M User manual

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ENGLISH
РУCCKИЙ
TÜRKÇE
B5A-1356-00 [M2]
KD-X141M
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
ЦИФРОВОЙ МУЛЬТИМЕДИЙНЫЙ РЕСИВЕР
ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ
DİJİTAL MEDYA ALICISI
KULLANIM KILAVUZU
JS_JVC_KD-X141M_M2_C_00.indd 1JS_JVC_KD-X141M_M2_C_00.indd 1 9/2/2016 10:22:41 AM9/2/2016 10:22:41 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
i
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable
for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling
these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and
waste disposal will help conserve resources whilst preventing detrimental effects on our health and the
environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
For Turkey
Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü
Yönetmeliğe uygun olarak üretilmiştir.
Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama
sistemlerini kullanan ülkeleri için uygulanabilir)
Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz.
Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri
dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri
dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri
dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri
önlerken kaynakların korunmasına da yardımcı olacaktır.
Дата изготовления (месяц/год) находится на этикетке устройства.
Условия хранения:
Температура: от –30°C до +85°C
Влажность: от 0% до 90%
For Israel
JS_JVC_KD-X141M_M2_C_00.indd iJS_JVC_KD-X141M_M2_C_00.indd i 9/2/2016 10:22:41 AM9/2/2016 10:22:41 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ii
Declaration of Conformity with regard to the RE Directive 2014/53/EU
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU Representative:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
English
Hereby, JVCKENWOOD declares that the radio equipment “KD-X141M” is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.jvc.net/cs/car/eudoc/
Декларация соответствия относительно Директивы RE 2014/53/EU
Декларация соответствия относительно Директивы RoHS 2011/65/EU
Производитель:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
Представительство в ЕС:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
Русский
JVCKENWOOD настоящим заявляет, что радиооборудование «KD-X141M» соответствует Директиве
2014/53/EU.
Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет:
http://www.jvc.net/cs/car/eudoc/
RE Direktifi 2014/53/EU uyarınca Uygunluk Beyanı
RoHS Yönergesi 2011/65/EU'ya göre Uygunluk Bildirimi
Üretici:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
AB Temsilcisi:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
Turkish
Burada, JVCKENWOOD “KD-X141M” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir.
AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur.
http://www.jvc.net/cs/car/eudoc/
JS_JVC_KD-X141M_M2_C_00.indd iiJS_JVC_KD-X141M_M2_C_00.indd ii 9/2/2016 10:22:42 AM9/2/2016 10:22:42 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
2ENGLISH
CONTENTS BEFORE USE
IMPORTANT
• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe
Warning and Caution in this manual.
• Please keep the manual in a safe and accessible place for future reference.
WARNING
• Do not operate any function that takes your attention away from safe driving.
• Do not ingest the battery, Chemical Burn Hazard.
The remote control supplied with this product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Caution
Volume setting:
•
Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.
General:
•
Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.
Remote control (RM-RK52):
•
Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
BEFORE USE 2
BASICS 3
GETTING STARTED 4
1 Cancel the demonstration
2 Set the clock and date
3 Set the basic settings
USB/ANDROID 5
RADIO 7
AUX 8
AUDIO SETTINGS 9
DISPLAY SETTINGS 11
REFERENCES 12
Maintenance
More information
TROUBLESHOOTING 13
SPECIFICATIONS 14
INSTALLATION/
CONNECTION 15
How to read this manual
• Operations are explained mainly using buttons on the faceplate.
• English indications are used for the purpose of explanation. You can select the display language from the menu. ( 4)
• [XX] indicates the selected items.
• ( XX) indicates references are available on the stated page.
JS_JVC_KD-X141M_M2_1.indd 2JS_JVC_KD-X141M_M2_1.indd 2 9/15/2016 10:31:52 AM9/15/2016 10:31:52 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
3
ENGLISH
BASICS
To On the faceplate On the remote control
Turn on the power Press .
• Press and hold to turn off the power. ( Not available )
Adjust the volume Turn the volume knob. Press or .
• Press and hold to continuously increase
the volume to 15.
Press the volume knob to mute the sound or pause playback.
• Press again to cancel. Press to mute the sound or pause playback.
• Press again to cancel.
Select a source • Press repeatedly.
• Press , then turn the volume knob within 2 seconds.
Press SOURCE repeatedly.
Change the display
information
Press repeatedly.
( 12)
( Not available )
Attach How to resetDetach
Your preset
adjustments will be
erased except stored
radio stations.
Faceplate
Volume knob
Detach button
Display window
Remote control (RM-RK52)
This unit can be remotely controlled with an
optionally purchased remote control.
How to replace the battery
Pull out the insulation
sheet when using for
the first time.
Remote sensor
(Do not expose to bright sunlight.)
JS_JVC_KD-X141M_M2_1.indd 3JS_JVC_KD-X141M_M2_1.indd 3 9/15/2016 10:31:53 AM9/15/2016 10:31:53 AM

