Kambrook SNUGASABUG KFH280 User manual

KFH280 Issue 1/06
Kambrook 461 Plummer Street, Port Melbourne 3207, Australia
Customer Service Line 1300 139 798
Customer Service Fax [phone]
Kambrook New Zealand,
Private Bag 94411, Greenmount, Auckland, New Zealand
Customer Service Line/Spare Parts 09 271 3980
Customer Service Fax [phone]
Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the illustrations in this book. Issue 1/06
Snugasabug™
Fan Heater

KAMBROOK SAFETY
Congratulations on your choice of
another quality Kambrook product.
Your Kambrook Snugasabug Fan Heater
has been designed and manufactured to
high standards of engineering.With proper
use and care, you can expect to receive
many years of trouble free service. Please
read these instructions carefully.
GENERAL CARE AND
SAFTY GUIDE
Before using your radiant heater,
please read these instructions carefully
and retain for future reference.
Use onlythe voltage specified on the
rating plate of the appliance.
Do not cover or restrict airflow to the
inlet of exhaust grilles in any manner as
the appliance may overheat and become
afire risk.
Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
Do not place appliance close to a heat
source.
Do not operate in areas where gasoline,
paint or other flammable liquids are used
or stored.
Do not use the appliance to dryclothes.
Do not insertor allow foreign objects to
enter any ventilation or exhaust opening,
as this may cause and electric shock, fire
or damage to the appliance.
Do not operate any appliance with a
damaged cord, plug or after the appliance
malfunctions or has been dropped or
damaged in any manner. Return to a
qualified electrical person for examination,
electrical or mechanical adjustment,
service or repair.
This appliance is intended for household
use only and not for commercial or
industrial use.
Use this heater onlyas described in this
manual.Any other use is not recommended
by the manufacturer and may cause fire,
electric shock or injury to persons.
The most common cause of overheating
is deposits of dust or fluff entering the
appliance. Ensurethese deposits are
removed regularly by unplugging the
appliance and vacuum cleaning air vents
and grilles.
Do not use abrasivecleaning products
on this appliance. Clean with a damp
cloth rinsed in hot soapy water only.
Always remove plug from the mains
before cleaning.
Do not connect the applicance to the
mains voltage until completely assembled
and adjusted.
This applicance is hot when in use.
To avoid burns, do not let bare skin touch
hot surfaces. Switch off and use handles
whereprovided when moving.
Always operate on a flat horizonatal surface.
Do not operate with cordset coiled as a
build up of heat is likely, which could be
sufficient to become a hazard.
Know your Kambrook Snugasabug Fan Heater
21
Controls and Parts
1. 2 heat settings plus fan only
2.Thermostat control
3.Tilt adjustment
4. On/Off Neon indicator
5.Thermo Guard protected
1
5
4
2
3

