Kawaii HG 20S User manual

SAVE THESE INSTRUCTIONS
HG 20S Massage Chair
Instruction Manual

01
Thank you for purchasing our product! Please read this instruction manual carefully
before using the product. Please pay close attention to important safety warnings,
and properly store this instruction manual for future use.
NOTE: Our company reserves the right to revise the design and description of this
product without any further notice.
02
04
05
06
13
CONTENTS
Safety and Maintenance
Names and Functions of Components
Functions
Method of Usage
Product Specification

01
Thank you for purchasing our product! Please read this instruction manual carefully
before using the product. Please pay close attention to important safety warnings,
and properly store this instruction manual for future use.
NOTE: Our company reserves the right to revise the design and description of this
product without any further notice.
02
04
05
06
13
CONTENTS
Safety and Maintenance
Names and Functions of Components
Functions
Method of Usage
Product Specification

0302
Safety and Maintenance Safety and Maintenance
1.IMPORTANT SAFETY WARNINGS:
Do not allow children to touch moveable parts of this product.
Please use a well-grounded power supply suited to this product.
Please pull out the plug after use and before cleaning to avoid injury to yourself
and damage to the product.
Please operate this product according to the instruction manual.
Do not use other accessories that are not recommended.
Do not use this product outdoors.
Please read this instruction manual carefully before using the product.
Any other form of usage of this product that is not listed in this instruction manual
is not recommended.
The recommended time for each usage is 15 minutes.
Please do not use this product if the leather is broken or damaged.
Please do not use this product if the cover or leather is damaged.
Please do not use this product if the radiator hole is covered or blocked.
Please do not drop anything into this product.
Please do not fall asleep while using this product.
Please do not use this product if you are intoxicated or not feeling well.
Please do not use this product within one hour after having a meal.
To avoid injuries, please do not make the massage functions too strong.
2.Type of Environment
Please do not use this product under high temperatures or in a moist environment
such as the bathroom.
Please do not use this product when the environmental temperatures sharply
change.
Please do not use this product under heavy-duty or dangerous environments.
Please do not use this product where there is not enough space or bad ventilation.
3.Type of Users:
People who are suffering from osteoporosis are not suitable to use this product.
People who are suffering from heart disease or carrying electronic medical
equipment such as a heart pacemaker are not suitable to use this product.
People who are suffering from fevers are not suitable to use this product.
Pregnant women or women that are on their menstrual cycle are not suitable to
use this product.
People who are injured or have skin disease are not suitable to use this product.
Children under the age of 14 or people with disabilities should not use this product
unless under supervision.
Do not use this product if any part of your body is wet.
This product has a heated surface. People who are sensitive to heat must be
careful when using the product.
4.Safety:
Check the voltage to see if it is suitable to the specification of this product.
Do not pull or insert the plug with wet hands.
Do not spill water on or inside the product to avoid electric shock and damage to
the product.
Do not damage the wires or change the circuit of the product.
Do not use a wet cloth to clean the electric parts such as the switch or plug.
Step away from the product if the power suddenly shuts off to avoid injury when
the power unexpectedly returns.
Stop using the product when it is not working correctly. Please contact the local
agent immediately.
Stop using the product if you are not feeling well and consult with a doctor.
This product is not intended for use by people (including children) with reduced
physical, sensory, or mental capabilities and lack of experience and knowledge of
the product unless they are being supervised or given instructions by a person that
is responsible for their safety.
Children should be supervised at all times to ensure that they do not play with the
product.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent, or an equally qualified technician in order to avoid injuries.
5.Maintenance
This product should be maintained by certain appointed agents. Users are
prohibited to disassemble or maintain the product by themselves.
Please do not forget to turn off the power after usage.
Do not use this product if the socket is loose.
If the product will be left unused for a long time, please curl up the wires and place
the product in a dry and clean environment.
Do not place the product under high temperatures or near fire. Avoid placing the
product under direct sunlight for long periods of time.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent, or an equally qualified technician in order to avoid injuries.
Please do not use a type of thinner, benzene or alcohol to clean the product.
The mechanical components of the product are specially designed and made so
that it is not necessary to specially maintain them.
Do not roll or pull the product on uneven ground.
Do not make the product work continuously for long periods of time.
6.Malfunction Solutions
It is natural for the motor or the movement of the product to produce sounds while
in usage.
If the controller does not work normally, please check the plug and socket to see if
they are properly connected. Also, please make sure the switch is turned on.
If the rated working time is over, the product will automatically activate the power-
off button. If the product works continuously for a long time, the temperature will
make the product automatically power off. The product should be used again after
half an hour's rest.
For any other questions or concerns, please contact the manufacturer or its
service agent.

