Kambrook KRH110 User manual

Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue A13
Kambrook - New Zealand
Private Bag 94411
Botany, Manukau
Auckland 2163
New Zealand
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax [phone]
www.kambrook.co.nz
Kambrook - Australia
Building 2, Port Air Industrial Estate
1A Hale Street
Botany NSW 2019
Australia
Customer Service Line 1300 139 798
Customer Service Fax [phone]
www.kambrook.com.au

Instruction Booklet
Radiant
Heater
KRH110

Important
Please retain your instruction
book for future use.
In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 0800 273 845
(New Zealand). Alternatively, visit us on our website at
www.kambrook.com.au or www.kambrook.co.nz

Contents
Kambrook Recommends
Safety First
p4
Your Kambrook Radiant Heater p7
Using Your Kambrook
Radiant Heater
P8
Care, Cleaning and Storage p9

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Radiant Heater
• Carefully read all instructions before
operating the radiant heater and save for
future reference.
• Remove any packaging material and
promotional stickers before using the radiant
heater for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this radiant heater.
• Avoid touching the radiant heater body
while it is on as some parts of the heater
are hot. When moving the unit switch off
and hold the radiant heater by the handles
where provided.
• Always keep combustible materials such
as drapes and other furnishing at least 1.7
meters away from the front sides and of the
radiant heater.
• To prevent a possible fire or heat damage,
allow ample space around the radiant
heater (at least 1.7m from the front, 1.0m at
the top and 0.5m at the rear and sides of the
radiant heater when it is intended for floor
use) and do not totally or partially covered
the radiant heater in any manner.
• Check the unit’s openings from time to time
for accumulated dust.
• Do not cover the radiant heater whilst it
is operating.
• Extreme caution and supervision is necessary
when this radiant heater is used by or near
children, invalids or animals.
• This radiant heater is intended for floor use
only. Do not mount on ceiling or walls.
• Do not leave the radiant heater unattended.
Always switch off the radiant heater at the
controls and at the power outlet then unplug
from the power outlet when not in use.
• Do not use the radiant heater to dry
your laundry.
• Do not operate the radiant heater
whilst asleep.
• Do not use outdoors. This radiant heater is
not intended for commercial use such as
construction sites.
• Do not locate the radiant heater
immediately below and in front of a socket
outlet when in use.
• Do not use this radiant heater with an
external programmer, timer, or any other
devices that switches the radiant heater
automatically, since a fire risk may exist if
the radiant heater is covered or positioned
incorrectly.
• This radiant heater is not intended for use in
wet and moist locations. Do not immerse or
allow liquids to be spilt on the radiant heater.
• Do not use this radiant heater in the
immediate surroundings of a bath, a shower
or a swimming pool.

5
• This radiant heater has hot and arcing or
sparking parts inside. Do not use in areas
where petrol, paints, aerosols, or other
inflammable substances are used or stored.
• Do not operate the radiant heater with the
power cord damaged, frayed or split, wound
around any part of the radiant heater or
in contact with the heated surfaces of the
radiant heater.
• Do not operate any heater with a damaged
cord or plug, or if heater has been dropped
or damaged in any manner. Return heater to
your nearest service centre for examination,
electrical or mechanical adjustment
or repair.
• Do not run the cord under carpeting or cover
the cord with rugs, runner or the like. Arrange
the cord away from traffic areas and where it
will not be tripped over.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard
• Do not insert or allow foreign objects to pass
through the inlet and outlet openings. This
may cause an electric shock, fire or damage
to the radiant heater.
• Do not touch hot surfaces.
• Use this radiant heater only as described in
this instructions manual. Any other use not
recommended by the manufacturer may
cause fire, electric shock or injury and voids
all warranties.
• Do not place the radiant heater near the
edge of a bench or table during operation.
Ensure that the surface is level, clean and
free of water and other substances.
• Keep the radiant heater clean. Follow the
cleaning instructions provided in this book.
• Always ensure the radiant heater is properly
assembled before use. Follow the instructions
provided in this book.
• Do not leave the radiant heater unattended
when in use.
• Do not operate the radiant heater on a sink
drain board.
• Do not allow materials that have been in
contact with oil, petroleum based products
or drying fluids to come in contact with
the heater.
• Do not operate the radiant heater on an
incline plane. Do not move while the radiant
heater is switched on.
• To avoid an electrical overload, it is
recommended that no other appliances are
plugged into the same circuit as your radiant
heater when it is in use.
• The heater is not intended to be installed
adjacent to each other.
• The heater is not intended to be installed
in wardrobes.
• Warning: do not adjust this heater.
• The heater is to be installed so that switches
and other controls cannot be touched by a
person in the bath or shower.
• The heater must not be installed in front of a
socket-outlet.

