Küppersbusch EEBP6750.0J User manual

EEBP6750.0J
User Manual
EN
Oven

CONTENTS
Safety information 2
Safety instructions 3
Product description 6
Control panel 7
Before first use 9
Daily use 9
Clock functions 13
Automatic programmes 14
Using the accessories 15
Additional functions 17
Hints and tips 18
Care and cleaning 34
Troubleshooting 37
Technical information 38
Energy efficiency 38
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and
damages. Always keep the instructions with the appliance for
future reference.
Children and vulnerable people safety
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
•Do not let children play with the appliance.
•Keep all packaging away from children.
•Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
•If the appliance has a child safety device, we recommend
you activate it.
•Cleaning and user maintenance shall not be made by
children without supervision.
•Children of less than 3 years should be kept away unless
continuously supervised.
2

General Safety
•Only a qualified person must install this appliance and
replace the cable.
•Internally the appliance becomes hot when in operation. Do
not touch the heating elements that are in the appliance.
Always use oven gloves to remove or put in accessories or
ovenware.
•Before maintenance cut the power supply.
•Ensure that the appliance is switched off before replacing
the lamp to avoid the possibility of electric shock.
•Do not use a steam cleaner to clean the appliance.
•Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
•Excess spillage must be removed before the pyrolytic
cleaning. Remove all parts from the oven.
•To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
•Only use the core temperature sensor recommended for this
appliance.
SAFETY INSTRUCTIONS
Installation
WARNING! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction supplied
with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING! Risk of fire and
electrical shock.
• All electrical connections should be
made by a qualified electrician.
3

• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the
power supply. If not, contact an
electrician.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by our
Authorised Service Centre.
• Do not let mains cables touch or come
near the appliance door, especially when
the door is hot.
• The shock protection of live and
insulated parts must be fastened in such
a way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you
disconnect the appliance from the mains
at all poles. The isolation device must
have a contact opening width of
minimum 3 mm.
• This appliance complies with the E.E.C.
Directives.
Use
WARNING! Risk of injury, burns
and electrical shock or
explosion.
• Use this appliance in a household only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance
door while the appliance is in operation.
Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
WARNING! Risk of damage to
the appliance.
• To prevent damage or discoloration to
the enamel:
– do not put ovenware or other
objects in the appliance directly on
the bottom.
– do not put aluminium foil directly on
the bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food
in the appliance after you finish the
cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel has no effect
on the performance of the appliance. It
is not a defect in the sense of the
warranty law.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
• Always cook with the oven door closed.
4

• If the appliance is installed behind a
furniture panel (e.g. a door) make sure
the door is never closed when the
appliance is in operation. Heat and
moisture can build up behind a closed
furniture panel and cause subsequent
damage to the appliance, the housing
unit or the floor. Do not close the
furniture panel until the appliance has
cooled down completely after use.
Care and cleaning
WARNING! Risk of injury, fire,
or damage to the appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
• Make sure the appliance is cold. There is
the risk that the glass panels can break.
• Replace immediately the door glass
panels when they are damaged. Contact
the Authorised Service Centre.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Remaining fat or food in the appliance
can cause fire.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety
instructions on the packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of detergent.
Pyrolytic cleaning
Risk of Injury / Fires / Chemical
Emissions (Fumes) in Pyrolitic
Mode.
• Before carrying out a Pyrolitic self-
cleaning function or the First Use please
remove from the oven cavity:
– any excess food residues, oil or
grease spills / deposits.
– any removable objects (including
shelves, side rails etc., provided with
the product) particularly any non-
stick pots, pans, trays, utensils etc.
• Read carefully all the instructions for
Pyrolytic cleaning.
• Keep children away from the appliance
while the Pyrolytic cleaning is in
operation.
The appliance becomes very hot and hot
air is released from the front cooling
vents.
• Pyrolytic cleaning is a high temperature
operation that can release fumes from
cooking residues and construction
materials, as such consumers are
strongly advised to:
– provide good ventilation during and
after each Pyrolytic cleaning.
– provide good ventilation during and
after the first use at maximum
temperature operation.
• Unlike all humans, some birds and
reptiles can be extremely sensitive to
potential fumes emitted during the
cleaning process of all Pyrolytic Ovens.
– Remove any pets (especially birds)
from the vicinity of the appliance
location during and after the
Pyrolytic cleaning and first use
maximum temperature operation to
a well ventilated area.
• Small pets can also be highly sensitive to
the localized temperature changes in the
vicinity of all Pyrolytic Ovens when the
Pyrolytic self cleaning program is in
operation.
• Non-stick surfaces on pots, pans, trays,
utensils etc., can be damaged by the
high temperature Pyrolytic cleaning
operation of all Pyrolytic Ovens and can
be also a source for low level harmful
fumes.
• Fumes released from all Pyrolytic
Ovens / Cooking Residues as described
are not harmful to humans, including
infants or persons with medical
conditions.
Internal light
• The type of light bulb or halogen lamp
used for this appliance is only for
5