0302
Safety and Maintenance Safety and Maintenance
1.IMPORTANT SAFETY WARNINGS:
Do not allow children to touch moveable parts of this product.
Please use a well-grounded power supply suited to this product.
Please pull out the plug after use and before cleaning to avoid injury to yourself
and damage to the product.
Please operate this product according to the instruction manual.
Do not use other accessories that are not recommended.
Do not use this product outdoors.
Please read this instruction manual carefully before using the product.
Any other form of usage of this product that is not listed in this instruction manual
is not recommended.
The recommended time for each usage is 15 minutes.
Please do not use this product if the leather is broken or damaged.
Please do not use this product if the cover or leather is damaged.
Please do not use this product if the radiator hole is covered or blocked.
Please do not drop anything into this product.
Please do not fall asleep while using this product.
Please do not use this product if you are intoxicated or not feeling well.
Please do not use this product within one hour after having a meal.
To avoid injuries, please do not make the massage functions too strong.
2.Type of Environment
Please do not use this product under high temperatures or in a moist environment
such as the bathroom.
Please do not use this product when the environmental temperatures sharply
change.
Please do not use this product under heavy-duty or dangerous environments.
Please do not use this product where there is not enough space or bad ventilation.
3.Type of Users:
People who are suffering from osteoporosis are not suitable to use this product.
People who are suffering from heart disease or carrying electronic medical
equipment such as a heart pacemaker are not suitable to use this product.
People who are suffering from fevers are not suitable to use this product.
Pregnant women or women that are on their menstrual cycle are not suitable to
use this product.
People who are injured or have skin disease are not suitable to use this product.
Children under the age of 14 or people with disabilities should not use this product
unless under supervision.
Do not use this product if any part of your body is wet.
This product has a heated surface. People who are sensitive to heat must be
careful when using the product.
4.Safety:
Check the voltage to see if it is suitable to the specification of this product.
Do not pull or insert the plug with wet hands.
Do not spill water on or inside the product to avoid electric shock and damage to
the product.
Do not damage the wires or change the circuit of the product.
Do not use a wet cloth to clean the electric parts such as the switch or plug.
Step away from the product if the power suddenly shuts off to avoid injury when
the power unexpectedly returns.
Stop using the product when it is not working correctly. Please contact the local
agent immediately.
Stop using the product if you are not feeling well and consult with a doctor.
This product is not intended for use by people (including children) with reduced
physical, sensory, or mental capabilities and lack of experience and knowledge of
the product unless they are being supervised or given instructions by a person that
is responsible for their safety.
Children should be supervised at all times to ensure that they do not play with the
product.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent, or an equally qualified technician in order to avoid injuries.
5.Maintenance
This product should be maintained by certain appointed agents. Users are
prohibited to disassemble or maintain the product by themselves.
Please do not forget to turn off the power after usage.
Do not use this product if the socket is loose.
If the product will be left unused for a long time, please curl up the wires and place
the product in a dry and clean environment.
Do not place the product under high temperatures or near fire. Avoid placing the
product under direct sunlight for long periods of time.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent, or an equally qualified technician in order to avoid injuries.
Please do not use a type of thinner, benzene or alcohol to clean the product.
The mechanical components of the product are specially designed and made so
that it is not necessary to specially maintain them.
Do not roll or pull the product on uneven ground.
Do not make the product work continuously for long periods of time.
6.Malfunction Solutions
It is natural for the motor or the movement of the product to produce sounds while
in usage.
If the controller does not work normally, please check the plug and socket to see if
they are properly connected. Also, please make sure the switch is turned on.
If the rated working time is over, the product will automatically activate the power-
off button. If the product works continuously for a long time, the temperature will
make the product automatically power off. The product should be used again after
half an hour's rest.
For any other questions or concerns, please contact the manufacturer or its
service agent.

