KaVo ESTETICA E30 Installation guide

Care instructions
ESTETICA E30

Manufacturer:
Kaltenbach & Voigt GmbH
Bismarckring 39
D-88400 Biberach
www.kavo.com
Distributed by:
KaVo Dental GmbH
Bismarckring 39
D-88400 Biberach
Phone [phone]
Fax [phone]

Table of contents
1 User instructions ................................................................................................................ 4
1.1 User guide .................................................................................................................... 4
1.1.1 Abbreviations ..................................................................................................... 4
1.1.2 Symbols ............................................................................................................ 4
1.1.3 Target group ...................................................................................................... 4
2 Reprocessing methods according to DIN EN ISO 17664 ................................................... 5
2.1 Instructions................................................................................................................... 5
2.2 General instructions for the reprocessing of KaVo treatment centres ................................... 6
2.2.1 Overview ESTETICA E30 reprocessing................................................................... 7
2.2.2 Reprocessing KaVo Screen One / KaVo Screen HD ................................................. 8
2.3 Reprocessing of the surfaces of treatment centre / upholstery............................................ 8
2.4 Preparation of the dentist element................................................................................... 10
2.4.1 Reprocessing of handle and holder pad/anti-slip mat .............................................. 10
2.4.2 Reprocessing of the instrument holder of the TM table............................................ 10
2.4.3 Reprocessing of the instrument arm S table........................................................... 11
2.4.4 Preparation of the triple function handpiece KaVo One ............................................ 12
2.4.5 Preparation of triple function handpiece................................................................. 14
2.4.6 Preparation of the instrument hoses ..................................................................... 17
2.4.7 Servicing the turbine return air filter ..................................................................... 18
2.4.8 Reprocessing KaVo ERGOcam One ....................................................................... 18
2.4.9 Reprocessing KaVo PiezoLED ............................................................................... 20
2.5 Reprocessing of the assistant element.............................................................................. 27
2.5.1 Preparing the handpiece holder ............................................................................ 27
2.5.2 Reprocessing of the suction hose connector........................................................... 28
2.5.3 Reprocessing of sieve inserts and suction hoses ..................................................... 29
2.6 Reprocessing of the patient element ................................................................................ 29
2.6.1 Reprocessing of the tumbler ................................................................................ 29
2.6.2 Reprocessing of tumbler holder and tumbler filler................................................... 29
2.6.3 Reprocessing of the spittoon bowl......................................................................... 30
2.7 Manual hygiene functions of the water-conducting system ................................................. 31
2.7.1 Manual intensive germ reduction .......................................................................... 31
2.8 Reprocessing of the suction system ................................................................................. 33
2.8.1 Cleaning and disinfection of the suction system including suction hoses.................... 33
3 Replenishing and checking the disinfectant.......................................................................35
3.1 Replenishing KaVo OXYGENAL 6 when using the water bottle............................................. 35
3.1.1 Filling the intensive germ reduction bottle ............................................................. 37
3.2 Check the OXYGENAL 6 concentration.............................................................................. 38
Care instructions ESTETICA E30
Table of contents
3 / 40

Care instructions ESTETICA E30
1 User instructions | 1.1 User guide
4 / 40
1 User instructions
1.1 User guide
Requirement
Read these instructions prior to first use to avoid misuse and prevent damage.
Note
Comply with the Instructions for Use of the ESTETICA E30 treatment unit!
1.1.1 Abbreviations
Ab-
brevi-
ation
Explanation
IfU Instructions for use
CI Care instructions
AI Assembly instructions
TI Technician's instructions
SC Safety checks
IEC International Electrotechnical Commission
RI Repair instructions
EMC Electromagnetic compatibility
Scaler Scaler (ZEG)
IR Infrared
IrDA Infrared Data Association
1.1.2 Symbols
Refer to the chapter on Safety/Warning symbol
Important information for users and service technicians
Action request
CE mark according to Medical Devices Directive EC 93/42
Thermodisinfectable at up to 95 °C (203 °F)
Suitable for steam sterilisation at up to 135 oC (275 °F)
1.1.3 Target group
This document is for dentists and dental office staff.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.1 Instructions
2 Reprocessing methods according to DIN EN ISO 17664
2.1 Instructions
The reprocessing consists of the following basic steps:
▪ Cleaning and disinfection ( manually or automatically)
▪ Sterilisation
Note
Comply with national hygiene requirements, e.g. RKI guidelines.