household appliances. Do not use it for
house lighting.
WARNING! Risk of electrical
shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same
specifications.
Disposal
WARNING! Risk of injury or
suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
PRODUCT DESCRIPTION
General overview
2
7
1
8
4
3
5
6
5
4
3
2
1
1Control panel
2Electronic programmer
3Socket for the core temperature sensor
4Heating element
5Lamp
6Fan
7Shelf support, removable
8Shelf positions
Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
6

Grill- / Roasting pan
To bake and roast or as a pan to collect fat.
Core temperature sensor
To measure how far the food is cooked.
Telescopic runners
For shelves and trays.
CONTROL PANEL
Electronic programmer
1110987654321
Use the sensor fields to operate the appliance.
Sensor
field
Function Comment
1- Display Shows the current settings of the appliance.
2ON / OFF To activate and deactivate the appliance.
7

Sensor
field
Function Comment
3
Heating Func-
tions or Assisted
Cooking
Touch the sensor field once to choose a heating func-
tion or the menu: Assisted Cooking. Touch the sensor
field again to switch between the menus: Heating
Functions, Assisted Cooking. To activate or deacti-
vate the light, touch the field for 3 seconds. You can
activate the light also when the appliance is deactiva-
ted.
4Favourite Pro-
gramme
To save and access your favourite programmes.
5
Temperature se-
lection
To set the temperature or show the current tempera-
ture in the appliance. Touch the field for 3 seconds to
activate or deactivate the function: Fast heat up.
6Down key To move down in the menu.
7Up key To move up in the menu.
8OK To confirm the selection or setting.
9Home key To go back one level in the menu. To show the main
menu, touch the field for 3 seconds.
10
Time and addi-
tional functions
To set different functions. When a heating function
operates, touch the sensor field to set the timer or the
functions: Function Lock, Favourite Programme, Heat
+ Hold, Set + Go. You can also change the settings
of the core temperature sensor.
11 Minute Minder To set the function: Minute Minder.
Display
A
DE
B C
A) Heating function
B) Time of day
C) Heat-up indicator
D) Temperature
E) Duration time or end time of a function
8

Other indicators of the display:
Symbol Function
Minute Minder The function operates.
Time of day The display shows the current time.
Duration The display shows the necessary time
for cooking.
End Time The display shows when the cooking
time is complete.
Temperature The display shows the temperature.
Time Indication The display shows how long the heating
function operates. Press and at
the same time to reset the time.
Calculation The appliance calculates the time for
cooking.
Heat-up Indicator The display shows the temperature in
the appliance.
Fast Heat Up Indicator The function is active. It decreases the
heat up time.
Weight Automatic The display shows that the automatic
weight system is active or that weight
can be changed.
Heat + Hold The function is active.
BEFORE FIRST USE
WARNING! Refer to Safety
chapters.
Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial position.
First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast, the
display brightness and the time of the day.
1. Press or to set the value.
2. Press to confirm.
DAILY USE
WARNING! Refer to Safety
chapters.
Navigating the menus
1. Activate the appliance.
9

