KAPTARLIFT AWD PROFESSIONAL User manual
1
100 Kg
MAX
MAX
107 cm
Can be used for styropor and wooden hives!
Fa és polisztirol kaptárakhoz használható!
Check out our promotion film on YouTube!
Nézze meg bemutató filmünket a YouTube-on!
Copyright © 2019 AWD Professional Kaptarlift. All rights reserved.
Keyword: Kaptarlift
Keresőszó: Kaptárlift
Maximum clamping size: 70 cm!
Maximális befoglaló méret: 70 cm!
Seller:
Eladó:
Maximum lifting
weight is 100 kg.
Az emelő
maximális emelési
tömege 100 Kg!
Maximum lifting
height is 107 cm.
Maximális emelési
magasság 107 cm!
Overview
Parts
Settings
Usage
Guarantee
Áttekintés
Alkatrészek
Beállítás
Használat
Garancia
USER MANUAL
HASZNÁLATI ÚTMUTATÓ
EN
H
MODEL:
T
h
a
n
k
s
f
o
r
b
u
y
i
n
g
100 %
O
u
r
p
r
o
d
u
c
t
!
This lift has been developed for beehives only! Any other kind of lifting can causes dam-
age. Maximum lifting weight is 100 kg. It can be used for polystyrene and wooden hives!
Maximum lifting height is 107 cm. Keep the area under the load free from objects and
people! On the maximum height the lift can turn over.
-
Before lifting, you have to make sure that the clamps are clamped properly to the hive.
Only operate the clamps, if xing handle is up.
Switch off the appliance after use, to present battery is discharged.
WARNINGS!
REMOVAL OF PROTECTIVE EQUIPMENT CAN LEAD TO AN ACCIDENT!
DO NOT USE IT WITHOUT PROTECTIVE EQUIPMENT!
THE CONVERSION OF THE DEVICE WILL RESULT IN
THE CANCELLATION OF THE GUARANTEE!
3
USER MANUAL
Overwiev 04
Overwiev 05
Battery tting 06
On / Off 06
Gripping handle usage 07
Gripping handle usage 08
Controls 09
Charging 10
Wheel remove 10
Chain setting for lifting 11
Useful tips 12
Self lifting 12
Screw gaps 13
Maintenance 13
Maintenance 14
Summary 15
Dimensions 16
Parameters 17
Guarantee 18
Notes 18
OVERVIEW
HANDLE /
UP LIMIT SWITCH /
UP SPROCKET /
SAEFTY GRID /
CHAIN
SLED
FORK-LIFT /
TENSION SPRING /
FIXING HANDLE /
SUSPENSION /
LOWER SPROCKET /
WHEELS /
DOWN SPROCKET
/
GRIPPING CLAMP /
DOWN LIMIT SWITCH
HAND PROTECTION
(DON’T REMOVE!) /
OVERVIEW
BATTERY /
CONTROLLERS /
COVER /
LIFTING GEAR /
LIFTER DRIVE /
DOWN LIMIT SWITCH /
TRANSAXLE WITH MOTOR /
CHARGE /
ON / OFF /
LIFTERDRIVE /
COVER /
BEEDRIVE /
TRANSAXLE /
FUSE 25 A
BACK VIEW
FRONT VIEW
VULCANIZED PLAITED RUBBER SURFACE
ON / OFF
BATTERY FITTING
BACK VIEW
CORRECT CONNECTOR POSITION
ALWAYS CHARGE THE BATTERY BEFORE USING IT!
Battery
ON
OFF
SWITCH /
GRIPPING HANDLE USAGE
TEXT MUST
ALWAYS FACE UPWARDS!
VULCANIZED PLAITED RUBBER SURFACE
HANDLE MUST BE IN FULLY UP POSITION
TO MOVE GRIPPERS
HANDLE MUST BE IN FULLY DOWN POSITION
TO LOCK GRIPPERS
DO NOT FORCE GRIPPERS WHEN HANDLE IS DOWN!
TOOTH DAMAGE
FIXING HANDLE USAGE /
FIXING AND GRIPPING HANDLE USAGE
LOCKED / UNLOCKED /
MINIMUM !
CORRECT LIFTING POSITION
CORRECT / WRONG /
Before lifting, you have to make sure that the
clamps are properly clamped to the hive. Only
move the clamps, if the xing handle is up.
-
h
~1/3h~2/3h
h
~1/3h~2/3h
1.
2.
CONTROLS
1. STOP/
2. VARIABLE SPEED CONTROL /
1. STOP/
2. CONTINUOUSLY SPEED CONTROL /
GREEN /
YELLOW /
RED /
FULL /
HALF /
EMPTY /
REVERSE /
UP / DOWN
BEEDRIVE /
LIFTERDRIVE /
DRIVE WHEEL /
1.
2.
BATTERY STATUS /
107 cm
CORRECT /
1.
2.
1.
2.
TO INCREASE SPEED PUSH FURTHER DOWN
TO REVERSE DIRECTION PUSH BUTTON
1.
2.
3.
4.
1.
2.
3.
4.
