JWA ALECTO 68046 User manual

INSERT PAGE NUMBER
Importedby JWA Furniture Pty Ltd,Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
ALECTO
68046
Ottomanfold out bed
1000
800
440mm

Allow 15 min For 2 person Additional tools
required
1
PRE-ASSEMBLYPREPARATION
Before you start:
1. Choosea clean, level, spacious assembly area. Avoid hard surfaces thatmay
damagethe product
2. Take carewhen lifting. Product should be assembled as near as possibleto the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardwareparts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damagethe threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from theproduct dueto possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for futurereference.

PART
ITEM
QTY
1
Headboard
1
2
Frame
1
3
Feet
4
PARTS LIST
1
2
3
33
3
2

STEP1:
•Prepare a floor or bench with a blanket or cardboard.
•Stand the FRAME(2) one its side, have another person
hold it.
•Screw in the 4 x FEET(3), as shown below.
3

4
ASSEMBLY IS COMPLETE
•Attached the HEADBOARD(1) to the FRAME(2) as shown
below.
•Mark certain the clipsare clicked all the way in.
STEP 2:
2

5
•Lift the headboard to an uprightposition.
•Lift and pullthe handleas shown below.
PULLING OUT THE BED
•Fullyextend the mechanism as show below.
•To retract the bed, simply reverse the process.

REGULAR CARE:
•Protect from directsunlight
•Vacuum regularly using low suction
•Rotate reversible cushions regularly
CLEANING:
•Donot removecushion covers for separate cleaning even though they
may have zippers
•Donot wash, Do not dry clean, Donot shampooclean
•Clean with hot water extraction machine. Professional cleaning
recommended
•Do not use dishwashing liquid or laundry detergent
•Use only upholstery detergents
•Do not wet filling
•Dry in shade away from direct heat andsunlight
•Allow to dry thoroughly beforere-use
SPOT CLEANING:
•Do not rub
•Do not spot clean with anysolvent
•Treat spills and stains as soon aspossible
•Gently scrapeoffany soil or mop any liquid from the surface of the fabric
•Applyproprietary cleaning agents strictly according to instructions to
remove the residue of the spill
•Donot saturate the fabric or interior with water or other cleaning liquids
WARNING:
Applyonly water-based soil resist (fabric protection) treatments. Do not
use aerosol products
* PILLINGISNOTAFABRIC DEFECTORFAULTAND ISNOT
COVERED BYWARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND DOES
NOT AFFECT THE DURABILITY ORFUNCTIONALITY OF THE FABRIC AND ISEASILY
REMOVED
6