NOTICE
Product damage due to improper disinfection.
Malfunctions.
▶Use the disinfectant according to the specifications of the manufacturer.
▶No spray disinfection, perform wipe disinfection only.
▶Do not immerse product or parts of the product in liquids.
▶Mop up any spilled cleanser or disinfectant immediately.
CAUTION
Risk of injury during cleaning of the treatment unit.
Lack of instructions to the cleaning staff and lack of preparation of the treat-
ment unit can lead to the cleaning personnel sustaining injuries.
▶Only trained professionals and instructed cleaning personnel may be
present in the treatment rooms.
▶Position the chair for cleaning and turn the device off.
CAUTION
Improper disinfection may lead to health hazards and material dam-
age.
Infection hazard to users and patients.
Damage to the sterile product.
▶No hot air sterilisation, no chemical cold sterilisation, do not sterilise with
ethylene oxide.
CAUTION
Health hazard and property damage due to non-compliance with servi-
cing schedule.
Infection hazard to users and patients.
Product damage.
▶Comply with servicing schedule.
Note
The preparation methods for the instruments and motors are found in the
separate instructions for use that accompany the instrument and motor
packages.
5 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.2 General instructions for the reprocessing of KaVo
treatment centres
6 / 40
2.2 General instructions for the reprocessing of KaVo
treatment centres
Please comply with the general reprocessing instructions at all times. Detailed
product-specific reprocessing instructions are provided subsequently.
At the site of use ▶Remove any surface contamination using a disposable cloth/pa-
per towel.
Storage and transport KaVo recommends reprocessing as soon as possible after use.
Preparations for cleaning ▶Comply with product-specific reprocessing instructions.
Manual cleaning Fixtures:
▪ Brush or cloth
▪ Tap water 30 °C ± 5 °C
▶Remove any dirt on the surface using a suitable cleanser accord-
ing to the recommendations of the manufacturer. Before doing
so, check the compatibility of the cleanser on a inconspicuous
place of the treatment centre.
Automatic cleaning KaVo recommends thermodisinfection at up to 95 °C in accordance
with ISO 15883-1 e.g. Miele G 7781 / G 7881 using an alkaline
cleaning agent with a maximum pH value of 10.
▶For programme settings as well as cleansers and disinfectants to
be used, please refer to the Instructions for Use of the washer
disinfector.
▶Directly after automated cleaning/disinfection, treat the medical
device with the care products and systems provided by KaVo.
Manual disinfection ▶Perform wipe disinfection only, the use of spray disinfection and
disinfection baths is not feasible.
▶Wipe all outer surfaces with a soft cloth and an approved disin-
fectant.
Approved disinfectants:
▪ CaviCide / CaviWipes (Metrex)
▪ Microcide AF Liquid (Schülke & Mayr)
▪ FD 322 (Dürr Dental)
▪ Incidin Liquid (Ecolab)
▶Use disinfectants according to the manufacturer's Instructions for
Use.
▶Please note the disinfectant safety data sheet.
Automatic disinfection KaVo recommends washer disinfectors in accordance with EN ISO
15883-1, which are operated with alkaline cleaning agents with a pH
value of max. 10 (e.g. Miele G 7781 / G 7881 – Validation was car-
ried out with the "VARIO-TD" programme, cleaning agent "neodish-
er® mediclean" and rinsing agent "neodisher® mielclear" and only
applies to the material compatibility with KaVo products).
▶For programme settings as well as cleansers and disinfectants to
be used, please refer to the Instructions for Use of the washer
disinfector.
▶In order to prevent negative effects on the medical device, make
sure that the interior and the exterior of the medical device are
dry after completion of the cycle, and then grease it immediately
with servicing agents from the KaVo care system.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.2 General instructions for the reprocessing of KaVo
treatment centres
Manual drying ▶Supply dry, clean and uncontaminated compressed air according
to ISO 7494-2 only.