2. Press or to select the menu
option.
3. Press to move to the submenu or
accept the setting.
At each point you can go back
to the main menu with .
The menus in overview
Main menu
Sym
bol
Menu item Application
Assisted Cooking Contains a list of automatic programmes.
Heating Functions Contains a list of heating functions.
Pyrolysis Pyrolytic cleaning.
Basic Settings You can use it to set other settings.
Favourite Programme Contains a list of favourite cooking programmes cre-
ated by the user.
Submenu for: Basic Settings
Sym
bol
Submenu Description
Set Time of Day Sets the current time on the clock.
Time Indication When ON, the display shows the current time when
you deactivate the appliance.
Set + Go When ON, in the Select Options window you can
choose the function: Set + Go.
Heat + Hold When ON, in the Select Options window you can
choose the function: Heat + Hold.
Extra Time Activates and deactivates the time extension func-
tion.
Display Contrast Adjusts the display contrast by degrees.
Display Brightness Adjusts the display brightness by degrees.
Set Language Sets the language for the display.
Buzzer Volume Adjusts the volume of press-tones and signals by
degrees.
Key Tones Activates and deactivates the tone of the touch
fields. It is not possible to deactivate the tone of the
ON / OFF touch field.
10

Sym
bol
Submenu Description
Alarm/Error Tones Activates and deactivates the alarm tones.
Cleaning Reminder Reminds you when to clean the appliance.
Service Shows the software version and configuration.
Factory Settings Resets all settings to factory settings.
Heating Functions
Heating function Application
True Fan Cooking To bake on up to 3 shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C low-
er than for the function: Conventional Cooking.
Pizza Setting To bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature
20 - 40 °C lower than for the function: Conventional
Cooking.
Slow Cooking To prepare tender, succulent roasts.
Conventional Cooking To bake and roast food on 1 shelf position.
Frozen Foods To make your convenience food like e.g. French
Fries, Wedges, spring rolls crispy.
Turbo Grilling To roast larger meat joints or poultry with bones on 1
shelf position. Also to make gratins and to brown.
Fast Grilling To grill flat food in large quantities and to toast bread.
Grilling To grill flat food and to toast bread.
Moist Fan Baking To save energy when you bake and cook dry baked
goods. Also to bake baked goods in tins on 1 shelf
position. This function was used to define the energy
efficiency class acc. EN50304.
Keep Warm To keep food warm.
11

Heating function Application
Defrost To defrost frozen food.
Bottom Heat To bake cakes with crispy bottom and to preserve
food.
Dough Proving For controlled rising of yeast dough before baking.
Bread Baking To bake bread.
Au Gratin For dishes such as lasagna or potato gratin. Also to
gratinate and brown.
Preserving To make vegetable preserves such as pickles.
Drying To dry sliced fruit (e.g. apples, plums, peaches) and
vegetables (e.g. tomatoes, zucchini, mushrooms).
Plate Warming To preheat your plate for serving.
ECO Roasting The ECO functions let you optimize the energy con-
sumption during cooking. It is necessary to set the
cooking time first. To get more information about the
recommended settings, refer to the cooking tables
with the equivalent function.
Activating a heating function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press to confirm.
4. Set a heating function.
5. Press to confirm.
6. Set the temperature.
7. Press to confirm.
Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold for 3
seconds. The heat-up indicator alternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
12

CLOCK FUNCTIONS
Clock functions table
Clock function Application
Minute Minder To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use to activate the function. Press or
to set the minutes and to start.
Duration To set the length of an operation (max. 23 h 59
min).
End Time To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the
appliance deactivates the
heating elements after 90 % of
the set time. The appliance uses
the residual heat to continue the
cooking process until the time
ends (3 - 20 minutes).
Setting the clock functions
• Before you use the functions:
Duration, End Time, you
must set a heating function
and temperature first. The
appliance deactivates
automatically.
• You can use the functions:
Duration and End Time at the
same time if you want to
automatically activate and
deactivate the appliance on a
given time later.
• The functions: Duration and
End Time do not work when
you use the core temperature
sensor.
1. Set a heating function.
2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press or to set the necessary
time.
4. Press to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the signal.
Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It
activates after the baking or roasting
procedure ends.
You can activate or deactivate the function
in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the
display shows: Heat + Hold.
5. Press to confirm.
13