ENGLISH
4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1 Press and hold .
2 Turn the volume knob to select [CLOCK] , then press the knob.
To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST] , then press the
knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT] , then press the
knob.
6 Turn the volume knob to select [12H] or [24H] , then press the
knob.
To set the date
7 Turn the volume knob to select [DATE SET] , then press the knob.
8 Turn the volume knob to make the settings, then press the knob.
Day Month Year
9 Press to exit.
To return to the previous setting item, press .
1
2
Set the basic settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default: XX
SYSTEM
KEY BEEP ON
:Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
AM SRC
*
ON :Enables AM in source selection.; OFF :Disables. ( 7)
BUILT-IN AUX
*
ON :Enables AUX in source selection.; OFF :Disables. ( 8)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES
:Starts upgrading the firmware.;
NO :Cancels (upgrading is not activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
CLOCK
TIME SYNC ON
:The clock time is automatically set using the Clock Time (CT) data in FM
Radio Data System signal.;
OFF :Cancels.
CLOCK DISPLAY ON :The clock time is shown on the display even when the unit is turned off.;
OFF :Cancels.
ENGLISH
Select the display language for menu and music information if applicable.
By default,
ENGLISH is selected.
РУССКИЙ
ESPANOL
*
Not displayed when the corresponding source is selected.
3
JS_JVC_KD-X141M_M2_1.indd 4JS_JVC_KD-X141M_M2_1.indd 4 9/15/2016 10:31:59 AM9/15/2016 10:31:59 AM

ENGLISH 5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
USB/ANDROID
To directly select USB/ANDROID source, press .
To On the faceplate On the remote control
Reverse/Fast-forward*3Press and hold . Press and hold .
Select a file Press .Press .
Select a folder*4Press . Press .
Repeat play*3Press repeatedly.
TRACK REPEAT / FOLDER REPEAT / ALL REPEAT : MP3/WMA/WAV/FLAC file
ONE REPEAT / ALL REPEAT / REPEAT OFF : ANDROID
Random play*3Press repeatedly.
FOLDER RANDOM / ALL RANDOM / RANDOM OFF : MP3/WMA/WAV/FLAC file
SONG RANDOM / ALL RANDOM / RANDOM OFF : ANDROID
*1
Do not leave the cable inside the car when not using.
*2
When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install
the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.
For more information, visit <http://www.jvc.net/cs/car/>.
*3
For ANDROID: Applicable only when [AUTO MODE] is selected. ( 6)
*4
Only for MP3/WMA/WAV/FLAC files. This does not work for ANDROID.
Start playback
The source changes automatically and
playback starts.
USB input terminal
USB 2.0 cable
*1
(commercially available)
Micro USB 2.0 cable
*1
(commercially available)
USB
ANDROID*2
JS_JVC_KD-X141M_M2_1.indd 5JS_JVC_KD-X141M_M2_1.indd 5 9/15/2016 10:32:04 AM9/15/2016 10:32:04 AM