▶Blow off the outside and inside with compressed air until water
drops are no longer visible.
Automatic drying Usually, automatic drying is part of the cleaning/disinfection cycle of
the washer disinfector and should not be carried out above 95 °C.
Servicing ▶Discard damaged products.
Control and functional test ▶Perform a visual inspection to check for damage and wear and
tear.
▶Test products for function regularly.
Packaging ▶Use standardised packaging material. Sealing should not be un-
der tension.
▶Use sterile goods packaging in order to ensure sterility.
Sterilisation All sterilisable products are temperature-resistant up to max. 138
°C.
KaVo recommends sterilisation in a steam steriliser (autoclave) ac-
cording to EN 13060 / ISO 17665-1, e.g. STERIclave B 2200 / 2200
P (KaVo) or Citomat K-Series (Getinge).
▶Sterilise with a triple fractionated vacuum (B class steriliser);
hold for 4 minutes; 134°C ± 1 °C; overpressure: 2.13 bar.
Storage ▶Reprocessed products should be stored protected from dust with
minimum exposure to germs in a dry, dark and cool place.
▶Comply with the expiry date of the sterilised items.
2.2.1 Overview ESTETICA E30 reprocessing
Reprocessing items/medical
devices
Cleaning Disinfection Sterilisa-
tion
manual automatic manual automatic automatic
Surfaces
Device
X
X
Cushion
X
X
Light
X
X
See also:
2IfU KaVoLUX 540
LED / EDI / MAIA
Lights, handles
X
X
X
X
X
Dentist element
Handle TM table / handle cup S table
X
X
Cannula triple-function handpiece
X
X
X
Holder pad/anti-slip mat
X
X
X
X
X
Handpiece holder
X
X
Instrument arm S table
X
X
Assistant element
Connection parts of the suction hose
X
X
X
X
Patient element
Tumbler holder
X
X
Tumbler filler
X
X
Porcelain spittoon bowl
X
X
X
X
7 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.3 Reprocessing of the surfaces of treatment centre /
upholstery
8 / 40
2.2.2 Reprocessing KaVo Screen One / KaVo Screen HD
Cleaning and disinfection
NOTICE
Non-colour-fast textiles.
Non-colour-fast textiles can cause permanent discoloration.
▶Remove discolorations with water immediately.
NOTICE
Damage caused by spray disinfection.
Disinfectant gets into cracks and loosens the paint.
▶Do not use spray disinfection.
▶Only disinfect by wiping.
▶Clean the surfaces with a soft cloth and water, and wipe-disinfect them with
an approved surface disinfectant.
2.3 Reprocessing of the surfaces of treatment centre /
upholstery
Position the chair for cleaning
▶Adjust the backrest to vertical position and move the chair upward.
See also:
2Instructions for use ESTETICA E30
Turn device off
▶Switch off the unit at the main switch.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.3 Reprocessing of the surfaces of treatment centre /
upholstery
Cleaning and disinfecting the surfaces of treatment
unit / upholstery
NOTICE
Non-colour-fast textiles.
Non-colour-fast textiles can cause permanent discoloration.
▶Remove discolorations with water immediately.
Approved disinfectants:
▪ CaviCide / CaviWipes (Metrex)
▪ Microcide AF Liquid (Schülke & Mayr)
▪ FD 322 (Dürr Dental)
▪ Incidin Liquid (Ecolab)
▶Clean the surfaces and upholstery with a soft cloth and water, and wipe-dis-
infect them with an approved surface disinfectant.
NOTICE
Damage caused by spray disinfection.
Disinfectant gets into cracks and loosens the paint.
▶Do not use spray disinfection.
▶Only disinfect by wiping.
Cleaning and disinfection of the foot control
NOTICE
Damage caused by inappropriate use of water.
Damage to the foot control.
▶For cleaning, the foot control must not be immersed in water or placed un-
der running water.
▶Only wipe off. Do not spray.
