Kanguru Defender Basic+ User manual

Kanguru Defender Basic+
User Manual
Copyright 2014, All Rights Reserved. Model no: KDFB

2
NOTICES AND INFORMATION
Please be aware of the following points before using your Kanguru Defender Basic+
Copyright © 2014 Kanguru Solutions. All rights reserved.
Windows XP®, Windows Vista®, Windows 7® and Windows 8® are registered trademarks of Microsoft
Inc. All other brands or product names are trademarks of their respective companies or organizations.
Kanguru Solutions will not be held responsible for any illegal use of this product nor any losses incurred
while using this product. The user is solely responsible for the copyright laws, and is fully responsible
for any illegal actions taken.
Customer Service
To obtain service or technical support for your system, please contact Kanguru Solutions Technical
Support Department at 508-376-4245, or visit www.Kanguru.com for web support.
Legal notice
In no event shall Kanguru Solutions’ liability exceed the price paid for the product from direct, indirect,
special, incidental, or consequential software, or its documentation. Kanguru Solutions offers no refunds
for its products. Kanguru Solutions makes no warranty or representation, expressed, implied, or statutory,
with respect to its products or the contents or use of this documentation and all accompanying software,
and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Kanguru Solutions reserves the right to revise or update its products, software, or documentation without
obligation to notify any individual or entity.
Export Law Compliance
Regardless of any disclosure made to Kanguru Solutions pertaining to the ultimate destination of the
specific Kanguru product, you warrant that you will not export, directly or indirectly, any Kanguru
product without first obtaining the approval of Kanguru Solutions and the appropriate export license from
the Department of Commerce or other agency of the United States Government. Kanguru Solutions has
a wide range of products and each product family has different license requirements relative to exports.
Defragmenting Flash Memory Warning
Do not attempt to defragment your Kanguru Defender Basic+ flash drive. Flash memory does not need
to be defragmented and does not gain any performance by doing so. Defragmenting your flash drive can
actually degrade the flash memory which may reduce the drive’s total capacity and lifespan.
Notices and Information

3
Table of Contents
Table of Contents
1. Introduction..................................................................................................... 4
1.1 Technical Specifications ............................................................................. 6
2. Kanguru Defender Manager Basic+ ............................................................. 7
2.1 Running KDMBasic+................................................................................. 7
2.1.1 Windows Users .................................................................................. 7
2.1.2 Mac Users .......................................................................................... 9
2.2 The Setup Wizard ....................................................................................... 10
2.2.1 Selecting a Setup Language............................................................... 10
2.2.2 Activating On-board Antivirus Protection (Windows only) .............. 11
2.2.3 Setting a Password ............................................................................. 12
2.2.4 KRMC Cloud..................................................................................... 13
2.2.5 Contact Info ....................................................................................... 14
2.2.6 Resetting from the Setup Wizard ...................................................... 15
2.2.7 The Virtual Keyboard......................................................................... 16
2.3 Logging into KDMBasic+.......................................................................... 17
2.4 The Defender Basic+ Taskbar Menu .......................................................... 18
2.4.1 Exploring the Encrypted Partition ..................................................... 19
2.4.2 On-board Antivirus (Windows only) ................................................. 20
2.4.2.1 The Onboard Antivirus Console.............................................. 21
2.4.2.2 License..................................................................................... 22
2.5 Changing Your Password............................................................................ 23
2.6 KRMC Cloud Settings ............................................................................... 24
2.7 Changing Languages .................................................................................. 25
2.8 Online Documentation................................................................................ 26
2.9 About KDMBasic+..................................................................................... 26
2.10 Unmounting Your Defender Basic+ ......................................................... 27
2.10.1 Safely Removing from Windows..................................................... 27
2.10.2 Safely Removing from Mac OS X................................................... 28
3. Updating Your Defender Basic+ .................................................................... 29
3.1 Updating standard edition drives................................................................ 29
3.2 Updating KRMC enterprise edition drives................................................. 30
3.3 Verifying the download checksum ............................................................. 30
4. Warranty and Technical Support .................................................................. 31
5. Appendix A - Proxy Support.......................................................................... 32