ENGLISH
6
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select control mode
While in ANDROID source, press repeatedly.
AUTO MODE : Control Android device from this unit via JVC MUSIC PLAY
application installed in the Android device.
AUDIO MODE : Control Android device using the Android device itself via
other media player applications installed in the Android
device. However, you can still play/pause or file skip from
this unit.
Select music drive
While in USB source, press repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage
Class).
• Selected drive of a multiple drives device.
Select a file from a folder/list
For ANDROID, applicable only when [AUTO MODE] is selected.
1 Press .
2 Turn the volume knob to select a folder/list, then press the knob.
3 Turn the volume knob to select a file, then press the knob.
Quick search
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
Alphabet search (applicable only for ANDROID source)
You can search for a file according to the first character.
1 Press to enter character search.
2 Turn the volume knob to select the desired character.
^A^ : Upper case letters (A to Z)
_A_ : Lower case letters (a to z)
-0- : Numbers (0 to 9)
-OTHERS- : Character other than AtoZ, 0to9
3 Press the volume knob to start searching.
• To return to the previous setting item, press .
• To cancel, press and hold .
USB/ANDROID
JS_JVC_KD-X141M_M2_1.indd 6JS_JVC_KD-X141M_M2_1.indd 6 9/15/2016 10:32:08 AM9/15/2016 10:32:08 AM

ENGLISH 7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
RADIO
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1 Press repeatedly to select FM or AM.
2 Press (or press on the remote control) to search for a station
automatically.
(or)
Press and hold (or press and hold on the remote control) until
“M” flashes, then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
Other settings
1 Press and hold .
2 Turn the volume knob to select an item ( see the
following table
) , then press the knob.
3 Repeat step 2until the desired item is selected/
activated or follow the instructions stated on the
selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
TUNER SETTING
RADIO TIMER
Turns on the radio at a specific time regardless of the current
source.
1 ONCE / DAILY / WEEKLY / OFF :Select how often the timer
will be turned on.
2 FM / AM :Select the band.
3 01 to 18 (for FM)/ 01 to 06 (for AM):Select the preset
station.
4 Set the activation day
*1
and time.
“
M ” lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM SRC] in [SOURCE SELECT] after
Radio Timer for AM is selected.
( 4)
SSM SSM 01–06
/ SSM 07–12 / SSM 13–18 : Automatically
presets up to 18 stations for FM. “SSM” stops flashing
when the first 6 stations are stored. Select
SSM 07–12 /
SSM 13–18 to store the following 12 stations.
*1
Selectable only when [ONCE] or [WEEKLY] is selected in step 1 .
JS_JVC_KD-X141M_M2_1.indd 7JS_JVC_KD-X141M_M2_1.indd 7 9/15/2016 10:32:10 AM9/15/2016 10:32:10 AM

ENGLISH
8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
RADIO
LOCAL SEEK ON :Searches only FM stations with good reception.; OFF :Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
IF BAND AUTO :Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.);
WIDE :Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
MONO SET ON :Improves the FM reception, but the stereo effect will be lost.;
OFF :Cancels.
NEWS SET
*2
ON :The unit will temporarily switch to News Programme if available.;
OFF :Cancels.
REGIONAL
*2
ON : Switches to another station only in the specific region using the “AF”
control.;
OFF :Cancels.
AF SET
*2
ON : Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
OFF : Cancels.
TI
*2
ON : Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up). ;
OFF :Cancels.
PTY SEARCH
*2
Select a PTY code (see below).
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.
*2
Only for FM source.
PTY code
NEWS , AFFAIRS , INFO , SPORT , EDUCATE , DRAMA , CULTURE , SCIENCE , VARIED , POP
M
(music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS , OTHER
M
(music), WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION , PHONE IN , TRAVEL ,
LEISURE , JAZZ , COUNTRY , NATION M (music), OLDIES , FOLK M (music), DOCUMENT
Use a portable audio player
1 Connect a portable audio player (commercially available).
2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT] . ( 4)
3 Press repeatedly to select AUX.
4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio
output.
3.5mm stereo mini plug with “L” shaped connector
(commercially available)
Portable audio player
Auxiliary input jack
AUX
JS_JVC_KD-X141M_M2_1.indd 8JS_JVC_KD-X141M_M2_1.indd 8 9/15/2016 10:32:13 AM9/15/2016 10:32:13 AM

