KARNO 5in1 STEAM MOP User manual

-1 -
This manual and the information herein is the property of Karno Australia Pty Ltd. Karno is a registered trademark.
KARNO 5in1 STEAM MOP INSTRUCTIONS
PARTS & FEATURES
Ergonomic Handle
Upper Cord Wrap Hook
Power Supply Cord
Extendable Metal Handle
Handle Lock Button
Power Switch(O/I) with LED ON/OFF Light
Steam adjustment knob
Water Tank Cap
Water Tank
Main Body
Attachment Lock Button (on Main Body)
Mop Head
Front Side Back Side

-2 -
This manual and the information herein is the property of Karno Australia Pty Ltd. Karno is a registered trademark.
ATTACHMENT ACCESSORIES
Glider Microfiber Cloth Measuring Cup Cleaning Pin
Jet Nozzle Round Brush(Brass) Round Brush(Nylon)
OPTIONAL ACCESSORIES
Window Cleaning
Telescopic Jet Hose Duster Window Cleaning Tool
Garment Cleaning Pad

-3 -
This manual and the information herein is the property of Karno Australia Pty Ltd. Karno is a registered trademark.
HOW TO ASSEMBLE
1) Before assembling the steam mop, please make sure the power switch is in
the “OFF” position.
2) Insert the Swivel Joint into
designated connection hole in the
Main Body.
3) Put the Microfiber Cloth Pad onto
the mop head. Fasten the Pad by tightening
the drawstring with the chord.
4) When using on carpet surfaces: Place the Mop Head,
with Microfiber Cloth in place on top of the
carpet glider.

-4 -
This manual and the information herein is the property of Karno Australia Pty Ltd. Karno is a registered trademark.
CAUTION:
Never assemble or remove the accessories while the unit is in operation.
HOW TO USE
1) Fill the Water Tank with water:
a) Open the twist sealed lid
b) Pour the water into Tank
2) Select one of the following Steam Regulator positions:
3) 1-Low, 2-Medium, 3-High and 4-Hot Spray
1-Low and 2-Medium Setting: Ideal for cleaning
hard floors surfaces such as linoleum, ceramic tiles,
wood,etc.
3-High Setting:ldeal for cleaning carpets and rugs.
4-High Spray Setting: Ideal for cleaning
bathroom, kitchen, window sills, etc.
NOTE: You can change the Steam Regulator position and

-5 -
This manual and the information herein is the property of Karno Australia Pty Ltd. Karno is a registered trademark.
change the steam output while operating the Karno 5in1 Steam Mop.
WARNINGS:
Do not use mop on heat and steam sensitive floors.
Never steam at one spot for too long. This can damage the floor surface.
Do not put hands or feet under the steam mop when switched on.
There may be some minor “spitting” of water mixed with the steam. This is
normal.
HOW TO ASSEMBLE THE OPTIONAL ACCESSORIES
Remove the Mop Head first
Insert the designated end of the
flexible hose into the designated
hole in the Main Unit
Lock in place using the
Lock Button on the Main Body
WINDOW CLEANING TOOL
1. Loosen the drawstring on the cloth, and install the cloth onto the
designated hooks on the Window Cleaning Tool Frame. Pull the drawstring
to secure the cloth in place.

-6 -
This manual and the information herein is the property of Karno Australia Pty Ltd. Karno is a registered trademark.
2. Attach the Window Cleaning Tool to the flexible hose as follows:
Align the lock button
on the flexible hose
with the designated
hole on the Window
Cleaning Tool Frame
and then push in the
flexible hose until it locks in place
DUSTER
1.Install the cleaning
cloth onto the
Duster Frame
HOW TO CLEAN
- Use the Cleaning Pin to remove scale deposits from the small hole of the steam
outlet in the Main Body.
- By rotating, and pushing the pin up and down
you will clean the steam outlet.
- Always ensure that all scale debris have been
removed from the steam outlet before reassembling.
- Continue swirling Cleaning Pin until no further
debris is evident.
Warranty Information
Karno Australia Pty Ltd passes on the 12 month manufacturer warranty for this product.
We have your details, including purchase date (delivery date) on file. Any warranty
claims are to be sent to [email protected].au
Replacement Pads
These can be purchased on the Karno website.