4
Introduction
1. Introduction
The Kanguru Defender Basic+ is a hardware encrypted, tamper proof USB flash drive. The Defender
Basic+ contains two partitions: a CD-ROM partition and a secure, encrypted partition. The CD-ROM
partition contains the login application that will allow you to access the secured partition.
The Kanguru Defender Basic+ flash drive secures your sensitive data using:
• 256-bit AES hardware encryption
• Secure password protection
Package Contents
Please check the contents of the package you received. If any of the parts listed below are missing, please
contact Kanguru Solutions (508-376-4245) and you will be shipped replacement parts immediately.
• Kanguru Defender Basic+ USB Flash Drive
• Quick Start Guide
• Registration Form
Features
√256-bit AES hardware encryption
√FIPS 197 Validated
√Password protected data partition for your secure files
√Does NOT require Admin privileges
√Driverless installation (Plug & Play)
√High-strength aluminum housing
√Write protect switch
√On-board antivirus protection
√Custom security colors available (Red, Green, Yellow, Blue, Tan, Gray)
√HIPAA Compliant
√Sarbanes Oxley Compliant
√GLB Compliant
System Requirements
• 1 Available USB port (USB 2.0 Recommended)
• 256MB of internal DDR RAM or more
• 500MHz internal CPU or faster
• Operating Systems (32 and 64 bit compatible):
○Windows XP SP 3, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7,
Windows 8
○Mac OS X 10.5 and above (compatible with Intel-based Macs only)

5
Kanguru Remote Management Capability
Kanguru Defender Basic+ flash drives can be remotely managed using the Kanguru Remote Management
Console (KRMC). KRMC is a web-based application that gives administrators a complete USB
management and security system.
With KRMC you will be able to:
√Remotely delete all data on a target drive
√Schedule remote actions for present or future times
√Locate devices via IP address (IP Address / network location)
√Locate devices via hostname
√Create remote policy modifications like:
○Password Strength and Length (e.g. 10 characters: 2 upper, 2 numbers, etc)
○Limit Invalid Login Attempts (e.g. 3 retries before drive is wiped)
○Rate at which password should be changed (e.g. every 30, 60, or 90 days)
○Change user password
√Create user groups
KRMC Compatibility
There are two versions of KRMC that you can use to manage your drives:
• KRMC Enterprise Edition - KRMC is hosted on the customer’s own server
• KRMC Cloud - KRMC is hosted on a Kanguru server
The Kanguru Defender Basic+ is compatible with both KRMC Enterprise Edition as well as Cloud.
For more information about KRMC, visit: https://www.kanguru.com/
Introduction

6
Technical Specifications
1.1 Technical Specifications
The Kanguru Defender Basic+ comes in two models, depending on your drive’s capacity. Technical
specifications are different depending on your model.
1GB - 16GB Model 32GB - 128GB Model
General Specifications
Interface USB 2.0 (USB 1.1 compatible)
Encryption Features Hardware based 256-bit AES encryption
OS Compatibility Windows XP SP3*, Server 2003, Server 2008, Vista, 7, 8
Max OS X 10.5 and above (Intel based only)
Write Cycles 10,000 write cycles / block
Data Retention 10 years or more
*In line with Microsoft’s End-of-Support announcement for Windows XP, Kanguru Solutions is ending
support for the Windows XP platform. While our products have been quality tested internally on Windows
XP, we cannot guarantee normal product operation on an unsupported OS.
1GB - 16GB Defender Basic+ Specifications
Data Transfer Rate Read: 20 - 33 MB/s
Write: 10 - 13 MB/s
Weight 10g
Dimensions 64mm x 18.5mm x 9mm
Power (Read) Max Read: 5 VDC @ 122mA
Power (Write) Max Write: 5 VDC @ 182mA
32GB - 64GB Defender Basic+ Specifications
Data Transfer Rate Read: 31 MB/s
Write: 10 MB/s
Weight 15g
Dimensions 71mm x 27mm x 9mm
Power (Read) Max Read: 5 VDC @ 150mA
Power (Write) Max Write: 5 VDC @ 266mA