ENGLISH 9
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
Default: XX
EQ SETTING
PRESET EQ
Select a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ] .
FLAT / DRVN 3 / DRVN 2 / DRVN 1 / HARD ROCK / HIP HOP / JAZZ / POP / R&B / TALK /
USER / VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE
EASY EQ
Adjust your own sound settings.
• The settings are stored to [USER] .
• The settings made may affect the current settings of [PRO EQ] .
SUB.W SP
*1*2:
00 to +06 (Default: 03
SUB.W
*1*3:
–08 to +08 00
BASS
: LVL–06 to LVL+06 LVL 00
MID
: LVL–06 to LVL+06 LVL 00
TRE
: LVL–06 to LVL+06 LVL 00 )
PRO EQ 1 BASS / MIDDLE / TREBLE :Select a sound tone.
2 Adjust the sound elements of the selected sound tone.
• The settings are stored to [USER] .
• The settings made may affect the current settings of [EASY EQ] .
BASS Frequency: 60HZ / 80HZ / 100HZ / 200HZ (Default: 80HZ
Level: LVL–06 to LVL+06 LVL 00
Q: Q1.0 / Q1.25 / Q1.5 / Q2.0 Q1.0 )
MIDDLE Frequency: 0.5KHZ / 1.0KHZ / 1.5KHZ / 2.5KHZ (Default: 1.0KHZ
Level: LVL–06 to LVL+06 LVL 00
Q: Q0.75 / Q1.0 / Q1.25 Q1.25 )
TREBLE Frequency: 10.0KHZ / 12.5KHZ / 15.0KHZ / 17.5KHZ (Default: 10.0KHZ
Level: LVL–06 to LVL+06 LVL 00
Q: Q FIX Q FIX )
AUDIO CONTROL
BASS BOOST LEVEL +01
to LEVEL +05 ( LEVEL +01 ): Selects your preferred bass boost level.;
OFF :Cancels.
*1, *2, *3:
( 10)
Select a preset equalizer
Press repeatedly.
(or)
Press , then turn the volume knob within 5seconds.
Preset equalizer: FLAT (default), DRVN 3 , DRVN 2 , DRVN 1 , HARD ROCK , HIP
HOP
, JAZZ , POP , R&B , TALK , USER , VOCAL BOOST , BASS BOOST , CLASSICAL , DANCE
• Drive equalizer ( DRVN 3 / DRVN 2 / DRVN 1 ) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or
running noise of the tyres.
Store your own sound settings
1 Press and hold to enter EASY EQ setting.
2 Turn the volume knob to select an item, then press the knob.
Refer to [EASY EQ] for setting and the result is stored to [USER] .
• To return to the previous setting item, press .
• To exit, press .
Other settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected/activated or
follow the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
JS_JVC_KD-X141M_M2_1.indd 9JS_JVC_KD-X141M_M2_1.indd 9 9/15/2016 10:32:14 AM9/15/2016 10:32:14 AM

