Kamasa-TOOLS K 12101 User manual

K 12101Videoscope

2
INRODUCTION
This videoscope with it’s compact design and 3.5 inch screen is a perfect
help in any workshop when inspecting areas that normally are hidden for
the eye. Read through this manual to learn about the features of this vide-
oscope and how to maximize it’s benefits in your daily work.
SAFETY AND PRECAUTION
• To avoid danger, do not insert the probe into any area containing flam-
able liquid or gas such as fuel tanks.
• The rubber cover over the sockets for USB and SD card shall always be
kept closed to avoid obstructive dirt from entering the instrument.
• In order to avoid damage to the probe, never bend it more than 180°
and try to make bending arcs as large as possible.
• This product is designed for industrial use only. Never use the system
for human or any other biological inspection.
• Do not remove the SD card when capturing photos and videos. This will
cause a loss of information and the risk of damaging the SD card.
• Video recording requires an SD card with fast writing speed. We recom-
mend 80X or more for better video quality.
• Use the cleaning set included at the delivery or other non alcoholic
cleaning liquid.
• Please use only recommended component or accessories. Unapproved
accessories and components may cause damage.

3
PRODUCT SPECIFICATION
Battery cover in the back
Device Connector
Screen
SD card socket
Video out
USB out Function keys
Main system
System dimension 140×116×42 mm
System weight 300g (w/o battery)
Display 3.5” TFT LCD QVGA
Display resolution 320×240 pixels
Power AA×4 (Alkaline or Ni-HM)
Battery life 4 hours
Recording medium SD CARD (Support to 32G)
Video out format NTSC & PAL
Interface AV out
File format AVI, JPEG
Video resolution 320×240, 30 FPS
Image resolution 640×480 pixels
Water proof Splash water ( the rubber comporent covers should be closed)
Working temperature 0ºC~60 ºC
Storage temperature 0ºC~60 ºC

4
Step 2: Place battery correctly, put the battery cover back.
Step 3: Tighten the screw.
GETTING STARTED
Step 1: Remove the battery cover.
Step 4: Connect probe to the system and tighten it up clockwise.
The color markings shall coincide.

5
Step 5: Insert SD memory card correctly, the screen will then show
memory card capacity while the system is turned on.
Step 8: After the system is turned ON,
you can start your inspection.
Press the snap or record button to get
an image or video file.
Step 7: The camera in the probe can be
directed forward or 90° sideways.
• Press the button marked A on the
illustration for forward camera.
• Press the button marked B on the
illustration for side view camera.
Step 6: Press power button
for 3 seconds to turn on the system.
A
A
BB
2010/09/22 12:35:45
2010/09/22 12:35:45

6
MULTIFUNCTION KEYS
Key Preview Browse Menu
Increase brightness Right N/A
Decrease brightness Left N/A
Enter “Menu” mode Delete Execute confirm instruction
Zoom-in Up Up
Mirror Down Down
Enter “Browse” mode Return to “Preview” mode Return to “Preview” mode
Snapshot Play video / Pause N/A
Record video N/A N/A
System time
Battery indicator
Memory card capacity
2010/09/22 12:35:45

7
SYSTEM MODE
This system provides 3 easy-to-operate modes:
Preview: This mode is activated when the system turn on.
Browse: The user may view recorded pictures and videos and conduct
basic file management.
Menu: Use this mode to change system settings.
Note: Under the “Menu” mode, the system will automatically return to the
“Preview” mode in 3 minutes if no action is made.

8
SYSTEM MENU
Step1: Press to enter the Menu mode.
Step2: Press or to choose the item you need.
Step3: Press to enter.
Instructions which can be executed on the menu are listed as below:
Delete All Files
After initiating this command, select "yes" or "no" by
pressing or buttons. To delete all, select "yes"
press the button to exit.
AV Output
This command will send the video signal out through
the AV port. The screen of the device will turn black
until you execute this command again.
Date / Time
• Format: Set up the sequence of day, month, year.
• Setting: Set the device’s time.
Step1: Press or button to choose day, month or year
to be changed.
Step2: Press the button or to adjust figures.
• Display: Press “Yes” to show up the time on Preview mode.
Language
To set up operation language.
TV System
Set video format, NTSC or PAL.
Auto Power O
Set up auto power off in 5, 10, 15 or 30 minutes, or you can disable the
"Auto power off" function by selecting “Off”.
SETTINGS
2010/09/22 12:35:45
2010

9
Default image Enlarged 3× Enlarged 5×
Zoom-in & Mirror
Zoom-in: Press to enlarge the image, press again to enlarge more, and
press it again to the default image setting.
OPERATION INSTRUCTIONS
Mirror: Press to mirror the image. Press it again to rotate the image.
Adjust the brightness
Press or to adjust brightness.
Taking Photos
Press button during Preview mode to take the photo. If the bottom of
the screen displays the file name, then your file is properly saved.
Video Recording
Press button during Preview mode to record the video, press again to
stop recording. In the recording process, the recording time is displayed on
the screen. If the bottom of the screen displays the file name (.avi), then
your file is properly saved.
Viewing photos/videos
Step 1: Press to enter the Browse mode.
Step 2: Press or to view the previous or second to last photo/video.
Step 3: Press to delete a file, press again to confirm
or press to cancel.
Step 4: Press to play a video.
Default image Mirror Upside down Mirror and Upside down

10

11

www.kamasatools.com
K 12101
Kamasa Tools is a registered trademark of KG Knutsson AB, 191 81 Sollentuna, Sweden
CE declaration for this product is available as a file on www.kamasatools.com