04 05
1
3
4
6
9
8
10
7
5
12
11
14
13
15 16 17
Functions
The product is designed with a set of four-wheel driven mechanical massage
hands that moves up and down the back area.
The product automatically detects body curves and massage points so that it can
adjust the distance of the mechanical massage hand's movements. The
mechanical massage hands move back and forth according to the detected body
curve and massage points to make the massage experience more natural.
The product is designed with five stimulating massage programs: Shiatsu,
Kneading, Flapping, Knocking, and a Combination of Kneading and Flapping.
The product is set with 2 memory functions. The product can memorize and recall
settings.
Manually select the type of upper body massage functions which include fixed
point, partial point, and whole range. There are five speeds for each massage
function. For the Shiatsu, Flapping, and Knocking program, the width between the
massage hands can be adjusted to three levels of wide, medium, and narrow. For
the Fixed and Partial Point functions, the massage hands move up and down and
can be adjusted.
The air pressure massage function has three modes: full body air pressure, lower
body, and arms. The product is designed with 41 airbags and there are three
intensity levels to choose from.
The intensity of the buttock massage function is adjustable.
The upper arm area is designed to be able to reach people of different heights.
The calf rest can extend and be adjusted.
The calf rest can be lifted separately or together with the massage chair. The calf
rest can separate if it runs into a barrier, so please be careful.
The chair will reposition itself and the mechanical massage hands automatically
return to its original position after power shuts off.
The timer can be set to 15, 20, 25, or 30 minutes.
2
Names and Functions of Components Functions
1.Head Cushion
2.Upper Arm Air Bags
3.Arm Air Bags
4.Hand Air Bags
5.Seat Cushion
6.Calf Rest
7.Foot Frame
8.Back Cushion
9.Arm Rest
10.Decorative Strip
11.Back Cover
12.Air Vent
13.Rollers
14.Power Line and Plug
15.Power Switch
16.Fuse Box
17.Power Plug Socket

04 05
1
3
4
6
9
8
10
7
5
12
11
14
13
15 16 17
Functions
The product is designed with a set of four-wheel driven mechanical massage
hands that moves up and down the back area.
The product automatically detects body curves and massage points so that it can
adjust the distance of the mechanical massage hand's movements. The
mechanical massage hands move back and forth according to the detected body
curve and massage points to make the massage experience more natural.
The product is designed with five stimulating massage programs: Shiatsu,
Kneading, Flapping, Knocking, and a Combination of Kneading and Flapping.
The product is set with 2 memory functions. The product can memorize and recall
settings.
Manually select the type of upper body massage functions which include fixed
point, partial point, and whole range. There are five speeds for each massage
function. For the Shiatsu, Flapping, and Knocking program, the width between the
massage hands can be adjusted to three levels of wide, medium, and narrow. For
the Fixed and Partial Point functions, the massage hands move up and down and
can be adjusted.
The air pressure massage function has three modes: full body air pressure, lower
body, and arms. The product is designed with 41 airbags and there are three
intensity levels to choose from.
The intensity of the buttock massage function is adjustable.
The upper arm area is designed to be able to reach people of different heights.
The calf rest can extend and be adjusted.
The calf rest can be lifted separately or together with the massage chair. The calf
rest can separate if it runs into a barrier, so please be careful.
The chair will reposition itself and the mechanical massage hands automatically
return to its original position after power shuts off.
The timer can be set to 15, 20, 25, or 30 minutes.
2
Names and Functions of Components Functions
1.Head Cushion
2.Upper Arm Air Bags
3.Arm Air Bags
4.Hand Air Bags
5.Seat Cushion
6.Calf Rest
7.Foot Frame
8.Back Cushion
9.Arm Rest
10.Decorative Strip
11.Back Cover
12.Air Vent
13.Rollers
14.Power Line and Plug
15.Power Switch
16.Fuse Box
17.Power Plug Socket