ENGLISH
10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
LOUDNESS LEVEL 01 / LEVEL 02 :Boosts low or high frequencies to produce a well-
balanced sound at low volume.;
OFF :Cancels.
SUB.W LEVEL
*1
SPK-OUT
*2
SUB.W 00 to SUB.W +06 ( SUB.W +03 ):Adjusts the
output level of the subwoofer connected via speaker lead.
(16)
PRE-OUT
*3
SUB.W –08 to SUB.W +08 ( SUB.W 00 ):Adjusts the
output level of the subwoofer connected to the lineout
terminals (REAR/SW) through an external amplifier.
( 16)
SUBWOOFER SET
*3
ON : Turns on the subwoofer output.; OFF : Cancels.
SUBWOOFER  LPF
*1
FRQ THROUGH :All signals are sent to the subwoofer;
FRQ 55HZ / FRQ 85HZ / FRQ 120HZ :Audio signals with frequencies lower
than 55Hz/85Hz/120Hz are sent to the subwoofer.
SUB.W PHASE
*1*4
REVERSE (180°)/ NORMAL (0°):Selects the phase of the subwoofer output
to be in line with the speaker output for optimum performance.
FADER POSITION R06 to POSITION F06 ( POSITION 00 ):Adjusts the front and
rear speaker output balance.
BALANCE
*5
POSITION L06 to POSITION R06 ( POSITION 00 ):Adjusts the left and
right speaker output balance.
VOLUME  ADJUST LEVEL –15 to LEVEL +06 ( LEVEL 00 ):Preset the initial volume level of
each source (compared to the FM volume level). Before adjustment, select
the source you want to adjust. (“VOLADJFIX” appears if FM is selected.)
AMP  GAIN LOW POWER :Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50W to prevent damaging
the speakers.);
HIGH POWER :The maximum volume level is 35.
*1
Displayed only when [SUBWOOFER SET] is set to [ON] .
*2
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W] .
*3
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W] .
*4
Selectable only if a setting other than [FRQ THROUGH] is selected for [SUBWOOFER LPF] .
*5
This adjustment will not affect the subwoofer output.
D.T.EXPANDER
(Digital Track
Expander)
ON :Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression.;
OFF :Cancels.
SPK/PRE OUT Depending on the speaker connection method, select the appropriate
setting to get the desired output. ( 
Speaker output settings )
Speaker output settings
Select the output setting for the speakers [SPK/PRE OUT] , base on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. ( 16)
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT REAR/SW
REAR/REAR Front speakers output Rear speakers output
REAR/SUB.W (default) Front speakers output Subwoofer output
SUB.W/SUB.W Front speakers output Subwoofer output
Connection via speaker leads
For connections without using an external amplifier. However, with
this settings you can also enjoy the subwoofer output.
( 16)
Setting on
[SPK/PRE OUT]
Audio signal through rear speaker lead
L (left) R (right)
REAR/REAR Rear speakers output Rear speakers output
REAR/SUB.W Rear speakers output Rear speakers output
SUB.W/SUB.W Subwoofer output (Mute)
If [SUB.W/SUB.W] is selected:
–
[FRQ 120HZ] is selected in [SUBWOOFER LPF] and [FRQ THROUGH] is not
available.
–
[POSITION R01] is selected in [FADER] and selectable range is
[POSITION R06] to [POSITION 00] .
JS_JVC_KD-X141M_M2_1.indd 10JS_JVC_KD-X141M_M2_1.indd 10 9/15/2016 10:32:17 AM9/15/2016 10:32:17 AM

ENGLISH 11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
DISPLAY
DIMMER
Dim the illumination.
OFF :Dimmer is turned off. Brightness changes to [DAY] setting.
ON :Dimmer is turned on. Brightness changes to [NIGHT] setting.
(
 [BRIGHTNESS] )
DIMMER TIME :Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default:
[ON] : 18:00 ; [OFF] : 6:00 )
DIMMER AUTO :Dimmer turns on and off automatically when you turn off or
on the car headlights.
*1
DISPLAY SETTINGS
BRIGHTNESS Set the brightness for day and night separately.
1 DAY / NIGHT :Select day or night.
2 Select a zone.
3 LEVEL 00 to LEVEL 31 : Set the brightness level.
(Default:
BUTTON ZONE : DAY : LEVEL 25 ; NIGHT : LEVEL 09
DISP ZONE : DAY : LEVEL 31 ; NIGHT : LEVEL 12 )
TEXT SCROLL
*2
SCROLL ONCE :Scrolls the display information once.;
SCROLL AUTO :Repeats scrolling at 5-second intervals.;
SCROLL OFF :Cancels.
*1
The illumination control wire connection is required. ( 16)
*2
Some characters or symbols will not be shown correctly (or will be blanked).
JS_JVC_KD-X141M_M2_1.indd 11JS_JVC_KD-X141M_M2_1.indd 11 9/15/2016 10:32:19 AM9/15/2016 10:32:19 AM

