Kambrook Suits KFH600 User manual

Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue B13
Kambrook - New Zealand
Private Bag 94411
Botany, Manukau
Auckland 2163
New Zealand
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax [phone]
www.kambrook.co.nz
Kambrook - Australia
Building 2, Port Air Industrial Estate
1A Hale Street
Botany NSW 2019
Australia
Customer Service Line 1300 139 798
Customer Service Fax [phone]
www.kambrook.com.au
Care, Cleaning and Storage
•Ensure that the heater is switched
OFF and disconnected from the
power outlet before cleaning.
•Use a clean, dry cloth to clean
the external surfaces of the heater.
If the heater has collected dust or
dirt inside the unit or around the
elements, have the unit cleaned
by a qualified service agent.
Do not operate the heater in
this condition.
•Do not attempt to open the case
of the heater at any time as there
are no customer serviceable
parts inside.
•When not in use, store the heater
(preferably in its original box) in a
cool, clean and dry location.

Instruction Booklet
Upright
Fan Heater
Suits KFH600/610/660 models

Important
Please retain your instruction
book for future use.
In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 0800 273 845
(New Zealand). Alternatively, visit us on our website at
www.kambrook.com.au or www.kambrook.co.nz

Contents
Kambrook Recommends
Safety First
p4
Your Kambrook Upright Fan Heater p7
Quick Start Guide p8
Using Your Kambrook Heater p10
Care, Cleaning and Storage p12

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Upright Fan Heater
• Carefully read all instructions before
operating the fan heater for the first time and
save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the fan heater for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this fan heater.
• Always ensure the fan heater is properly
assembled before use. Follow the instructions
provided in this book.
• Extreme caution and supervision is necessary
when this fan heater is used by or near
children or invalids.
• Extreme caution and supervision is necessary
when this fan heater is used near animals.
• Do not operate the fan heater on a sink or
drain board.
• Do not allow materials that have been in
contact with oil, petroleum based products
or drying fluids to come in contact with the
fan heater.
• Do not operate the fan heater on an incline
plane. Do not move while the fan heater is
switched on.
• Do not place the fan heater near the edge
of a bench or table during operation. Ensure
the surface is level, clean and free of water
and other substances.
• Always keep combustible materials such
as drapes and other furnishings at least 1.7
meters from the front, sides and rear of the
heater.
• To prevent a possible fire or heat damage,
allow ample space around the fan heater (at
least 1.7m from the front and at the top and
0.5m at the rear and sides of the fan heater
when it is intended for floor use) and do not
totally or partially covered the fan heater in
any manner. Check the unit’s openings from
time to time for accumulated dust. Ensure
long shag carpet does not obstruct airflow
of the unit.
• In order to avoid overheating do not cover
the fan heater.
• Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
• Do not locate the fan heater immediately
below and in front of a socket outlet when
in use.
• Do not insert or allow foreign objects to pass
through the inlet or outlet openings. This may
cause an electric shock, fire or damage to
the fan heater.
• Do not touch hot surfaces.
• Avoid touching fan heater body while it is on,
some parts of the fan heater are hot. When
moving the unit switch off and hold the fan
heater by the handles where provided.