0706
1).Press the red power button to start your massage.
2).The product will first detect your shoulder position and massage point. The chair
will signal you that the scan is complete with consistent beeping sounds. The
shoulder position can then be adjusted manually, and the massage chair will
automatically adjust to a certain angle. When detecting your shoulder position and
massage point, you can choose the memory mode (memo A and memo B) or
automatic mode (auto, comfort, and stretch).
3).If the roller is not in shoulder position, you can adjust it by pressing the up arrow or
down arrow buttons. It can be adjusted up to 6 levels.
Connect method figure Position of the power switch
Button Description
SHOULDER POSITION
ADJUST (UP BUTTON)
SHOULDER POSITION
ADJUST (DOWN BUTTON)
TIMING
&MODE
ADJUSTING SHOULDER
AIR
PRESSURE
INTENSITY
COMFORT
MEMORY MODE
AUTO KNEAD FLAP
KNEAD&FLAP
SPEED WIDTH
SHIATSU
KNOCK
MANUAL
MODE
BACK STRETCH
AUTO MODE
A B
BUTTOCKS
VIBRATION
AUTO
WIDTH
AIR PRESSURE
MODE
LOWER BODY ARM
INTENSITY
SPEED
STRONG
WEAK
STRETCH
Method of Usage Method of Usage
1. Press the power switch to ON to turn on the product.
2. Adjust the angle of the back rest, foot rest, and the retracted position of the
foot pad.
Adjust the angle according to your height.
Sit Up Button: Hold down the button to make the back rest slowly rise up while the
calf rest goes down. Release the button to stop. The product will automatically stop
and make fast alarming sounds when it has reached the maximum angle.
Lie Down Button: Hold down the button to make the back rest slowly go down while
the calf rest comes up. Release the button to stop. The product will automatically
stop and make fast alarming sounds when it has reached the maximum angle.
Adjusting the Angle of the Calf Rest
Calf Rest Rise Button: Hold down the button to make the calf rest slowly rise up.
Release the button to stop. The product will automatically stop and make fast
alarming sounds when it has reached the maximum angle.
Calf Rest Down Button: Hold down the button to make the calf rest slowly go down.
Release the button to stop. The product will automatically stop and make fast
alarming sounds when it has reached the maximum angle
3. Start your massage.
Adjust the position of the rollers upward to a suitable
shoulder position.
Adjust the position of the rollers downwards to a suitable
shoulder position.

0706
1).Press the red power button to start your massage.
2).The product will first detect your shoulder position and massage point. The chair
will signal you that the scan is complete with consistent beeping sounds. The
shoulder position can then be adjusted manually, and the massage chair will
automatically adjust to a certain angle. When detecting your shoulder position and
massage point, you can choose the memory mode (memo A and memo B) or
automatic mode (auto, comfort, and stretch).
3).If the roller is not in shoulder position, you can adjust it by pressing the up arrow or
down arrow buttons. It can be adjusted up to 6 levels.
Connect method figure Position of the power switch
Button Description
SHOULDER POSITION
ADJUST (UP BUTTON)
SHOULDER POSITION
ADJUST (DOWN BUTTON)
TIMING
&MODE
ADJUSTING SHOULDER
AIR
PRESSURE
INTENSITY
COMFORT
MEMORY MODE
AUTO KNEAD FLAP
KNEAD&FLAP
SPEED WIDTH
SHIATSU
KNOCK
MANUAL
MODE
BACK STRETCH
AUTO MODE
A B
BUTTOCKS
VIBRATION
AUTO
WIDTH
AIR PRESSURE
MODE
LOWER BODY ARM
INTENSITY
SPEED
STRONG
WEAK
STRETCH
Method of Usage Method of Usage
1. Press the power switch to ON to turn on the product.
2. Adjust the angle of the back rest, foot rest, and the retracted position of the
foot pad.
Adjust the angle according to your height.
Sit Up Button: Hold down the button to make the back rest slowly rise up while the
calf rest goes down. Release the button to stop. The product will automatically stop
and make fast alarming sounds when it has reached the maximum angle.
Lie Down Button: Hold down the button to make the back rest slowly go down while
the calf rest comes up. Release the button to stop. The product will automatically
stop and make fast alarming sounds when it has reached the maximum angle.
Adjusting the Angle of the Calf Rest
Calf Rest Rise Button: Hold down the button to make the calf rest slowly rise up.
Release the button to stop. The product will automatically stop and make fast
alarming sounds when it has reached the maximum angle.
Calf Rest Down Button: Hold down the button to make the calf rest slowly go down.
Release the button to stop. The product will automatically stop and make fast
alarming sounds when it has reached the maximum angle
3. Start your massage.
Adjust the position of the rollers upward to a suitable
shoulder position.
Adjust the position of the rollers downwards to a suitable
shoulder position.