ENGLISH
12
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Maintenance
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector
gently with a cotton swab, being careful not to
damage the connector.
More information
For: – Latest firmware updates and latest compatible item list
– Any other latest information
Visit <http://www.jvc.net/cs/car/>.
Playable files
• For detailed information and notes about the playable audio files, visit
<http://www.jvc.net/cs/car/>.
• Playable audio file: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible
depending on the types or conditions of media or device.
About USB devices
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5m may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.
About Android device
• This unit supports Android OS 4.1 and above.
• Some Android devices (with OS4.1 and above) may not fully support Android Open Accessory
(AOA)2.0.
• If the Android device supports both mass storage class device and AOA2.0, this unit always
playback via AOA2.0 as priority.
REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other
information (eg. station name) appears.
Source name Display information
FM
or AM Frequency (Date/Clock)
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY) (Date/Clock) Radiotext (Date/
Clock) Radiotext+ (Radiotext+) Song title (Artist) Song title
(Date/Clock) Frequency (Date/Clock) (back to the beginning)
USB (For MP3/WMA/WAV/FLAC files)
Song title (Artist) Song title (Album name) Song title (Date/Clock)
File name (Folder name) File name (Date/Clock) Playing time (Date/
Clock) (backtothebeginning)
ANDROID When [AUTO MODE] is selected (  6) :
Song title (Artist) Song title (Album name) Song title (Date/Clock)
Playing time (Date/Clock) (backtothebeginning)
AUX AUX (Date/Clock)
Connector (on the reverse
side of the faceplate)
Available Cyrillic letters
Available characters
Display indications
JS_JVC_KD-X141M_M2_1.indd 12JS_JVC_KD-X141M_M2_1.indd 12 9/15/2016 10:32:21 AM9/15/2016 10:32:21 AM

ENGLISH 13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the [SOURCE SELECT] setting. ( 4)
Radio
• Radio reception is poor.
• Static noise while
listening to the radio.
Connect the antenna firmly.
USB
Playback order is not as
intended.
The playback order is determined by the file name .
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and file skips.
Check whether the file is a playable format. ( 12)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the USB device.
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 12)
• Reattach the device.
Correct characters are not
displayed.
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
( 4) , some characters may not be displayed correctly.
Symptom Remedy
ANDROID
• Sound cannot be heard
during playback.
• Sound output only from
the Android device.
• Reconnect the Android device.
• If in [AUDIO MODE] , launch any media player application
on the Android device and start playback.
• If in [AUDIO MODE] , relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit.
( 12)
Cannot playback at
[AUTO MODE] .
• Make sure JVC MUSIC PLAY APP is installed on the
Android device.
( 5)
• Reconnect the Android device and select the appropriate
control mode.
( 6)
• If this does not solve the problem, the connected Android
device does not support
[AUTO MODE] . ( 12)
“NO DEVICE” or “READING”
keeps flashing.
• Switch off the developer options on the Android device.
• Reconnect the Android device.
• If this does not solve the problem, the connected Android
device does not support
[AUTO MODE] . ( 12)
Playback is intermittent or
sound skips.
Turn off the power saving mode on the Android device.
“CANNOT PLAY”
• Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
If you still have troubles, reset the unit. ( 3)
JS_JVC_KD-X141M_M2_1.indd 13JS_JVC_KD-X141M_M2_1.indd 13 9/15/2016 10:32:26 AM9/15/2016 10:32:26 AM

ENGLISH
14
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
SPECIFICATIONS
Tuner
FM Frequency Range 87.5MHz — 108.0MHz (50kHz step)
Usable Sensitivity (S/N=26dB) 0.71μV/75Ω (8.2dBf)
Quieting Sensitivity
(DINS/N=46dB)
2.0μV/75Ω
Frequency Response (±3dB) 30Hz — 15kHz
Signal-to-Noise Ratio (MONO) 64dB
Stereo Separation (1kHz) 40dB
AM
(MW)
Frequency Range 531kHz — 1602kHz (9kHz step)
Usable Sensitivity (S/N=20dB) 28.2μV (29dBμ)
USB
USB Standard USB1.1, USB2.0 (Full speed)
Compatible Devices Mass storage class
File System FAT12/16/32
Maximum Supply Current DC5V 1A
D/A Converter 24 Bit
Frequency Response (±1dB) 20Hz — 20kHz
Signal-to-Noise Ratio (1kHz) 105dB
Dynamic Range 88dB
Channel Separation 90dB
MP3 Decode Compliant with MPEG-1/2 Audio Layer-3
WMA Decode Compliant with Windows Media Audio
WAV Decode RIFF waveform Audio Format (Linear PCM
only)
FLAC Decode FLAC files
Auxiliary
Frequency Response (±3dB) 20Hz—20kHz
Input Maximum Voltage 1000mV
Input Impedance 30kΩ
Audio
Maximum Output Power 50W×4 or
50W×2 + 50W×1 (Subwoofer = 4Ω)
Full Bandwidth Power
(at less than 1% THD)
22W×4
Speaker Impedance 4Ω—8Ω
Preout Level/Load (USB) 2500mV/10kΩ load
Preout Impedance ≤600Ω
General
Operating Voltage
(10.5V—16V allowable)
14.4V
Maximum Current Consumption 10A
Operating Temperature Range –10°C — +60°C
Installation Size (W×H×D) 182mm×53mm×114mm
Net Weight (includes Trimplate,
Mounting Sleeve)
0.6k
g
Subject to change without notice.
JS_JVC_KD-X141M_M2_1.indd 14JS_JVC_KD-X141M_M2_1.indd 14 9/15/2016 10:32:30 AM9/15/2016 10:32:30 AM

