JWA JARVIS 74679 User manual

Imported by JWA Furniture Pty Ltd, Brisbane Qld, Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1
ASSEMBLY INSTRUCTION
ITEM CODE 74679
JARV
IS Buffet

Allow 6 0min For2person Additional toolsrequired
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.
2

8mm
3

PARTSLIST
A
20pcs
M6x40mm
BCEF
J-1
O
20pcs
15x12mm
20pcs
8x30mm
1pc
M4 4pcs
3pcs
36pcs
31pcs
P
Z1 Z2
12p
cs
20pcs
1pc
GHI2
I2=2pcs
V2=12pcs
N
31pcs
V1
M3.5x12 20pcs 20pcs
12x10.5mm
4
M6x34mm
M6x15mm
I3
I3=2pcs
V2=12pcs
J-2
1pc
L
8pcs

5

STEP 1: Fix dowel (B) and cam pin (A)to panel (1) (2) (3) (4).
6
STEP 2: Fix cam pin (O)to panel (5) (6).

STEP 3: Fix rails (N-1) to panel (4) (6) with screw (V1) .
7
N-1=6
N-1 N-2

8
STEP 4: Fix panel (11) (13) (14) to panel (3) (4) with cam lock (C)
Fix panel (11) (12) (13) (14) to panel (5) (6) with cam
lock (P).

9
STEP 5:
Insert panel (7) (8) into grooves between panel
(3) (4) (5) (6).
Fix panel (1) (2) to panel (3) (4) (5) (6) with cam lock (C) .

STEP 6:Fix metal leg (J-1) (J-2) to bottom panel (2) with bolt (G) ,
lock washer (Z1), washer (Z2). Using allen key ( ) to fix
100% as shown.
H
10