6
Important Safeguards For All Electrical
Appliances
• Fully unwind the power cord before use.
• Connect only to 230V or 240V power outlet.
• Do not let the power cord hang over the
edge of a bench or table, touch hot surfaces
or become knotted.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid or
allow moisture to come in contact with
the part, unless it is recommended in the
cleaning instructions.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• It is recommended to regularly inspect the
appliance. To avoid a hazard, do not use
the appliance if power cord, power plug or
appliance becomes damaged in any way.
Return the entire appliance to the nearest
authorized Kambrook service centre for
examination and / or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Kambrook Service Centre.
• This appliance is for household use only. Do
not use this appliance for anything other
than its intended use. Do not use in moving
vehicles or boats. Do not use outdoors.
Misuse may cause injury.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
• Always turn the appliance to the OFF
position, switch off at the power outlet
and unplug at the power outlet when the
appliance is not in use.
• Before cleaning, always turn the appliance
to the OFF position, switch off at the power
outlet, unplug at the power outlet and
remove the power cord, if detachable, from
the appliance and allow all parts to cool.
• Do not place this appliance on or near
a heat source, such as hot plate, oven
or heaters.
• Position the appliance at a minimum
distance of 20cm away from walls, curtains
and other heat or steam sensitive materials
and provide adequate space above and on
all sides for air circulation.
IMPORTANT:In order to
avoid overheating, do not
cover the radiant heater.
WARNING:Fire risk exists
if the heater is covered
by or positioned close
to curtains or other
combustible materials.
IMPORTANT:Never
operate the radiant
heater without the front
grill securely in position.
WARNING:Children
should be supervised to
ensure that they do not
play with the heater.

7
Your Kambrook Radiant Heater
1. Heater elements
2. Safety grill
3. Wall mounting bracket
4. Neon Power On/Off indicator light
Not Shown
• Power On/Off pull cord

8
Using Your Kambrook Radiant Heater
Before first use
Remove your heater from its carton
and associated protective wrapping.
Unwind the cord to its full length and
remove any protective cardboard
or foam that may have been used
to minimise transportation damage.
Place the heater on a firm, level
surface in a stable upright position.
Visually inspect the air inlet and
outlets to ensure no foreign material is
blocking these areas.
Turning Your Heater On
NOTE: To avoid an electrical
circuit overload, it is
recommended that no other
appliances are plugged into the
same circuit with your heater when
you switch the unit on.
1. Your heater must be wall
mounted and no closer that
25cm to ceiling, 200cm to floor,
25cm to side walls.
2. Remove the mounting bracket
from the rear of the heater and
secure to the wall with the five
screws supplied. To wall mount
correctly, ensure the bracket
is placed on the wall so that
the keyhole slots have two on
top, and one on the bottom
(See Fig.1).
Fig. 1
NOTE: Fixed wire installations
should be performed by a
qualified electrician.
3. Hook heater base onto mounting
bracket on wall aligning the
heater base clips on the mounting
bracket and slide downwards to
fit in position (See Fig.2).
Fig. 2
4. Plug the power cord into a 230V
or 240V electrical outlet. Be sure
the plug fits tightly as a loose
fit will cause overheating and
damage the plug.
5. To switch the heater on, pull the
Power On/Off cord until it clicks
and the neon light illuminates.
6. To switch heater off, pull the
Power On/Off cord again
until it clicks and the neon
light goes out.

9
Care, Cleaning and Storage
Ensure that the heater is switched OFF
and disconnected from the power
outlet before cleaning.
•Use a clean, dry cloth to clean the
external surfaces of the heater. If
the heater has collected dust or
dirt inside the unit or around the
elements, have the unit cleaned
by a qualified service agent.
Do not operate the heater in
this condition.
•Do not attempt to open the case
of the heater at any time as there
are no customer serviceable parts
inside. When not in use, store the
heater (preferably in its original
box) in a cool, clean and dry
location.
Hints & Tips to Retain Heat in
Your Home
•Don’t overheat your home. The
temperature of a heated room in
winter should be 18–21°C.
•Your heater will work more
efficiently if you stick to Kambrook’s
recommended clearance spaces.
•Choose the right size heater for the
room type you want to heat.
•Zone off unoccupied rooms by
closing doors and only heat the
main living areas. Fit window
coverings like curtains to halve
winter heat loss.
•Put draft stoppers, such as a rolled
up towel, at the bottom of outside
doorways to keep out cold air.
•Keep the heat in and the cold
out by installing wall and
ceiling insulation.
•Avoid placing items too close to
the heater (both at the front and
back) for optimal air flow.

10
Notes

11
Notes