5
• Do not leave the fan heater unattended
during use. Always switch off the fan heater
at the controls and at the power outlet then
unplug heater from the power outlet when
not in use.
• Do not use the fan heater to dry your laundry.
• Do not operate fan heater whilst asleep.
• Do not use outdoors. This fan heater is
not intended for commercial use such as
construction sites.
• Do not use this fan heater with an external
programmer, timer or any other devices that
switches the fan heater ON automatically
since a fire risk may exist if the heater is
covered or positioned incorrectly.
• KFH600 heater is not equipped with a device
to control the room temperature. Do not use
KFH600 heater in small rooms when they are
occupied by persons not capable of leaving
the room on their own, unless constant
supervision is provided.
• This fan heater is not intended for use in wet
or moist locations. Do not immerse or allow
liquids to be spilt on the fan heater.
• This fan heater has hot and arcing or
sparking parts inside. Do not use in areas
where petrol, paints, aerosols, or other
inflammable substances are used or stored.
• Do not operate the fan heater with the
power cord damaged, frayed or split,
wound around any part of the fan heater,
or in contact with the heated surfaces of
the fan heater.
• Do not run the cord under the carpeting or
cover the cord with rugs, runners or the like.
Arrange the cord away from traffic areas
and where it will not be tripped over or
create a tripped hazard.
• Do not operate any fan heater with a
damaged cord or plug, or if fan heater has
been dropped or damaged in any manner.
Return fan heater to your nearest Kambrook
service centre for examination, electrical or
mechanical adjustment or repair.
• Use this fan heater only as described in
this instruction manual. Any other use not
recommended by the manufacture may
cause fire electric shock or injury and voids
all warranties.
• To avoid an electrical overload. It is
recommended that no other appliances are
plugged into the same circuit as your fan
heater when it is in use.
• This heater features a tip-over switch.
If the heater tips over, it will automatically
switch off. Once placed back in the upright
position the heater will automatically switch
on again.
• Switch off at the main On/Off switch and the
power outlet, then unplug and allow heater
to cool down before cleaning or storing.
• Regularly inspect the supply cord, plug,
control settings, air inlets and outlets and
main housing for any damage, If found
damaged in any way, immediately cease
use of the fan heater and return to Kambrook
or an authorised service agent for inspection
or repair.
• Keep the fan heater clean. Follow the
cleaning instructions provided in this book.
• Do not mount heater on ceiling or walls.

6
Important Safeguards For All Electrical
Appliances
• Fully unwind the power cord before use.
• Connect only to 230V or 240V power outlet.
• Do not let the power cord hang over the
edge of a bench or table, touch hot surfaces
or become knotted.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid,
unless it is recommended in the cleaning
instructions.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance,
by a person responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if the
power supply cord, plug, connector or
appliance becomes damaged in any way.
Return the entire appliance to the nearest
authorised Kambrook Service Centre for
examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Kambrook Service Centre.
• This appliance is for household use only.
Do not use this appliance for other than its
intended use. Do not use in moving vehicles
or boats. Do not use outdoors. Misuse may
cause injury.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.
• Always turn the appliance to the OFF
position, switch off at the power outlet
and unplug at the power outlet when the
appliance is not in use.
• Before cleaning, always turn the appliance
to the OFF position, switch off at the power
outlet, unplug at the power outlet and
remove the power cord, if detachable, from
the appliance and allow all parts to cool.
• Do not place this appliance on or near
a heat source, such as hot plate, oven or
heaters.
• Position the appliance at a minimum
distance of 20cm away from walls, curtains
and other heat or steam sensitive materials
and provide adequate space above and on
all sides for air circulation.

7
Your Kambrook Upright Fan Heater
1. 2 heat settings and fan only
setting control
2. Variable thermostat control
(KFH610 & KFH660 models only)
3. Swing switch to set oscillation
(KFH660 only)
4. Power indicator light
Not Shown
• Carry handle (at rear of unit)
• Safety tip-over cut-out switch
• ThermoGuard overheat
protection
• 2400 watt heating element
KFH600 model
KFH660 modelKFH610 model

8
Quick Start Guide
Turning the heater ON
Ensure that the heat setting
control dial is set to the
'OFF' position.
Plug the power cord into a
230V or 240V power point and
switch on.
Setting the heating mode
Turn the thermostat control to the
'MAX' position.
Turn the heat settings control to
the desired heat setting mode; '1'
Low (1200W), '2' High (2400W) or
fan only mode.
Setting the variable thermostat control
Turn the heat control to setting ‘2’
and turn the thermostat control
to the ‘MAX’ position to set the
heater into high heat mode.
Once a comfortable room
temperature has been reached,
slowly turn the thermostat control
towards the ‘MIN’ setting until
a click sound is heard. The
heater will now cut in and out to
maintain the room temperature.

9
Setting the oscillation
(KFH660 only)
Turning heater OFF
This function will work in any
mode. Switch the ‘SWING’ button
to ‘I’ to activate. This will allow
the heater to oscillate back and
forth. To stop the unit oscillating,
switch the ‘SWING’ button to ‘0’.
Turn the heat control dial to the
‘OFF’ position, turn off at the
power outlet and unplug from
the outlet.