0908
P1
AUTO
AUTO
AUTO
Lower body air pressure manual massage
Name Button Massage Content Massage Feature
Characterized
auto massage
Memory
A Massage
Memory
B Massage
Auto Massage
Function Button Description
Function Button Description
Air
pressure
Intensity
STRETCH
Strong
Middle
Week
LOWER BODY ARM
AIR PRESSURE MODE
LOWER BODY ARM
AIR PRESSURE MODE
LOWER BODY ARM
AIR PRESSURE MODE
Function Button
Technique
Function Button Description
Function Button Description
1 2 345
Narrow Middle Width
COMFORT
AUTO
P2
Method of Usage Method of Usage
4).The product starts at the ease mode by default, but you can select a different
massage mode.
A. Characterized upper body automatic massage
Display
Recalls memorized A massage
settings
Recalls memorized B massage
settings
Overall
Massage Massages the upper body
Neck and
Shoulder Massage
Massage focuses onthe neck and
shoulders
Back and
Waist Massage
Massage focuses onthe back and
waist
Fine Massage Supports blood circulation and relaxes
bone and muscle aches
Stretch
Massage Relieves and reduces fatigue
B. Upper and lower body manual massage
Display
Full upper body massage
Partial back massage
Fixed position massage
Display
Adjust massage hands
position (for fixed point
and partial modes)
Display Adjust Massage Hands
Speed and intensity
Speed, width, and
intensity
Speed and intensity
Speed, width, and
intensity
Speed, width, and
intensity
Display
Choose from 5 speed levels
Choose from 3 width levels
Display
Air Pressure
Mode 1: Massages arms, buttock, and foot area.
Choose from 3 intensity levels
Mode 2: Massages buttock and foot area.
Choose from 3 intensity levels
Mode 3: Massages arms. Choose from 3
intensity levels
Choose from 3 air pressure intensity levels:
Strong, Middle, and Weak
Massage hands move up
Massage hands move down

0908
P1
AUTO
AUTO
AUTO
Lower body air pressure manual massage
Name Button Massage Content Massage Feature
Characterized
auto massage
Memory
A Massage
Memory
B Massage
Auto Massage
Function Button Description
Function Button Description
Air
pressure
Intensity
STRETCH
Strong
Middle
Week
LOWER BODY ARM
AIR PRESSURE MODE
LOWER BODY ARM
AIR PRESSURE MODE
LOWER BODY ARM
AIR PRESSURE MODE
Function Button
Technique
Function Button Description
Function Button Description
1 2 345
Narrow Middle Width
COMFORT
AUTO
P2
Method of Usage Method of Usage
4).The product starts at the ease mode by default, but you can select a different
massage mode.
A. Characterized upper body automatic massage
Display
Recalls memorized A massage
settings
Recalls memorized B massage
settings
Overall
Massage Massages the upper body
Neck and
Shoulder Massage
Massage focuses onthe neck and
shoulders
Back and
Waist Massage
Massage focuses onthe back and
waist
Fine Massage Supports blood circulation and relaxes
bone and muscle aches
Stretch
Massage Relieves and reduces fatigue
B. Upper and lower body manual massage
Display
Full upper body massage
Partial back massage
Fixed position massage
Display
Adjust massage hands
position (for fixed point
and partial modes)
Display Adjust Massage Hands
Speed and intensity
Speed, width, and
intensity
Speed and intensity
Speed, width, and
intensity
Speed, width, and
intensity
Display
Choose from 5 speed levels
Choose from 3 width levels
Display
Air Pressure
Mode 1: Massages arms, buttock, and foot area.
Choose from 3 intensity levels
Mode 2: Massages buttock and foot area.
Choose from 3 intensity levels
Mode 3: Massages arms. Choose from 3
intensity levels
Choose from 3 air pressure intensity levels:
Strong, Middle, and Weak
Massage hands move up
Massage hands move down