7
2. Kanguru Defender Manager Basic+
Kanguru Defender Manager Basic+ (referred to throughout this manual as KDMBasic+) is the client
software preloaded on the Defender’s CD-ROM partition. The user needs to login to KDMBasic+ in
order to access the secure, encrypted partition. KDMBasic+ comes pre-installed on your Defender. No
installation on your PC is necessary.
2.1 Running KDMBasic+
The Kanguru Defender Basic+ is compatible with multiple operating systems. Running the KDMBasic+
application can be different depending on the OS your computer is running.
2.1.1 Windows Users
To run KDMBasic+, simply connect your Defender Basic+ to your computer through a USB port. When
you connect your Defender Basic+, a CD-ROM partition and a removable disk partition should appear
under My Computer. If you are running Windows 7 and do not see the removable disk, please refer to
page 8 in this manual.
The KDMBasic+ application should start automatically.
If KDMBasic+ does not start automatically:
1. Open My Computer and open the Defender Basic+’s CD-ROM partition. The drive letter (e.g. D:,
E:, F:) will depend on your computer.
2. Double-click on the KDMBasic+.exe file to run the application.
Caution! The KDMBasic+.exe file needs to remain on your Defender Basic+’s CD-ROM partition at all
times. Always run the application from the CD-ROM partition. Do not try to copy or run KDMBasic+
from your computer’s local hard drive.
Kanguru Defender Manager Basic+

8
Attention Windows 7 Users
Windows 7 users may not see the removable disk partition until they have logged into KDMBasic+ (see
section 2.3 Logging into KDMBasic+ on page 17 for more information). This is normal.
If you are using the Defender Basic+ with the Windows 7 operating system and for any reason need to
see the removable disk before you log into KDMBasic+, you will need to configure Window’s Folder
and Search Options. Note: This is user preference only. There is no need to configure Windows in order
to use your Defender.
1. From My Computer, click on the Organize menu and then select Folder and search options.
2. The Folder Options window appears. Click on the View tab and then scroll down to the option for
Hidden Files and Folders. Select Show hidden files, folders, and drives.
3. Click on the OK button to finish configuring Windows. The removable disk is now visible before
you log into KDMBasic+.
Attention Windows 7 Users

9
2.1.2 Mac Users
To run KDMBasic+ from Mac OS X, connect your Defender Basic+ to your computer through a USB
port. A CD icon ‘KDMBasic+’ will appear on the desktop. Double click on the KDMBasic+ icon to open
it.
In the window that opens, double-click on the KDMBasic+.app file to launch the KDMBasic+ application.
Caution! The KDMBasic+.app file needs to remain on your Defender Basic+’s CD-ROM partition at
all times. Always run the application from the Defender Basic+’s CD-ROM partition. Do not try to copy
KDMBasic+ or run KDMBasic+ from your computer’s hard drive.
Note: The KDMBasic+ icon is not always displayed on the desktop. If you do not see the KDMBasic+
icon on your desktop, you can locate the KDMBasic+.app file in the CD-Rom partition through the
Finder window.
Kanguru Defender Manager Basic+

10
2.2 The Setup Wizard
When you start KDMBasic+ for the first time you will be greeted by the Setup Wizard. Follow the Setup
Wizard instructions to create a login password for KDMBasic+.
Note: Before you can set a KDMBasic+ password, the manual write protect switch must be set to the
unlock position (towards the USB connector).
2.2.1 Selecting a Setup Language
The default language for the Setup Wizard is English. To run the Setup Wizard in a different language:
1. From the Welcome screen, click on the Language selection menu. A list of available languages will
appear in a drop down menu. Select your desired language from the drop down menu. The Setup
Wizard will switch to the new language.
2. Click on the Next button to continue to the next step.
The Setup Wizard / Selecting a Setup Language

11
2.2.2 Activating On-board Antivirus Protection (Windows only)
KDMBasic+ will automatically check if your device has a valid antivirus license key. The drive will need
to be connected to a computer with internet access in order to register for on-board antivirus protection.
If your Defender does not already have a valid antivirus license key, then you must fill out the following
registration form with the required information and then click on the Apply button in order to activate
your free antivirus protection trial.
Click on the Skip button if you do not wish to activate antivirus protection. IMPORTANT! If you
decide to skip activating your antivirus now, you will not be able to activate it in the future without first
resetting your drive to the factory default setting.
Click on the Next button to continue with creating your login password.
Activating On-board Antivirus Protection