9 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
10 / 40
2.4 Preparation of the dentist element
2.4.1 Reprocessing of handle and holder pad/anti-slip
mat
Note
The handle of the TM table cannot be detached.
Cleaning and disinfection of the handle of the TM table /
handle cup of the S table
▶Clean the handle (TM table) / handle cup (S table) with a soft cloth and wa-
ter, and wipe-disinfect it with an approved surface disinfectant.
Cleaning, disinfection, and sterilisation of holder pad/
anti-slip mat
▶Sterilise the holder pad and anti-slip mat by thermodisinfection.
2.4.2 Reprocessing of the instrument holder of the TM
table
Note
The handpiece holder can be removed for better cleaning.
Cleaning and disinfection of the handpiece holder
NOTICE
Damage caused by treatment in a washer disinfector.
▶Do not treat the instrument holder in a washer disinfector.
▶Pull the latches evenly outward and carefully remove the handpiece holder.
▶Clean the handpiece holder under running water.
▶Wipe-disinfect the instrument holder.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
Sterilize the instrument holder
NOTICE
Damage caused by sterilisation.
▶Do not sterilise the instrument holder.
2.4.3 Reprocessing of the instrument arm S table
Note
The swing-arm S-table (Mat. no. 10074755)) can be removed to facilitate
cleaning.
Cleaning and disinfection of the instrument arm S table
NOTICE
Damage caused by treatment in a washer disinfector.
▶Do not sterilise the instrument arm S table in a washer disinfector.
▶Take the handpieces off the hoses.
▶Take the roller out of the instrument arm.
▶Pull-off the instrument arm in an upward direction.
▶Clean the instrument arm and roller under running water.
▶Wipe the instrument arm S table with disinfectant.
Sterilisation of instrument arm S table
NOTICE
Damage caused by sterilisation.
▶Do not sterilise the instrument arm S table.
11 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
12 / 40
2.4.4 Preparation of the triple function handpiece KaVo
One
Note
Wet the O-rings of the gripping sleeves after sterilisation using silicone
grease (Mat. no. 1.000.6403) or KaVo Rota Spray 2 (Mat. no.
0.411.7510). After replacing the cannula, the air channel must be blown out
before the start of treatment to ensure that the air exiting during treatment
is dry.
Note
For the cleaning/preparation of the cannula of the triple-function handpiece
KaVo One, the cannula must be disassembled into the cannula tube and the
taper sleeve.
Cleaning of triple-function handpiece KaVo One
Automatic cleaning
NOTICE
Damage caused by improper cleaning/disinfection.
▶Do not sterilise the single parts of the cannula in a hot-air steriliser.
▶Do not place the single parts of the cannula in a disinfectant or ultrasonic
bath.
▶Single parts of the cannula should be subjected to thermodisinfection and
sterilisation.
Manual cleaning
Note
Combine manual cleaning with disinfection.
Internal cleaning
▶Leave the cannula and handpiece on the instrument, and activate the air
and water for 60 seconds.
External cleaning
Accessories required:
▪ Tap water 30oC ± 5oC
▪ Brush, e.g. medium-hard toothbrush
▶Hold the valve body of the handpiece and screw off the cannula.
▶Disassemble the cannula of the triple-function handpiece KaVo One into the
cannula tube and the taper sleeve.
▶Clean the cannula tube and taper sleeve by brushing them under flowing
water (at least tap water quality).
▶Immediately remove contamination from materials used in the dental prac-
tice (impression materials, caustic chemicals).
▶Carefully wipe off contamination from the cannula tip with a soft Q-tip or
soft cloth and alcohol.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
NOTICE
Damage caused by using a nozzle needle that is too long.
Damage to the internal hoses of the cannula.
▶Use a short nozzle needle (Mat. no. 1.004.4986) to clean the media exit
holes.
▶Carefully remove contamination from the media exit ports using the short
nozzle cleaning needle.
Disinfection of triple-function handpiece KaVo One
Manual disinfection
See also:
22.2 General instructions for the reprocessing of KaVo treatment centres,
Page 6
External disinfection
▶Wipe-disinfect the surfaces with a soft cloth.