4
Heating
Turn the Heat Control Switch to the
desired power level (I or II).
Turn the thermostat knob clockwise
until the maximum temperature setting
is reached.
Thermostat
The thermostat is used to control the
room temperature. It acts as a switch and
does not vary the amount of heat output
from the heater.
Turn the thermostat knob clockwise
until the maximum temperature setting
is reached.
If the desired room temperature is
reached, slowlyturn the thermostat
knob anti-clockwise until you hear a
click.The heater will stop operating.
The heater will now turn on and off
automatically maintaining the room
temperature that you have set.
Frost Watch
The frost watch setting is used to prevent
the room temperature from falling below
approximately 5ºC.
Choose the power level desired on the
heat control switch.
Turn the thermostat knob to the * symbol
(minimum setting).The heater will now
switch on automatically if the room
temperature falls below 5ºC.
Tilt Base
The direction of the airflow may be
adjusted by tilting the body of the heater
up and down. Stopper pins are fitted to
limit the angle of adjustment.
CLEANING INSTRUCTIONS
The heater requires regular cleaning to
ensure trouble free operation.
1. Unplug the heater from the mains
supply before cleaning.
2. Use a damp cloth to clean the exterior
of the heater.
3. Use a vacuum cleaner to remove dust
and fluff from the inlet and outlet grilles.
4. Ensurethe heater is drybefore plugging
back into the mains supply.
The use of an extension cord with this
appliance is not recommended.
Do not remove plug from power socket
until the appliance has been switched off.
Do not remove plug from power socket
by pulling flex – always grip plug.
Always unplug appliance when not in use.
Do not allow cord to come in contact
with heated surfaces during operation.
Do not run cord under carpeting, throw
rugs, runners or the like.Arrange cord
away from traffic areas so that it will not
be tripped over.
Do not twist, kink or wrap the cord
around the appliance, as this may cause
the insulation to weaken and split.Always
ensurethat all cordhas been removed
from the cord storage area.
Do not store appliance while it is still hot.
This appliance is not intended for use by
young children or infirm persons without
supervision.
Young children should be supervised to
ensure they do not play with the appliance.
The appliance must not be located
immediatelybelowasocket-outlet.
Do not use this appliance in the
immediate surrounds of a bath, shower
or swimming pool.
If the supply cord is damaged, it must be
replaced by a qualified electrical person
in order to avoid a hazard.
Do not use this appliance outdoors, or
on wet surfaces.Avoid spilling liquid on
the appliance.
OPERATING
INSTRUCTIONS
Always choose a safe location for the
heater, keeping in mind the safety
precautions outlined.All of the controls
are located on the top of the heater for
easy accessibility and are protected by a
plastic control flap.
Neon Indicator
The heater has a power available red light.
When the heater has been turned on at
the wall, the light will be illuminated
indicating power is available to the heater.
Heat Controll Switch
Your heater is fitted with a multi-positional
rotary switch.The control switch
positions are:
0 Off
∞Fan only
I Low heat – 1200W
II High heat – 2400W
Check that the heat control switch is set
to the off position before plugging the
heater into the mains supply.
Fan
The fan setting is used to circulate the
room air.
Turn the thermostat clockwise until the
maximum temperature setting is reached.
The fan will now circulate the room air.
3

KAMBROOK
12 MONTH
WARRANTY
KAMBROOK warrants the purchaser
against defects in workmanship and
material, for a period of 12 months from
the date of purchase (3 months
commercial use).
Guarantee and purchase receipt for this
product are to be retained as proof of
purchase and must be presented if making
aclaim under the terms of the
KAMBROOK guarantee.
KAMBROOK reserves the right to
replace or repair the appliance within
the warranty period.
Warranty does not apply to any defect,
deterioration, loss or injury or damage
occasioned by, or as a result of the misuse
or abuse, negligent handling or if the product
has not been used in accordance with the
instructions.The guarantee excludes
breakages and consumable.
This warranty is void if there is evidence
of the product being tampered with by
unauthorised persons.
If the product includes one or a number
of accessories only the defective accessory
or product will be replaced.
In Australia, this KAMBROOK Guarantee
is additional to the conditions and
guarantees which are mandatory as
implied by the Trade Practices Act 1974
and State Territory legislation.
For service, spare parts or product
information in Australia, please call
KAMBROOK on the Customer Service
Line 1300 139 798.
For service, spare parts or product
information in New Zealand, please
call KAMBROOK New Zealand,
Greenmount, Auckland Phone [phone]
Fax [phone]. For spare parts phone
0800 273 845.
If claiming under this guarantee the product
must be returned freight prepaid.
YOUR PURCHASE RECORD (Please complete)
DATE OF PURCHASE______________________________________________________
MODEL NUMBER ________________________________________________________
SERIAL NUMBER (If applicable) ______________________________________________
PURCHASED FROM ______________________________________________________
Attach a copyof purchase
receipt here.
6
Please don’t return purchase record
unless you are making a claim
5
Notes