12
2.2.3 Setting a Password
Your password is used to login to your Defender Basic+’s secure partition after you have completed the
Setup Wizard. To create your login password from the Set Password screen:
1. Enter your password in the Password field. For security reasons, it is recommended that you
incorporate letters, numbers and symbols to achieve maximum security.
The Password Info window will inform you if there are any password requirements. It updates in
real time. Disregard the messages in the Password Info box until you have finished entering your
password into both the Password and Confirm Password fields.
2. Enter the same password in the Confirm Password field for verification. If the passwords you
entered into both fields match then you will receive a notification in the Password Info box.
3. Click on the Apply button to set your password. Once the password has been set you will see the
following message in the Password Info box:
4. Click the Next button. KDMBasic+ will automatically configure the security parameters and
complete the setup process.
Setting a Password

13
2.2.4 KRMC Cloud
Note: This section does not apply to Defender Basic+ drives that are being managed with the Kanguru
Remote Management Console (KRMC) Enterprise Edition.
The Kanguru Defender Basic+ can be remotely managed using the Kanguru Remote Management
Console (KRMC). KRMC Cloud is hosted on Kanguru’s server and KRMC Cloud functionality must be
enabled on the drive in order for it to be managed by KRMC.
To Enable KRMC Cloud functionality:
1. Select the Enable KRMC Cloud option and then click on the Apply button.
2. A dialog box will appear asking if you want to register your device with KRMC Cloud. Click on
the Yes button.
3. Your web browser will open and direct you to the KRMC Cloud login page.
4. Purchase a license for your drive in order to use it with KRMC Cloud.
If you choose not to remotely manage your Defender using KRMC Cloud, select the Disable KRMC
Cloud option and then click on the Apply button. You will not be able to enable KRMC Cloud
functionality afterwards without first resetting the drive.
Click on the Next button to continue setting up your drive.
KRMC Cloud

14
2.2.5 Contact Info
Note: This section does not apply to drives that are being managed with the Kanguru Remote Management
Console (KRMC) Enterprise Edition.
Your contact info will be saved to the drive. If you are managing your drive using KRMC Cloud, the
information entered here will be automatically be imported to the KRMC Cloud server when you register
your Defender Basic+ with KRMC Cloud.
Fill in your information in the appropriate fields (Device Name, Phone Number and Email are required
fields) and then click on the Apply button. A window will appear confirming that your data has been
saved. Click on the OK button to close the window and then click on the Next button to finish setting
up your drive.
Congratulations! Your Kanguru Defender Basic+ is now ready for use.
Contact Info

15
2.2.6 Resetting from the Setup Wizard
If you experience any problems while running the Setup Wizard, you may have to perform a device reset
before you can complete the setup process.
Caution! Performing the reset function will format the device’s secure encrypted partition. All data
stored on the secure partition will be lost.
To perform a device reset from the Setup Wizard:
1. From anywhere in the Setup Wizard, click on the Prev button until you return to the Start Screen.
2. On the Welcome Screen you will see a Reset button at the bottom of the window. Click on the
Reset button.
3. A dialog box appears asking you to confirm the reset. Click on Ye s to reset your device to the
factory default settings.
The Setup Wizard will run again, after the device has been reset to the factory default setting.
Resetting from the Setup Wizard

16
2.2.7 The Virtual Keyboard
The virtual keyboard feature can be accessed anytime you are entering your KDMBasic+ login password.
It can be used when entering your password to prevent keylogging applications from recording your key
strokes and potentially stealing your password.
To use the virtual keyboard to enter your password:
1. From the Set Password screen click on VK button. It is located near the bottom right of the Confirm
Password field.
2. The virtual keyboard will appear below the Setup Wizard window. Click on the keys on the virtual
keyboard using your mouse cursor to enter your password.
3. Click on the VK button again to close the virtual keyboard.
Note: You can click on the Shuffle key on the bottom right corner of the virtual keyboard to randomize
the virtual keyboard’s layout. Shuffling the keyboard layout prevents mouse tracking software from
spying your password.
The Virtual Keyboard

