To stop the countdown:
During counting press the “TIMER” button to pause the counting.
Press “SET” to restore to the de ault time. Or press “UP” to set the time
to 00:00:00.
To set count down time:
Press “SET” button and the hour digits will lash.
Use “UP” and “DOWN” buttons to adjust the hour and press “SET” to
con irm.
Adjust the minute and the second accordingly.
ALARM OPERATION
To set the alarm time:
1) Press “MODE” button until “ALARM” is show in the display.
2) Press “SET” and the hour digits will lash. Use “UP” and “DOWN”
buttons to adjust it and press “SET” to con irm.
3) Change the minute, the length o the snooze period and the alarm
melody accordingly.
To turn on/o the alarm and the snooze unction:
In “time mode”, press “MODE” button to enter the “alarm mode”. Press
“SNOOZE”/”UP”/”DOWN” to turn on/o the alarm with/without the
snooze unction. Respective icon must be shown correctly.
At pre-set alarm time with only the alarm unction being switched on, the
unit will ring or one minute. Or you could stop the ringing by press any
button.
At pre-set alarm time with the alarm and the snooze unctions being
switched on, the unit will ring or one minute and then ring again a ter
the pre-set time period o snooze (“Snooze” icon lashes). This will
repeat twice.
Or you could stop the whole ringing process by press the “SET” button
during the ringing.
THERMOMETER
Temperature in Celsius or in Fahrenheit can be changed by pressing
the “C/F” (“DOWN”) button or the “SNOOZE LIGHT” button.
The temperature range is: 0°C-50°C (32°F-122°F).