Kallista P34500 User manual

INSTALLATION INSTRUCTIONS
Accessories
1121256_2_A
1 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
P34500
P34508
P34506
P34510

INSTALLATION INSTRUCTIONS
Accessories
1121256_2_A
2 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
ThANk YOU FOR ChOOSINg kALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BeFORe YOU BegIN
Observe all local building codes.
Prior to installation, unpack the new product and inspect it for damage. Return the product to its protective
carton until you are ready to install it.
TOOLS ANd MATeRIALS
LevelPencil
Tape
Measure SafetyGlasses
Drill
Phillips
Screwdriver
Hex
Wrench

INSTALLATION INSTRUCTIONS
Accessories
1121256_2_A
3 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
ROUgh-IN INFORMATION
2-1/4”
(5.8 cm)
3-1/8”
(7.8 cm)
24”
(61 cm)
25-5/8”
(65.1 cm)
P34500
1-5/8”
(4.1 cm)
1-1/2”
(3.8 cm)
2-1/4”
(5.8 cm)
3-1/8”
(7.8 cm)
P34506
3”
(7.8 cm)
2-1/4”
(5.8 cm)
6-1/2”
(16.6 cm)
8-1/8”
(20.7 cm)
P34508
3”
(7.8 cm)
2-1/4”
(5.8 cm)
1-5/8”
(4.1 cm)
6-5/8”
(16.8 cm)
6-1/2”
(16.4 cm)
P34510

INSTALLATION INSTRUCTIONS
Accessories
1121256_2_A
4 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
INSTALL The P34500 TOweL BAR1.
Anchors
(if using)
Mounting Plate
Wood Screws
Anchors
(if using)
Mounting Plate
Wood Screws
Set Screw
Set Screw
Towel Bar Assembly
Refer to the rough-in information to determine the location of the mounting plates.
Mark the location of the mounting plate holes on the nished wall, making sure that the mounting plates will 
be level when mounted.
If drilling into a stud, drill pilot holes for the wood screws. If there is not a stud behind the mounting plate
location, drill holes to accommodate the anchors.
Install the anchors, if using. Attach the mounting plates to the nished wall with the wood screws.
Secure the towel bar assembly to the mounting plates with the set screws.

INSTALLATION INSTRUCTIONS
Accessories
1121256_2_A
5 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
INSTALL The P34506 hOOk2.
Anchors
(if using)
Mounting Plate
Wood Screws
Set Screw
Hook Assembly
Refer to the rough-in information to determine the location of the mounting plate.
Mark the location of the mounting plate holes on the nished wall.
If drilling into a stud, drill pilot holes for the wood screws. If there is not a stud behind the mounting plate
location, drill holes to accommodate the anchors.
Install the anchors, if using. Attach the mounting plate to the nished wall with the wood screws.
Secure the hook assembly to the mounting plate with the set screw.

INSTALLATION INSTRUCTIONS
Accessories
1121256_2_A
6 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
INSTALL The P34508 TISSUe hOLdeR3.
Anchors
(if using)
Mounting Plate Wood Screws
Anchors
(if using)
Mounting Plate
Wood Screws
Set Screw
Set Screw
Pivoting Tissue Holder
Arm Assembly
Fixed Tissue Holder
Arm Assembly
Location of Pivoting Tissue
Holder Arm Assembly
C
L
Refer to the rough-in information to determine the location of the mounting plate for the xed tissue holder 
arm assembly.
Mark the location of the xed tissue holder arm assembly mounting plate holes on the nished wall.
If drilling into a stud, drill pilot holes for the wood screws. If there is not a stud behind the mounting plate
location, drill holes to accommodate the anchors.
Install the anchors, if using. Attach the mounting plate to the nished wall with the wood screws.
Secure the xed tissue holder arm assembly to the mounting plate with the set screw.
Place the pivoting tissue holder arm assembly on the wall so that it is supported by, and level to, the xed 
tissue holder arm assembly. Mark the location of the pivoting tissue holder arm assembly on the wall.
Set the pivoting tissue holder arm assembly aside and mark the centerline of the pivoting tissue holder arm
assembly on the wall.
Remove the xed tissue holder arm assembly from its mounting plate. With a level, transfer the location of 
the wood screw centers to the centerline of the pivoting tissue holder arm assembly.
If drilling into a stud, drill pilot holes for the wood screws. If there is not a stud behind the mounting plate
location, drill holes to accommodate the anchors.
Install the anchors, if using. Attach the mounting plate to the nished wall with the wood screws.
Re-secure the xed tissue holder arm assembly to the mounting plate with the set screw.
Secure the pivoting tissue holder arm assembly to the mounting plate with the set screw.
Check the pivoting tissue holder arm assembly for proper operation. If necessary, loosen set screw and
adjust pivoting tissue holder arm assembly left or right, as needed.

INSTALLATION INSTRUCTIONS
Accessories
1121256_2_A
7 of 7
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
INSTALL The P34510 TOweL RINg4.
Anchors
(if using)
Mounting Plate
Wood Screws
Set Screw
Towel Ring
Assembly
Refer to the rough-in information to determine the location of the mounting plate.
Mark the location of the mounting plate holes on the nished wall.
If drilling into a stud, drill pilot holes for the wood screws. If there is not a stud behind the mounting plate
location, drill holes to accommodate the anchors.
Install the anchors, if using. Attach the mounting plate to the nished wall with the wood screws.
Secure the towel ring assembly to the mounting plate with the set screw.