17
2.3 Logging into KDMBasic+
After you have completed the Setup Wizard, anytime you run KDMBasic+ you will be required to login
using your security password. You need to provide the correct security password in order to access the
Defender Basic+’s secure partition.
When the login screen appears:
1. Enter your password in the Password field.
2. Click on the Login button.
Caution! If you enter your password incorrectly enough times in a row (seven is the default setting
but it may be different depending on your setup), for security purposes any data stored on the secure
partition will be erased. You will be issued an on screen warning when you have one attempt remaining,
to prevent accidental erasure. To cancel the login process, click on the Cancel button. Unplugging and
then reinserting your drive or manually running KDMBasic+ again will bring the login window back.
Once you have successfully logged in to KDMBasic+, the secure partition will be accessible through
My Computer or Windows Explorer. For more information on accessing the secure partition, see section
2.4.1 Exploring the Encrypted Partition on page 19.
Caution! Once you have logged into KDMBasic+, you should never disconnect your device without first
closing KDMBasic+ properly by clicking the taskbar icon and selecting Unmount Kanguru Defender
as described in section 1.1 Technical Specifications 6 on page 3.
Resetting from the Login Screen
In the event you have forgotten your password, you can use the Reset to Factory Default function to reset
your password. Caution! Using the Reset to Factory Default function will format and wipe all data off
the device! All data on the device will be lost!
To reset your Defender Basic+ to the factory default:
1. Start KDMBasic+.
2. When the login screen appears, click on the Reset button.
3. When you are prompted to confirm the reset, click on the Yes button.
4. When your password and data stored on the secure partition have been erased, the following
message will appear. Click on the OK button to complete the reset.
Logging into KDMBasic+

18
2.4 The Defender Basic+ Taskbar Menu
After you have logged into KDMBasic+, you will see a Kanguru Defender icon in the taskbar area
(Windows) or within the status area (Max OS X).
Note: The Kanguru Defender icon may be hidden in the Windows taskbar. Click on the Show hidden
icons button next to the taskbar to reveal any hidden taskbar icons.
When you click on the taskbar icon, the Defender Basic+ taskbar menu appears.
The Defender Basic+ taskbar menu contains the following items:
• Explore Security Drive : Open the secure partition in a new explorer window.
• Antivirus (Windows only): Disable or Enable real time scanning. Access the on-board antivirus
console to scan your device, a path or a file.
• Security Settings : Change your KDMBasic+ login password.
• Language : Select the language the KDMBasic+ menus are displayed in.
• Check for client updates : Manually check if a newer version of KDM is available for your device.
• Quick Start Guide : Download a digital copy of the Defender’s quick start guide.
• Defender User Manual : Download a digital copy of this user manual.
• About : View information regarding the version of KDMBasic+ currently on your device.
• Unmount Defender Manager Basic+ : Unmount the secure partition. This will close any secure,
online environments and disable access to the device’s encrypted partition.
Defender Basic+ Taskbar Menu
Icon in Mac status area
Icon in Windows taskbar

19
2.4.1 Exploring the Encrypted Partition
A key feature of the Defender Basic+ is drag & drop encryption to the secure, encrypted partition. The
encryption process is completely self-contained, which allows you to simply drag files that you want to
encrypt onto the drive using the standard copy and paste function. The Defender Basic+ automatically
encrypts these files as they are transferred to the secure partition, ensuring that your data is safe and
private.
To open the secure partition:
1. Login to KDMBasic+ to gain access to the secure partition.
2. Click on the KDMBasic+ icon located in the taskbar and then select Explore Security Drive
from the popup menu.
We recommend using either the drag & drop action, right-click copy/paste action, or the shortcut keys
(Ctrl+C and Ctrl+V) to copy and paste files and folders directly to and from the secure partition.
Note: Data saved on the secure partition are only accessible after you have successfully logged into
KDMBasic+.
Exploring the Encrypted Partition

20
2.4.2 On-board Antivirus (Windows only)
Note: If you didn’t activate antivirus during the Setup Wizard, you will have to reset your drive to the
factory settings and enable Antivirus before you can use the antivirus functionality.
You must register your device with Kanguru Solutions in order to take advantage of the Defender Basic+’s
on-board antivirus functions (see section 2.2.2 Activating On-board Antivirus Protection (Windows only)
on page 11).
Once your on-board antivirus has been activated, real-time virus scanning is automatically enabled
whenever you log into your device.
Note: Updates for the latest virus definitions are downloaded automatically when the device is connected
to a computer with internet access. If you disconnect the Defender Basic+ before the latest update has
finished downloading, it will save your place and continue the download the next time it is connected to
a computer with internet access.
Virus definitions are stored in the ‘System’ folder on the secure partition. If these files are deleted, they
will be automatically re-downloaded. If the device is reset to the factory default, these files will be
deleted and will need to be re-downloaded. Do not delete the ‘System’ folder or save any data besides
virus definitions to it.
On-board Antivirus