KAPTARLIFT MCHW User manual
1
100 Kg
MAX
MAX
107 cm
Can be used for styropor and wooden hives!
Fa és polisztirol kaptárakhoz használható!
Check out our promotion film on YouTube!
Nézze meg bemutató filmünket a YouTube-on!
Copyright © 2019 Manual CHW Kaptarlift. All rights reserved.
Keyword: Kaptarlift
Keresőszó: Kaptárlift
Maximum clamping size: 70 cm!
Maximális befoglaló méret: 70 cm!
MCHW
Seller:
Eladó:
Maximum lifting
weight is 100 kg.
Az emelő
maximális emelési
tömege 100 Kg!
Maximum lifting
height is 107 cm.
Maximális emelési
magasság 107 cm!
Overview
Parts
Settings
Usage
Guarantee
Áttekintés
Alkatrészek
Beállítás
Használat
Garancia
USER MANUAL
HASZNÁLATI ÚTMUTATÓ
EN
H
MODEL:
>> MANUAL CHW
T
h
a
n
k
s
f
o
r
b
u
y
i
n
g
100 %
O
u
r
p
r
o
d
u
c
t
!
REMOVAL OF PROTECTIVE EQUIPMENT CAN LEAD TO AN ACCIDENT!
DO NOT USE IT WITHOUT PROTECTIVE EQUIPMENT!
THE CONVERSION OF THE DEVICE WILL RESULT IN
THE CANCELLATION OF THE GUARANTEE!
KAPTÁRLIFT WITH CHAIN LIFTING SYSTEM
KAPTÁRLIFT HASZNÁLATI ÚTMUTATÓ
4
This lift has been developed for beehives only! Any other kind of lifting can causes dam-
age. Maximum lifting weight is 100 kg. It can be used for styropor and wooden hives!
Maximum lifting height is 107 cm. Keep the area under the load free from objects and
people! On the maximum height the lift can turn over.
-
Before lifting, you have to make sure that the clamps are clashed properly to the hive.
Only clash the clamps, if xing handle is up.
Before lifting, you have to make sure that the clamps are clashed properly to the hive.
Only clash the clamps, if xing handle is up.
WARNINGS!
USER MANUAL
Overwiev 05
Fixing and gripping handle 06
Lifting 08
Bonus option 08
Chain setting for lifting 09
Screw gaps 10
Angle setup 10
Mainteance 11
Dimensions 12
Guarantee 13
Note 13
OVERWIEV
HANDLE /
UP SPROCKET /
CHAIN GUARD /
DRIVE SPROCKET /
LIFTING ARM /
SLED /
FORK-LIFT /
TENSION SPRING /
FIXING HANDLE /
“C” RAIL /
SPRING /
GRIPPING CLAMP WITH
VULCANISED RUBBER /
WHEELS /
CHAIN TENSION /
SUSPENSION /
DOWN SPROCKET /
MIDDLE SPROCKET /
GRIPPING HANDLE USAGE
TEXT MUST ALWAYS
FACE UPWARDS!
VULCANIZED PLAITED RUBBER SURFACE
TOOTH DAMAGE
FIXING HANDLE USAGE /
FIXING AND GRIPPING HANDLE USAGE
CLOSED / OPEN /
MINIMUM !
CORRECT LIFTING POSITION
CORRECT / WRONG /
Before lifting, you have to make sure that the bits
are properly clashed to the hive. Only clash the
clamps, if the xing handle is up.
-
h
~1/3h~2/3h
h
~1/3h~2/3h
After lifting, let the winch safety
latch onto the brance.
USEFUL TIPS
LIFTING
FORK-LIFT SETUP
WING NUT
LEVER USAGE
FRONT VIEW
MAX
60 KG
107cm
CHAIN SETTING FOR LIFTING
1. STEP
Raise an empty hive (15 kg) to
adjust the correct chain tension.
THE CHAIN IS TOO
LOOSE
CORRECT CHAIN
TENSION
3. STEP
You have to screw loosening the screws.
Push down the the part. After you checking
the chain tension x the screws.
2. STEP
Support the chain tensioner
using a screwdriver.
2. LÉPÉS
SCREW GAPS
ANGLE SETUP
a.
b.
c.
d.
a.
b.
c.
d.
1 mm!
1 mm!
TOP VIEW
90
80
70
60
50
40
30
20
10
0
0
10
20
30
40
50
60
70
80
a. 27 mm
b. 30 mm
a.
b.
ONE WAY
WHEEL LOCK INSERTING
11
MAINTENANCE
KEEP IN A DRY STORAGE SPACE
CHAIN LUBRICATION
RAIL LUBRICATION
OPTIMAL WHEEL PRESSURE
1,5bar
DIMENSIONS
WEIGHT
700 427
705
60
170
1646
NOTE
TYPE / TÍPUS:
NUMBER / SZÁM:
WARRANTY PERIOD /
JÓTÁLLÁS IDEJE:
DATE OF SHOPPING /
VÁSÁRLÁS DÁTUMA:
SELLER OF SIGNATURE /
ELADÓ ALÁÍRÁSA:
STAMP / BÉLYEGZŐ:
GUARANTEE
www.beelui.com
e-mail.: mozgovilag@t-online.hu
Copyright © 2020 Kaptarlift. All rights reserved.
If you use this product,
your spine will be younger!
Other manuals for MCHW
1
Table of contents
Other KAPTARLIFT Lifting System manuals