ENGLISH 15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Warning
• The unit can only be used with a 12V DC power supply, negative ground.
• Disconnect the battery’s negative terminal before wiring and mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the car
chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after installation.
Caution
• For safety’s sake, leave wiring and mounting to professionals. Consult the
car audio dealer.
• Install this unit in the console of your vehicle. Do not touch the metal parts
of this unit during and shortly after use of the unit. Metal parts such as the
heat sink and enclosure become hot.
• Do not connect the wires of speakers to the car chassis or Ground wire
(black), or connect them in parallel.
• Connect speakers with a maximum power of more than 50W. If the
maximum power of the speakers is lower than 50W, change the
[AMP GAIN] setting to avoid damaging the speakers. ( 10)
• Mount the unit at an angle of less than 30º.
• If your vehicle wiring harness does not have the ignition terminal, connect
Ignition wire (red) to the terminal on the vehicle’s fuse box which provides
12 V DC power supply and is turned on and off by the ignition key.
• Keep all cables away from heat dissipate metal parts.
• After the unit is installed, check whether the brake lamps, blinkers, wipers,
etc. on the car are working properly.
• If the fuse blows, first make sure the wires are not touching car’s chassis,
then replace the old fuse with one that has the same rating.
Basic procedure
1 Remove the key from the ignition switch, then disconnect the [
terminal of the car battery.
2 Connect the wires properly.
See Wiring connection.
( 16)
3 Install the unit to your car.
See Installing the unit (in-dash mounting).
4 Connect the terminal of the car battery.
5 Reset the unit. ( 3)
How to remove the unit
When installing without the mounting sleeve
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws
(commercially available).
Use only the specified screws. Using wrong screws might damage
the unit.
Installing the unit (in-dash mounting)
Do the required wiring.
( 16)
Bend the appropriate tabs to
hold the sleeve firmly in place.
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
Dashboard of
your car
JS_JVC_KD-X141M_M2_1.indd 15JS_JVC_KD-X141M_M2_1.indd 15 9/15/2016 10:32:30 AM9/15/2016 10:32:30 AM

ENGLISH
16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
INSTALLATION/CONNECTION
Part list for
installation
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
(A) Faceplate
*1
Firmly connect the
ground wire of the
amplifier to the
car’s chassis to avoid
damaging the unit.
*2
You can also connect
a subwoofer speaker
directly using this lead
without an external
subwoofer amplifier. For
setting,
10 .
Wiring connection
Car fuse block
Ignition switch
Blue/white: To amplifier
Blue: To power antenna
Make this connection if
your vehicle factory wiring
harness does not have “12V
ignition switch” wire.
Separate red wire
Signal cord (not supplied)
Remote wire
(not supplied)
Fuse (10A)
Antenna terminal
Factory wiring
harness (vehicle)
Vehicle
dashboard
Black: Ground
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
*2
Green/black
*2
Purple: Rear speaker (right)
Purple/black
Join the same color wires together.
Red: Ignition 12V
Orange/white: Illumination
Blue/white: Remote (12V 350mA)
Light blue/yellow To the steering wheel
remote control adapter
JVC Amplifier
*1
Custom wiring harness
(separately purchased)
Recommended connection
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness specific
for your car and leave this job to professionals for your
safety. Consult your car audio dealer.
(Not used) Brown
Yellow: Battery 12V
Rear/Subwoofer ouput
Front ouput
JS_JVC_KD-X141M_M2_1.indd 16JS_JVC_KD-X141M_M2_1.indd 16 9/15/2016 10:32:33 AM9/15/2016 10:32:33 AM