11
10
Function Button
Description
Position for switching the power supply off Method for cutting off the power supply
NOTE
Figure 1
Figure 2 Figure 3
Function Button
Description
BUTTOCKS
VIBRATION
STRONG
WEAK
Figure 1 Figure 2 Figure 3 Figure 4
Zipper
Strong: LED ON
Weak:LED flashing
Method of Usage Method of Usage
C. Other manual functions
Display
Buttocks
Vibration
Buttocks vibration function
Strong
Weak
Choose from 2 strength levels for the
vibration function: Strong and Weak
Time
Setting
The timer can be set to 15, 20, 25, or 30
minutes.
Display
4.Turn the product off.
During the massage process, press the red power button or let the timer run out to
stop the product. When the controller displays EE , you can press the memory
A or B button to save the current settings. The controller will then display E1
or E2 .
If you do not want to save the current settings, you can press the red power button
again turn the product off, and the product will automatically restore back to its
original position.
NOTE
If the timer runs out and you do not press the memory buttons or the power button,
the product will turn off on its own, but the back rest and calf rest does not
automatically restore back to its original position.
Press the power switch to OFF to cut power from the product.
5. Calf rest extends and moves freely
The calf rest is able to extend and adjust to fit users of different heights. It also moves
freely to massage the foot from any angle.
Calf rest extends Calf rest moves freely
6. Arm Rest Installation
Pull the zipper up from the bottom edge of the arm rest. Connect the air tubes
between the chair frame and the arm rest. Insert the guide post on the arm rest
into the corresponding holes on the chair frame. Avoid bending the air tube and the
guide post (Figure 1).
Fix the arm rest onto the chair frame with two nails. Make sure to check that
nothing is bent before screwing the nails in (Figure 2).
Pull the zipper down. Make sure that the surface is smooth (Figure 3).
Installation is complete. Please do not yank, press, or twist the arm rest with force
when using the product (Figure 4).
1. When attempting to stand up, do not put weight down onto the arm rests to lift
yourself up. Use the edge of the arm rest to push yourself forward (Figure 1).
2. Do not push the top edge of the arm rest inwards (Figure 2).
3. Do not sit on top of the arm rest (Figure 3).
WARNING
WARNING WARNING