When the function ends, an acoustic signal
sounds.
The function stays on if you change the
heating functions.
Extra Time
The function: Extra Time makes the heating
function continue after the end of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press a sensor
field.
The display shows the message.
2. Press to activate or to cancel.
3. Set the length of the function.
4. Press .
AUTOMATIC PROGRAMMES
WARNING! Refer to Safety
chapters.
Assisted Cooking with Recipe
Automatic
This appliance has a set of recipes you can
use. The recipes are fixed and you cannot
change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press to confirm.
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press to confirm.
When you use the function:
Manual, the appliance uses the
automatic settings. You can
change them as with other
functions.
Assisted Cooking with Weight
Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press to confirm.
3. Select the category and dish. Press
to confirm.
4. Select the function: Weight Automatic.
Press to confirm.
5. Touch or to set the food weight.
Press to confirm.
The automatic programme starts.
6. You can change the weight at any time.
Press or to change the weight.
7. When the time ends, an acoustic signal
sounds. Press a sensor field to
deactivate the signal.
With some programmes turn
over the food after 30 minutes.
The display shows a reminder.
14

USING THE ACCESSORIES
WARNING! Refer to Safety
chapters.
Core temperature sensor
There are two temperatures to be set: the
oven temperature and the core
temperature.
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the
appliance deactivates.
CAUTION! Only use the core
temperature sensor supplied or
the correct replacement parts.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
1. Activate the appliance.
2. Put the tip of the core temperature
sensor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of the
appliance.
The display shows the core temperature
sensor symbol.
4. Press or in less than 5 seconds
to set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The appliance calculates an approximate
end time. The end time is different for the
different quantities of the food, the set oven
temperatures (minimum 120 °C) and the
operating modes. The appliance calculates
the end time in approximately 30 minutes.
6. To change the core temperature, press
.
When the meat is at the set core
temperature, an acoustic signal sounds.
The appliance deactivates automatically.
7. Touch a sensor field to stop the signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
WARNING! The core
temperature sensor is hot. There
is a risk of burns. Be careful
when you remove the tip and
the plug of the core temperature
sensor.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide bars
of the shelf support.
15

Wire shelf and the deep pan together:
Push the deep pan between the guide bars
of the shelf support and the wire shelf on
the guide bars above.
• All accessories have small
indentations at the top of the
right and left side to increase
safety. The indentations are
also anti-tip devices.
• The high rim around the shelf
is a device which prevents
cookware from slipping.
Telescopic runners - inserting
the accessories
CAUTION! Make sure you push
back the telescopic runners fully
in the appliance before you
close the oven door.
Wire shelf:
Put the wire shelf on the telescopic runners
so that the feet point downwards.
The high rim around the wire
shelf is a special device to
prevent the cookware from
slipping.
Baking tray or deep pan:
Put the baking tray or deep pan on the
telescopic runners.
Wire shelf and deep pan together:
Put the wire shelf on the deep pan. Put the
wire shelf and the deep pan on the
telescopic runners.
16

ADDITIONAL FUNCTIONS
Favourite Programme
You can save your favourite settings, such
as duration, temperature or heating
function. They are available in the menu:
Favourite Programme. You can save 20
programmes.
Saving a programme
1. Activate the appliance.
2. Set a heating function or an automatic
programme.
3. Touch again and again until the
display shows: SAVE.
4. Press to confirm.
The display shows the first free memory
position.
5. Press to confirm.
6. Enter the name of the programme.
The first letter flashes.
7. Touch or to change the letter.
8. Press .
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold to save.
You can overwrite a memory position.
When the display shows the first free
memory position, touch or and press
to overwrite an existing programme.
You can change the name of a programme
in the menu: Edit Programme Name.
Activating the programme
1. Activate the appliance.
2. Select the menu: Favourite Programme.
3. Press to confirm.
4. Select your favourite programme name.
5. Press to confirm.
Press to go directly to menu: Favourite
Programme. You can also use it when the
appliance is deactivated.
Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
If the Pyrolysis function
operates, the door locks
automatically.
A message comes on in the
display when you touch a
sensor field.
1. Activate the appliance.
2. Touch and at the same time until
the display shows a message.
To deactivate the Child Lock function
repeat step 2.
Function Lock
This function prevents an accidental change
of the heating function. You can activate it
only when the appliance operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
If the Pyrolysis function
operates, the door is locked and
the symbol of a key comes on in
the display.
To deactivate the function, press . The
display shows a message. Press again
and then to confirm.
When you deactivate the
appliance, the function also
deactivates.
17

Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of a sensor field.
1. Activate the appliance.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press a sensor field (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings
lets you activate and
deactivate the function: Set +
Go.
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time if
a heating function operates and you do not
change any settings.
Temperature (°C) Switch-off time
(h)
30 - 115 12.5
Temperature (°C) Switch-off time
(h)
120 - 195 8.5
200 - 245 5.5
250 - maximum 1.5
The Automatic switch-off does
not work with the functions:
Light, core temperature sensor,
End Time, Duration.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– if the appliance is deactivated and
you set the function: Minute Minder.
When the function ends, the display
goes back to the night brightness.
Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
HINTS AND TIPS
WARNING! Refer to Safety
chapters.
The temperature and baking
times in the tables are guidelines
only. They depend on the
recipes and the quality and
quantity of the ingredients used.
Advice for special heating
functions of the oven
Keep Warm
Use this function if you want to keep food
warm.
18

The temperature regulates itself
automatically to 80 °C.
Plate Warming
For warming plates and dishes.
Distribute plates and dishes evenly on the
wire shelf. Move stacks around after half of
the warming time (swap top and bottom).
The automatic temperature is 70 °C.
Recommended shelf position: 3.
Dough Proving
You can use this automatic function with
any recipe for yeast dough you like. It gives
you a good atmosphere for rising. Put the
dough into a dish that is big enough for
rising and cover it with a wet towel or
plastic foil. Insert a wire shelf on the first
shelf position and put the dish in. Close the
door and set the function: Dough Proving.
Set the necessary time.
Baking
• Your oven can bake or roast differently
to the appliance you had before. Adapt
your usual settings (temperature,
cooking times) and shelf positions to the
values in the tables.
• The manufacturer recommends that you
use the lower temperature the first time.
• If you cannot find the settings for a
special recipe, look for the one that is
almost the same.
• You can extend baking times by 10 – 15
minutes if you bake cakes on more than
one shelf position.
• Cakes and pastries at different heights
do not always brown equally at first. If
this occurs, do not change the
temperature setting. The differences
equalize during the baking procedure.
• With longer baking times, you can
deactivate the oven approximately 10
minutes before the end of the baking
time and then use the residual heat.
When you cook frozen food, the trays in the
oven can twist during baking. When the
trays become cold again, the distortions are
gone.
Tips on baking
Baking results Possible cause Remedy
The bottom of the cake is not
browned sufficiently.
The shelf position is incor-
rect.
Put the cake on a lower shelf.
The cake sinks and becomes
soggy, lumpy or streaky.
The oven temperature is too
high.
The next time you bake, set a
slightly lower oven tempera-
ture.
The cake sinks and becomes
soggy, lumpy or streaky.
The baking time is too short. Set a longer baking time.
You cannot decrease bak-
ing times by setting higher
temperatures.
The cake sinks and becomes
soggy, lumpy or streaky.
There is too much liquid in
the mixture.
Use less liquid. Be careful
with mixing times, especially
if you use a mixing machine.
The cake is too dry. The oven temperature is too
low.
The next time you bake, set a
higher oven temperature.
19

Baking results Possible cause Remedy
The cake is too dry. The baking time is too long. The next time you bake, set a
shorter baking time.
The cake browns unevenly. The oven temperature is too
high and the baking time is
too short.
Set a lower oven temperature
and a longer baking time.
The cake browns unevenly. The mixture is unevenly dis-
tributed.
Spread the mixture evenly on
the baking tray.
The cake is not ready in the
baking time given.
The oven temperature is too
low.
The next time you bake, set a
slightly higher oven tempera-
ture.
Baking on one level:
Baking in tins
Food Function Temperature
(°C)
Time (min) Shelf position
Ring cake /
Brioche
True Fan
Cooking
150 - 160 50 - 70 1
Madeira cake /
Fruit cakes
True Fan
Cooking
140 - 160 70 - 90 1
Fatless sponge
cake / Fatless
sponge cake
True Fan
Cooking
140 - 150 35 - 50 2
Fatless sponge
cake / Fatless
sponge cake
Conventional
Cooking
160 35 - 50 2
Flan base -
short pastry
True Fan
Cooking 170 - 1801) 10 - 25 2
Flan base -
sponge mixture
True Fan
Cooking
150 - 170 20 - 25 2
Apple pie / Ap-
ple pie (2 tins
Ø20 cm, diago-
nally off set)
True Fan
Cooking
160 60 - 90 2
Apple pie / Ap-
ple pie (2 tins
Ø20 cm, diago-
nally off set)
Conventional
Cooking
180 70 - 90 1
20