JWA Sparrow 68105 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Sparrow
ITEM CODE:68105
Dining Chair
mm
mm

Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as near as possible to the
point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
7.Assembly is to be carried out by a competent adult(s) ONLY
8.During assembly, children should be kept away from the product due to possible
risk to injury.
9.Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2
PRE-ASSEMBLY PREPARATION
Allow 15 min For 1 person

3
PARTS LIST
①Front Leg x 2
②Back Legs x 2
③Seat x 1
①
②
mm
①
②
③

•Attach a Front Leg ①to the seat ③with 2 x bolts A.
Use Allen Key B to fasten the bolts. Tighten only until
the bolt is a little firm in the thread, do not fasten
completely.
4
STEP 1:
STEP 2:
•repeat step 1 to connect another Front leg ①with the
seat ③.
③
①
①
①
③

•Attach a Back Leg ②to the seat ③with 2 x bolts A.
Use Allen Key B to fasten the bolts. Tighten only until
the bolt is a little firm in the thread, do not fasten
completely.
4
STEP 3:
STEP 4:
•repeat step 3 to connect the other Back leg ②with the
seat ③.
①
①
②
③
①
①
②
③
②

5
ASSEMBLY IS COMPLETE
•Stand the chair the right way up on a level surface.
•Push down on the chair until it levels out. Do not lean
beyond your own balance.
•Once level, flip the chair back over again (upside down).
Now fully fasten all the bolts.
•Do not over tighten, as it may damage the chair.
STEP 5:

6
PRODUCT CARE:
REGULAR CARE:
•Protect from direct sunlight
•Vacuum regularly using low suction
•Rotate reversible cushions regularly
•Avoid exposure to new clothing, cushions or throws as this may lead to dye
transfer and permanent staining
CLEANING:
•Do not remove cushion covers for separate cleaning even though they may
have zippers
•Do not wash, Do not dry clean, Do not shampoo clean
•Clean only with hot water extraction machine. Professional cleaning
recommended
•Do not use dishwashing liquid or laundry detergent. Use only upholstery
detergents
•Do not wet filling
•Dry in shade away from direct heat and sunlight
•Allow to dry thoroughly before re-use
SPOT CLEANING:
•Do not rub
•Do not spot clean with any solvent
•Treat spills and stains as soon as possible
•Gently scrape off any soil or blot any liquid from the surface of the fabric before
applying cleaner
•Apply proprietary cleaning agents strictly according to instructions to remove the
residue of the spill
•Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not use
aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULTAND IS NOT COVERED BY
WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEARAND TEAR AND
DOES NOT AFFECT THE DURABILITY OR FUNCTIONALITY OF THE FABRIC
AND IS EASILY REMOVED