11
10
Function Button
Description
Position for switching the power supply off Method for cutting off the power supply
NOTE
Figure 1
Figure 2 Figure 3
Function Button
Description
BUTTOCKS
VIBRATION
STRONG
WEAK
Figure 1 Figure 2 Figure 3 Figure 4
Zipper
Strong: LED ON
Weak:LED flashing
Method of Usage Method of Usage
C. Other manual functions
Display
Buttocks
Vibration
Buttocks vibration function
Strong
Weak
Choose from 2 strength levels for the
vibration function: Strong and Weak
Time
Setting
The timer can be set to 15, 20, 25, or 30
minutes.
Display
4.Turn the product off.
During the massage process, press the red power button or let the timer run out to
stop the product. When the controller displays EE , you can press the memory
A or B button to save the current settings. The controller will then display E1
or E2 .
If you do not want to save the current settings, you can press the red power button
again turn the product off, and the product will automatically restore back to its
original position.
NOTE
If the timer runs out and you do not press the memory buttons or the power button,
the product will turn off on its own, but the back rest and calf rest does not
automatically restore back to its original position.
Press the power switch to OFF to cut power from the product.
5. Calf rest extends and moves freely
The calf rest is able to extend and adjust to fit users of different heights. It also moves
freely to massage the foot from any angle.
Calf rest extends Calf rest moves freely
6. Arm Rest Installation
Pull the zipper up from the bottom edge of the arm rest. Connect the air tubes
between the chair frame and the arm rest. Insert the guide post on the arm rest
into the corresponding holes on the chair frame. Avoid bending the air tube and the
guide post (Figure 1).
Fix the arm rest onto the chair frame with two nails. Make sure to check that
nothing is bent before screwing the nails in (Figure 2).
Pull the zipper down. Make sure that the surface is smooth (Figure 3).
Installation is complete. Please do not yank, press, or twist the arm rest with force
when using the product (Figure 4).
1. When attempting to stand up, do not put weight down onto the arm rests to lift
yourself up. Use the edge of the arm rest to push yourself forward (Figure 1).
2. Do not push the top edge of the arm rest inwards (Figure 2).
3. Do not sit on top of the arm rest (Figure 3).
WARNING
WARNING WARNING

MATERIAL PU LEATHER CLOTH WOOD
12 13
8.Floor Protection
Zipper
Method of Usage Method of Usage
Product Specification
7. Adjust the head cushion.
You can use the head cushion to reduce or increase the intensity of the massage
hands on the shoulder and neck area. Carefully decide where to place the head
cushion according to your needs. You can also remove the head cushion, but we
recommend you to use the head cushion to avoid injuries. The back rest padding
is connected to the product by a zipper (1). The head cushion is connected to the
back rest padding by velcro (2).
Velcro
Placing the heavy massage chair directly on wood floors for a long time could
damage the floor, so please place a carpet or rug under the massage chair to
avoid any damages.
CAUTION: Do not move the chair on its wheels on hard floors (wood, concrete, etc.)
or in a narrow space. We recommend that two people lift the chair together to
move it.
9. How to properly move the chair.
Make sure nothing is in your way before balancing the product on its wheels. Push
the chair forward or pull it backwards to your desired location.
Model: HG 20S
Name: Kawaii Massage Chair
Rated Voltage:110-120V~ 60Hz
220-240V~ 50Hz/60Hz
Rated Power Input: 120W
Standby Power: around 0.33W
Recommended Usage Time: 15 minutes
Safety Structure:Class
Material Introduction: PVC, PA, steel parts, electric parts, and electron parts.

MATERIAL PU LEATHER CLOTH WOOD
12 13
8.Floor Protection
Zipper
Method of Usage Method of Usage
Product Specification
7. Adjust the head cushion.
You can use the head cushion to reduce or increase the intensity of the massage
hands on the shoulder and neck area. Carefully decide where to place the head
cushion according to your needs. You can also remove the head cushion, but we
recommend you to use the head cushion to avoid injuries. The back rest padding
is connected to the product by a zipper (1). The head cushion is connected to the
back rest padding by velcro (2).
Velcro
Placing the heavy massage chair directly on wood floors for a long time could
damage the floor, so please place a carpet or rug under the massage chair to
avoid any damages.
CAUTION: Do not move the chair on its wheels on hard floors (wood, concrete, etc.)
or in a narrow space. We recommend that two people lift the chair together to
move it.
9. How to properly move the chair.
Make sure nothing is in your way before balancing the product on its wheels. Push
the chair forward or pull it backwards to your desired location.
Model: HG 20S
Name: Kawaii Massage Chair
Rated Voltage:110-120V~ 60Hz
220-240V~ 50Hz/60Hz
Rated Power Input: 120W
Standby Power: around 0.33W
Recommended Usage Time: 15 minutes
Safety Structure:Class
Material Introduction: PVC, PA, steel parts, electric parts, and electron parts.

SAVE THESE INSTRUCTIONS
HG 20S Massage Chair
Instruction Manual