JWA EALING 68951 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
EALING
ITEM CODE: 68951
“C” Shape Lamp Table
375MM
375MM
600MM

Before you start:
1. Choose aclean, level, spacious assembly area.Avoid hard surfaces that may damage
the product
2. Take care when lifting.Product should be assembled as near as possible to the point of
use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by acompetent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible risk to
injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2
PRE-ASSEMBLY PREPARATION
Allow 15 min For 1 person
PARTS LIST
NO DESCRIPTION QTY
11 PC
HARDWARE LIST
NO DESCRIPTION QTY
A4 PCS

• Prepare a protected surface, either with a blanket or
cardboard.
• Attach the 4x non-slip discs (A) under the plastic
stopper.
3
ASSEMBLY COMPLETED

4
PRODUCT CARE:
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly
onto your furniture as sharp material may scrape and
damage the finish.
•Do not place material with high temperature directly
onto the surface of your furniture.
•Clean up spills quickly. Water left over a prolonged
period of time may cause damage. Alcohol, perfume,
nail polishes, aftershave and some medication may
cause severe finish damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean
your furniture. Do not use any detergent as they may
contain ingredients that may react and damage the
finish.
NOTE: If the above care advise is not adhered to your
product warranty may become void