JWA ASHTON 70487 User manual

ASSEMBLY INSTRUCTION
ASHTON DINING TABLE
ITEM CODE 70487
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose aclean, level, sparea.Avoid hard surfaces that may
damage the product
2. Take care when liꢁing. Product sembled as the
point of use
3. Ensure that you have all required co for complete assembly
4. Always read the assembly instruclly before beginning assembly.
5. Keep all hardware parts out of reach mall children.
6. Do not over ꢀ ghten the screws ydamage the threads
7. Assembly is to be carried out by acompet(s) ONLY
8. During assembly, children y from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
Allow 15 min For 2person Additional tools required
2

A.
1DINING TABLETOP
2
LEGS
BOLT M8X32MM FLAT WASHERS
B. ALLEN KEY C. PADS D.
A X16 B X16 C X1 D X8
3

1
2
2
STEP 1
A X16 B X16 C X1
A. BOLT M8X32MM B. FLAT WASHER C. ALLEN KEY
4
STEP 2
D X8
D. PADS

ASSEMBLY COMPLETE
5

To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void
6