10
Using Your Kambrook Heater
Before First Use
Remove your heater from its carton
and associated protective wrapping.
Unwind the cord to its full length and
remove any protective cardboard
or foam that may have been used
to minimise transportation damage.
Place the heater on a firm, level
surface in a stable upright position.
Visually inspect the air inlet and
outlets to ensure no foreign material is
blocking these areas.
Turning Your Heater On
Before turning the heater ON, turn
the variable thermostat control (for
KFH610 & KFH660 models only) to the
minimum position, then turn the heat
settings control to the ‘OFF’ position.
Plug the cord into a 230V or 240V
electrical outlet and switch on. Be
sure the plug fits tightly as a loose fit
will cause overheating and damage
the plug.
WARNING: To avoid an
electrical circuit overload,
it is recommended that
no other appliances are
plugged into the same
circuit with your heater
when you switch the
unit on.
Turn the variable thermostat control to
the maximum position, and then turn
the heat setting control to the desired
heat setting.
The fan heater has four modes;
OFF - Shuts off the heater and fan
FAN - For fan only operation
1 - Low heat setting (1200 watts)
2 - High heat setting (2400 watts)
Turning the heat settings control to
setting ‘1’ will set the heater into low
heat mode (1200 watts).
Turning the heat settings control to
setting ‘2’ will set the heater to high
heat mode (2400 watts).
Turning the heat settings control to fan
mode is for fan-only operation with
no output of heat.
To turn the heater OFF, turn the heat
setting control to the ‘OFF’ position,
and turn the variable thermostat
control (for KFH610 & KFH660 models
only) to 'MIN' position. Turn off at the
power outlet and remove the plug
from the power outlet.
WARNING: This heater
features a tip-over switch.
If the heater tips over, it
will automatically switch
off. Once placed back in
the upright position the
heater will automatically
switch on again.
Setting the Variable
Thermostat Control
(For KFH610 & KFH660
models only)
The variable thermostat control can
be used to maintain your desired
room temperature.
1. To set the desired temperature,
turn the heat setting control to
setting ‘2’ and turn the variable
thermostat control to the ‘MAX’
position to set the heater into
high heat mode.

11
2. Once the room temperature feels
comfortable, turn the variable
thermostat control slowly to the
minimal position until a click
sound is heard. This thermostat
control is now activated and
will automatically cycle the fan
heater off and on to maintain
the desired temperature.
Setting the Oscillation
(KFH660 only)
The oscillation function will work in
all heat and fan modes. Switch the
‘SWING’ button to ‘I’ to activate. This
will allow the heater to oscillate back
and forth. To stop the unit oscillating,
switch the ‘SWING’ button to ‘0’.
Safety Features
Safety Tip-Over Cut-Out Switch
There is a tip-over switch fitted to
the base of the heater. If the heater
is accidentally tipped over, the
heater will stop operating. Once
placed back into the upright position,
the heater will switch on again.
ThermoGuard Overheating
Safety Device
Your heater is fitted with a safety
device that switches off the heater in
the event of overheating.
Should this heater stop working,
turn off the heater and inspect the
air inlet and outlet for blockages.
Wait until the unit is fully cooled for
the protection system to reset before
attempting to restart the heater.
If the heater fails to operate or the
safety device switches off again,
take the heater to your nearest
Kambrook service centre for
examination or repair.
WARNING: In order to
avoid overheating do not
cover the fan heater.
WARNING: KFH600 heater
is not equipped with a
device to control the
room temperature. Do
not use KFH600 heater
in small rooms when
they are occupied by
persons not capable of
leaving the room on their
own, unless constant
supervision is provided.
Hints & Tips to Retain Heat in
Your Home
•Don’t overheat your home. The
temperature of a heated room in
winter should be 18-21°C.
•Your heater will work more
efficiently if you stick to Kambrook’s
recommended clearance spaces.
•Choose the right size heater for the
room type you want to heat.
•Zone off unoccupied rooms by
closing doors and only heat the
main living areas. Fit window
coverings like curtains to halve
winter heat loss.
•Put draft stoppers, such as a rolled
up towel, at the bottom of outside
doorways to keep out cold air.
•Keep the heat in and the cold
out by installing wall and ceiling
insulation.
•Avoid placing items too close to
the heater (both at the front and
back) for optimal air flow.