WHEEL CHANGE
DIASSEMBLING
ASSEMBLING
1. WHEEL /
2. AXEL KEY /
SCREW WASHER /
4. WHEEL NUT /
1. WHEEL NUT /
SCREW WASHER /
3. WHEEL /
4. AXLE KEY /
CHARGING
USA 115 V
LITHIUM ION BATTERY!
-
ONLY USE OWN LITHIUM
ION CHARGER!
1.
2.
3.
4.
1.
2.
3.
4.
11
CHAIN SETTING FOR LIFTING
1. PUSH THE CHAIN TENSION WITH
SCREWDRIVER
YOU HAVE TO LOOSEN THE
SCREWS ON BOTH SIDES
ONLY SELF WEIGHT
ONLY SELF WEIGHT
3
3. TIGHTEN SCREWS AFTER AUTOMATIC CHAIN TENSION WITH THE MODULE WEIGHT
TURN OFF THE UNIT
BEFORE SETTING! /
USEFUL TIPS
SELF LIFTING
FORK-LIFT SETUP
ROLLING FORK
WING NUT
LOADING ONTO THE LORRY
FRONT VIEW
180˚
MAX
60 KG
13
SCREW GAPS
OPTIMAL WHEEL PRESSURE
a.
b.
c.
d.
a.
b.
c.
d.
1 mm!
1 mm!
TOP VIEW
MAINTENANCE
2 Bar
UPPER SPROCKET LUBRICATION
KEEP IN A DRY STORAGE
SPACE
LOWER SPROCKET LUBRICATION
RAIL LUBRICATION
SUMMARY
- HasználHatja polisztirol és fa kaptárakHoz is
- Munkaidő: 4 óra MozgaTÁS éS eMeléSSel együTT
- TÖlTéSi idő: 6 óra
- MagaSSÁg: 167CM
- TelJeS SÚly: 54kg
- eMeléSi MagaSSÁg: 107CM
- eMeléSi SÚly: 100kg
- MaXiMÁliS SzorÍTó MéreT 38CM-Től 70CM-ig
- lÍTiuM-ion akkuMulÁTor (karBanTarTÁS MenTeS) 24V 20,8ah
- az akkuMulÁTor éleTTarTaMa 1000 CikluS
- eMeléS lÁnC alkalMazÁSÁVal
- ÖneMeléSi FunkCió
- MaXiMÁliS SeBeSSég 6,5kM/h
- kéT kerék MeghaJTÁS diFFerenCiÁlMŰVel (karBanTarTÁSMenTeS)
- a diFFerenCiÁlMŰBen TalÁlhaTó MoTor TelJeSÍTMénye: 500W
- SzéleS kerekek, 15/6.00-6
- kiVÁló MozgÁS FÖldÖn éS hoMokoS TalaJon
- a kaPTÁrliFT VédeTTSégi oSzTÁlya iP44.
- horganyzoTT FelüleT
DIMENSIONS
WEIGHT
430
740
1670
60
165
TOP SPEED / 6,5 KM/H
RUNNING TIME / 4 HOURS /
CHARGING TIME / 6 HOURS /
LIFTING HEIGHT / 107 CM
MAX. CLAMPING SIZE / 38-70 CM
DIMENSIONS / 167 CM X 68,5 CM X 48 CM
WHEEL SIZE / 15 / 5.00-6
WEIGHT / 54 KG
SURFACE / GALVANIZED /
PARAMETERS
SUITABLE VOLTAGE / 24 V
POWER OF MOTOR / 24 V 500 W
UNDER VOLTAGE LIMIT / 20 V ± 0.5 V
CURRENT LIMIT / 28 A ± 1A SHORT VOLTAGE
SPEED REGULATOR / 1-4 V (THROTTLE)
SUITABLE VOLTAGE / 24 V
POWER OF MOTOR / 24 V 500 W
CURRENT LIMIT / 20 A ± 1A SHORT VOLTAGE
UNDER VOLTAGE LIMIT / 20 V ± 0.5 V
SPEED REGULATOR / 1-4 V (THROTTLE)
VOLTAGE: 24 V
RATED CURRENT: 20 A
RATED SPEED: 2500 RPM
OUTPUT: 500 W
VOLTAGE: 24 V
RATED CURRENT: 8,5 A
RATED SPEED: 40 RPM
OUTPUT: 120 W
BATTERY EXPLOSION AND FIRE HAZARD! DO NOT DISASSEMBLE COVER! DO NOT THROW IN FIRE!
- MOST WIRES, SLENDER SCREWS, LARGE ANTS ETC.
- SPRAYING WATER
NOTE
TYPE / TÍPUS:
NUMBER / SZÁM:
WARRANTY PERIOD /
JÓTÁLLÁS IDEJE:
DATE OF PURCHASE /
VÁSÁRLÁS DÁTUMA:
SELLER OF SIGNATURE /
ELADÓ ALÁÍRÁSA:
STAMP / BÉLYEGZŐ:
GUARANTEE
www.beelui.com
e-mail.: mozgovilag@t-online.hu
Copyright © 2020 Kaptarlift. All rights reserved.
If you use this product,
your spine will be younger!
Other manuals for AWD PROFESSIONAL
1
Table of contents
Other KAPTARLIFT Lifting System manuals