Blank Pages.indd 1Blank Pages.indd 1 8/9/2016 3:22:10 PM8/9/2016 3:22:10 PM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
2РУССКИЙ
CОДЕРЖАНИЕ ПОДГОТОВКА К ЭКСПЛУАТАЦИИ
ВАЖНО
• В целях обеспечения надлежащей эксплуатации, пожалуйста, перед тем как приступить к эксплуатации данного изделия, внимательно прочтите настоящее
руководство. Особенно важно, чтобы вы прочли и соблюдали все указания в данном руководстве, отмеченные словами Предупреждение и Внимание.
• Пожалуйста, держите данное руководство в надежном и доступном месте для обращения к нему за справками в будущем.
ПРЕДУПРЕЖДЕНИЕ
• Не используйте функции, которые отвлекают внимание и мешают безопасному вождению.
• Не глотайте батарею – опасность химического ожога.
Пульт дистанционного управления в комплекте этого изделия содержит аккумулятор кнопочного типа.
В случае проглатывания аккумулятора кнопочного типа он может вызвать сильные внутренние ожоги всего через 2 часа и привести к смерти.
Храните новые и использованные аккумуляторы в недоступном для детей месте.
Если аккумуляторный отсек не закрыт надежно, прекратите использование изделия и поместите его в недоступное для детей место.
Если вы полагаете, что батарея могла быть проглочена или находится внутри любой части тела, немедленно обратитесь за медицинской помощью.
Внимание
Настройка громкости:
• Отрегулируйте громкость таким образом, чтобы слышать звуки за пределами автомобиля для предотвращения аварий.
• Уменьшите громкость перед воспроизведением, чтобы предотвратить повреждение динамиков из-за внезапного повышения уровня громкости на выходе.
Общие характеристики:
• Не используйте внешние устройства, если это может отрицательно повлиять на безопасность движения.
• Убедитесь в том, что созданы резервные копии всех важных данных. Мы не несем ответственность за потерю записанных данных.
• Никогда не оставляйте металлические предметы (например, монеты или металлические инструменты) внутри устройства во избежание коротких замыканий.
Пульт дистанционного управления (RM-RK52):
• Не оставляйте пульт дистанционного управления в нагреваемых местах, таких как приборная панель.
• Литиевый аккумулятор может быть взрывоопасным при неправильной замене. Заменяйте только аккумулятором такого же или эквивалентного типа.
• Блок аккумуляторов или аккумуляторы нельзя подвергать избыточному нагреванию в солнечных лучах, огне и т.п.
ПОДГОТОВКА К
ЭКСПЛУАТАЦИИ 2
ОСНОВНЫЕ СВЕДЕНИЯ 3
НАЧАЛО ЭКСПЛУАТАЦИИ 4
1 Отмена демонстрации
2 Установка часов и даты
3 Задание базовых настроек
USB/ANDROID 5
РАДИОПРИЕМНИК 7
AUX 8
ЗВУКОВЫЕ НАСТРОЙКИ 9
НАСТРОЙКИ ДИСПЛЕЯ 11
СПРАВОЧНЫЕ МАТЕРИАЛЫ 12
Обслуживание
Дополнительная информация
УСТРАНЕНИЕ ПРОБЛЕМ 13
ТЕХНИЧЕСКИЕ
ХАРАКТЕРИСТИКИ 14
УСТАНОВКА И
ПОДКЛЮЧЕНИЕ 15
Как пользоваться данным руководством
• Операции объясняются в основном с использованием кнопок на передней панели.
• В объяснительных целях используются индикации на английском языке. Вы можете выбрать язык отображения из меню. ( 4)
• [XX] обозначает выбранные элементы.
• ( XX) означает, что материалы доступны на указанной странице.
JS_JVC_KD-X141M_M2_RU_1.indd 2JS_JVC_KD-X141M_M2_RU_1.indd 2 6/10/2016 12:17:10 PM6/10/2016 12:17:10 PM