JWA MILLS 74698 User manual

ASSEMBLY INSTRUCTION
ITEM CODE 74698
MILLS 4 DRAWER SHOE CABINET
Imported by JWA Furniture Pty Ltd, Brisbane Qld, Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1

Allow
6
0min For2person Additional toolsrequired
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.
2

8mm
3

PARTS LIST
A
28pcs
M6x40mm
BC
28pcs
15x12mm
6pcs
8x30mm
4
64pcs
V2
M4x16
F
1pc
W
4pcs

5

STEP 1:Fix dowel (B) and cam pin (A) to panel (1) (2) (3) (4).
6

STEP 2:Fix panel (6) to panel (2) with cam lock (C).
STEP 3:Insert panel (3) (4) into the holes in the panel (2) (5) (6).
7

STEP 4:Insert panel (1) into the holes in the panel (3) (4).
8

STEP 5:Fix panel (1) (2) (5) (6) to panel (3) (4) with cam lock (C).
9

STEP 6:Fix Plastic tipping bucket (W) to panel (7) (8) (9) with
screw (V2).
10
W
W
W
W
W
W
W
W