Automatic disinfection
NOTICE
Damage caused by improper cleaning/disinfection.
▶Do not sterilise the single parts of the cannula in a hot-air steriliser.
▶Do not place the single parts of the cannula in a disinfectant or ultrasonic
bath.
▶Single parts of the cannula should be subjected to thermodisinfection and
sterilisation.
Drying of triple-function handpiece KaVo One
Manual drying
▶Blow off the outside and inside with compressed air until water drops are no
longer visible.
Automatic drying
Not applicable.
Sterilisation of triple-function handpiece KaVo One
Note
The cannula can be subjected to sterilisation.
▶Hold the valve body of the triple-function handpiece and screw off the can-
nula.
13 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
14 / 40
Sterilization in a steam sterilizer in compliance with DIN
EN 13060
▶Remove the taper sleeve from the cannula tube weld in sterile goods pack-
aging.
▶Sterilise with a triple fractionated vacuum (B class steriliser); hold for 4
minutes; 134°C ± 1°C; overpressure: 2.13bar.
NOTICE
Damage caused by over-heating.
Damage to the cannula.
▶Immediately remove the parts from the steriliser after the sterilisation cycle
is completed.
Storage
▶Reprocessed products should be stored protected from dust with minimum
exposure to germs in a dry, dark and cool place.
2.4.5 Preparation of triple function handpiece
Note
Wet the O-rings of the gripping sleeves after sterilisation using silicone
grease (Mat. no. 1.000.6403) or KaVo Rota Spray 2 (Mat. no.
0.411.7510). After replacing the cannula, the air channel must be blown out
before the start of treatment to ensure that the air exiting during treatment
is dry.
Cleaning of triple-function handpiece
Automatic cleaning
Not applicable.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
NOTICE
Damage caused by improper cleaning/disinfection.
▶Do not wash the gripping sleeve and the cannula in the washer disinfector.
▶Do not sterilise the gripping sleeve and the cannula in the hot-air steriliser.
▶Do not place the gripping sleeve and the cannula in a disinfectant or ultra-
sonic bath.
Manual cleaning
Note
Combine manual cleaning with disinfection.
Internal cleaning
▶Leave the gripping sleeve and cannula on the instrument, and activate the
air and water for 60 seconds.
External cleaning
CAUTION
Danger of injury if the valve body is hot (heating elements, high-pres-
sure lamp).
Risk of burn injury.
▶Switch off the unit at the main switch.
▶Let the handpiece cool after long use.
Accessories required:
▪ Tap water 30oC ± 5oC
▪ Brush, e.g. medium-hard toothbrush
▶Disassemble the gripping sleeve and cannula.
▶Detach the key part from the gripping sleeve.
▶Clean the key part, gripping sleeve and cannula by brushing them under
running water (at least tap water quality).
▶Immediately remove contamination from materials used in the dental prac-
tice (impression materials, caustic chemicals).
▶Carefully wipe off contamination from the cannula tip with a soft Q-tip or
soft cloth and water.
NOTICE
Damage caused by using a nozzle needle that is too long.
Damage to the internal hoses of the cannula.
▶Use a short nozzle needle (Mat. no. 1.004.4986) to clean the media exit
holes.
15 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
16 / 40
▶Carefully remove contamination from the media exit ports using the short
nozzle cleaning needle.
Disinfection of triple-function handpiece
Manual disinfection
External disinfection
▶Wipe-disinfect the surfaces with a soft cloth.
Automatic disinfection
Not applicable.
NOTICE
Damage caused by improper cleaning/disinfection.
▶Do not wash the gripping sleeve and the cannula in the washer disinfector.
▶Do not sterilise the gripping sleeve and the cannula in the hot-air steriliser.
▶Do not place the gripping sleeve and the cannula in a disinfectant or ultra-
sonic bath.
Drying of triple-function handpiece
Manual drying
▶Blow off the outside and inside with compressed air until water drops are no
longer visible.
Automatic drying
Not applicable.
Care of triple function handpiece
Requirement
The multifunctional handpiece has been prepared.
▶Apply KaVo silicone grease (Mat. no. 10006403) or KaVo Rota Spray 2
(Mat. no. 04117510) to the O-rings of the joint between the gripping
sleeve and cannula. Use cotton buds for this purpose.
Sterilisation of triple-function handpiece
Note
The grip sleeve and cannula can be sterilised.
▶Hold the 3-way or multifunctional handpiece at the gripping sleeve and take
off the cannula with a slight twisting motion.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
▶Pull the gripping sleeve off the valve body.
Sterilization in a steam sterilizer in compliance with DIN
EN 13060
▶Weld the cannula and grip sleeve in sterile goods packaging.
▶Sterilise with a triple fractionated vacuum (B class steriliser); hold for 4
minutes; 134°C ± 1 °C; overpressure: 2.13 bar.
NOTICE
Damage caused by over-heating.
Damage to the gripping sleeve.
▶Immediately remove the parts from the steriliser after the sterilisation cycle
is completed.
Storage
▶Reprocessed products should be stored protected from dust with minimum
exposure to germs in a dry, dark and cool place.
2.4.6 Preparation of the instrument hoses
Cleaning and disinfection of handpiece hoses
▶Clean the hoses and couplings with a cloth and water.
NOTICE
Damage caused by spray disinfection.
▶Do not subject instrument hoses to spray disinfection.
▶Subject instrument hoses to wipe disinfection.
17 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
18 / 40
2.4.7 Servicing the turbine return air filter
Cleaning the turbine return air filter
Note
The liquid collector must be checked weekly.
▶If there is any liquid in the filter, drain the liquid and replace the O-rings of
the multiflex couplings.
▶If necessary, replace the turbine return air filter (Mat. no. 02003098) and
clean the filter holder.
Note
The turbine return air filter is in the same position in the dentist element vari-
ant with S table.
2.4.8 Reprocessing KaVo ERGOcam One
Note
The camera handle cannot be sterilised or disinfected with heat.

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
Cleaning
Note
Disinfect the camera before cleaning.
Disinfect after cleaning if necessary.
Exterior cleaning by hand
NOTICE
Damage to the camera due to improper cleaning.
Destroys the surface or the optical system of the camera.
▶Do not use abrasives or aggressive cleansers!
▶Do not immerse the camera in liquids!
▶Switch main device switch off.
▶Remove the camera.
▶Clean the surface with a soft cloth and mild liquid cleaning agent.
Disinfection
Exterior disinfection by hand
WARNING
Highly flammable gases-.
Explosion.
▶Allow product to cool before disinfecting.
NOTICE
Damage to the camera due to improper disinfection.
Irreversible destruction of the camera.
▶Disinfect with wipes only, do not use disinfectant sprays!
▶Do not immerse the camera in liquids!
▶Do not sterilise the camera in an autoclave!
▶Do not store the camera in Steri pack!
▶Do not sterilise the camera with hot air or in a washer disinfector!
▶Switch main device switch off.
▶Allow the camera to cool down.
▶Remove the camera.
▶Disinfect the surface using a soft wipe and disinfectant.
19 / 40

Care instructions ESTETICA E30
2 Reprocessing methods according to DIN EN ISO 17664 | 2.4 Preparation of the dentist element
20 / 40
Approved disinfectants:
▪ CaviCide / CaviWipes (Metrex)
▪ Microcide AF Liquid (Schülke & Mayr)
▪ FD 322 (Dürr Dental)
▪ Incidin Liquid (Ecolab)
Note
The exterior of the camera and camera hose can be disinfected with chemical
disinfectants.
Comply with the manufacturer's instructions for use with regard to the applic-
ation range. and exposure time.
NOTICE
Material damage due to use of non-approved disinfectant.
Damage to the camera.
▶Use approved disinfectants only.
2.4.9 Reprocessing KaVo PiezoLED
Cleaning
NOTICE
Malfunctions from cleaning in the ultrasonic unit.
Defects in the device.
▶Only clean manually or in a washer disinfector!
▶Only product parts bearing the automatic cleaning symbol may be subjec-
ted to automatic cleaning.
The subsequent cleaning/disinfection must be started within 2 hours.